73404-0710

12 11 10 9 7 8 5 6 4 3 2 1 MATERIALS AND FINISHES; H 20.02 REF .788 BODY, CRIMP TUBE: BRASS H PLATED NICKEL 3.25 HEX .128 CENTER CONTACT: PHOSPHOR BRONZE PLATED SEE TABLE INSULATOR: TEFLON G G OUTER CONTACT: BERYLLIUM COPPER SMB PLUG INTERFACE PLATED NICKEL RG-316 1.86 ±0.30 .073 ±.012 PACKAGE BY TRAY SEE 89542-0040 DRAWING 16.87 REF .664 F F 10.52 REF .414 9.53 REF .375 6.60 REF .260 ⌀ 0.61 REF E ⌀ 1.47 REF ⌀ 1.73 REF .152 11.30 REF .445 JACKET 5.21 REF .205 BRAID D ⌀ 3.25 REF .128 2.29 REF .090 DIELECTRIC PART # 73404-071* 73404-0711 73404-0710 PART NO ⌀ 3.86 REF .058 .068 D C E .024 30u" Au 10u" Au CONTACT PLATING THICKNESS C RECOMMENDED STRIPPING DIMENSIONS B PS-89675-3540 PRODUCT SPECIFICATION MIL-STD-348A, FIG. 311-2 INTERFACE B FUNCTIONAL THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION SCALE SYMBOLS DIMENSION UNITS CURRENT REV DESC: = DESCRIPTION SPECIFICATION = DOCUMENT STATUS 12 FORMAT: master-tb-prod-C REVISION: J DATE: 2020/01/14 RELEASE DATE 11 B1 2020/03/03 ADD -0711 PART NO PER EWR 13499-C REV DATE DESCRIPTION 10 9 8 7 6 0 1:1 GENERAL TOLERANCES (UNLESS SPECIFIED) ANGULAR TOL ± 4 PLACES ± DIVISIONAL 3 PLACES SYMBOLS ± 2 PLACES ± = A 0 HYBRID 0 1 PLACE ± 0 PLACES ± 2.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 5 EC NO: 633339 DRWN: JSU18 CHK'D: YCHENG APPR: YCHENG INITIAL REVISION: DRWN: SSHAH APPR: JWIENER THIRD ANGLE PROJECTION 4 2020/03/03 2020/03/18 2020/03/18 SMB PLUG STR RG-316 50 OHMS, EWR-1503 SMB-PC PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2007/03/20 2007/03/20 DRAWING SERIES C-SIZE 73404 3 SD-73404-071 MATERIAL NUMBER PSD 001 TS-SCI 2 B1 SHEET NUMBER CUSTOMER 1 OF 1 1 A