73100-0259

12 11 10 9 BODY BRASS PLATED GOLD 5 4 3 2 1 .375 ±.0098 9.53 ±0.250 CENTER CONTACT BRASS PLATED GOLD H .225 ±.0079 5.72 ±0.200 INSULATOR TEFLON G 6 .500 ±.0098 12.70 ±0.250 MATERIALS AND FINISHES H 7 8 .198 ±.0098 5.04 ±0.250 NOTES: 1. SPECIAL SMB CAN NOT MATE TO STANDARD SMB G .275 ±.0059 6.99 ±0.150 .015 ±.0010 ⌀ 0.38 ±0.025 F .405 ±.0098 10.29 ±0.250 4 PLACES .150 ±.0079 3.81 ±0.200 F .110 ±.0059 2.79 ±0.150 4 PLACES .020 ±.0039 0.51 ±0.100 4 PLACES E E .020 ±.0031 ⌀ 0.51 ±0.080 .100 ±.0020 2.54 ±0.050 .100 ±.0020 2.54 ±0.050 D D .035 ±.0020 ⌀ 0.90 ±0.050 .100 ±.0020 2.54 ±0.050 .250 ±.0098 6.36 ±0.250 .100 ±.0020 2.54 ±0.050 C C .060 ±.0039 1.52 ±0.100 4 PLACES 73404-2330 73100-0259, ONE PER BAG 73100-0259 TRAY PART NO. PACKAGING .063 ±.0020 ⌀ 1.60 ±0.050 4 PLACES .040 ±.0031 SQ. 1.02 ±0.080 4 PLACES RECOMMENDED PCB HOLE .200 ±.0059 5.08 ±0.150 B B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION PS-73598-0104 ELECTRO/MECH. PERFOM. SPECIFICATION DESCRIPTION DIMENSION UNITS SCALE HYBRID 1:1 CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) A 2018/03/30 2017/11/07 2007/05/01 DATE B3 B2 B1 REV. DOCUMENT STATUS 12 FORMAT: master-tb-prod-C REVISION: H DATE: 2018/01/18 CHANGE TITLE AND ADDED NOTES PER 11900 ADDED TOLERANCE PER RF17-E129 REDREW IN SD ADDED 73404-2330 DESCRIPTION P1 RELEASE DATE 11 2018/05/03 10 ± 4 PLACES ± 3 PLACES ± 2 PLACES ± 1 PLACE ± 0 PLACES ± 2.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 08:38:03 9 ANGULAR TOL 8 7 6 5 EC NO: 174450 DRWN: ELIN CHK'D: YCHENG APPR: YCHENG INITIAL REVISION: DRWN: TFLAHERTY APPR: GHUBBARD THIRD ANGLE PROJECTION 4 2018/03/30 2018/05/03 2018/05/03 SMB JACK, R/A, PCB SPECIAL RECEPTACLE MATE TO .017 SMB-J/RA/PCB PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2007/05/01 1993/07/20 DRAWING SERIES C-SIZE 73100 3 SD-73100-0259 MATERIAL NUMBER PSD 001 CUSTOMER 731000259 GENERAL MARKET 2 B3 SHEET NUMBER 1 OF 1 1 A