76020-5006

12 10 11 9 7 8 6 5 4 3 2 1 H H 1.60 MIN BOARD THICKNESS 2.0 TAIL LENGTH 2.5 PEG LENGTH 13.3 7.4 3.7 G G ⌖ ⌀0.15 13.20 ⌀2.45±0.10 9.75 UNPLATED SCREW HOLE B 1.20 F PIN G2b 3.70 �28.6� 6.15 1.25 KEEP-OUT ZONE F SEE NOTE 7 FOR ESD OPTION 2X 0.75 ROW G ROW F ROW E ROW D ROW C ROW B ROW A 15.44 E 1.9 (MATING POINT) A 13.20 4.62 E 9.00 6.89 1.70MAX 9.85 PIN A1a BACKPLANE (REF) D KEY SHOWN IN POSITION "E" 1.50 PIN A1b �2.6� ⌖ ⌀0.10 0.69 FROM TOP OF DC PCB TO ℄ OF PIN A1b ON BP �15.9� ⌖ ⌀0.10 ⌀0.46±0.05 PTH (⌀0.57 DRILL) (⌀0.88 PAD) D 18.10 (FULLY MATED) ⌀2.375±0.035 14 HOLES PER COLUMN UNPLATED PEG HOLE C C BACKPLANE (REF) B A DAUGHTERCARD HOLE PATTERN (CONNECTOR SIDE) NOTES: 1. MATERIALS: HOUSING - LIQUID CRYSTAL POLYMER (LCP)GLASS-FILLED, UL 94V-0 TERMINALS - HIGH PERFORMANCE COPPER ALLOY 2. FINISH: SELECTIVE GOLD (Au) IN CONTACT AREA, SELECTIVE MATTE TIN (Sn) IN TAIL AREA; NICKEL (Ni) UNDERPLATE OVERALL. 3. REFER TO MOLEX PRODUCT SPECIFICATION PS-75710-999 FOR PERFORMANCE SPECS. 4. PRODUCT IS PACKAGED PER PK-70873-607. 5. THIS PART CONFORMS TO CLASS B REQUIREMENTS OF COSMETIC SPEC PS-45499-002. 6. GUIDED PARTS TO BE SHIPPED WITH 2-32 TYPE AB SELF-TAPPING SCREW P/N 73726-0005. 7. FOR GROUNDED GUIDE MODULES USE DIA 2.45+/-0.10 (PTH), DIA 2.58 (DRILL), AND DIA 4.50 (PAD). 8. MAPS (MOLEX ADVANCED PLATING SYSTEM). DOCUMENT STATUS 12 FORMAT: master-tb-prod-C REVISION: J DATE: 2020/01/14 P1 RELEASE DATE 11 2022/02/18 10 B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION 8 SCALE mm NTS CURRENT REV DESC: REMASTERED TO NX GENERAL TOLERANCES (UNLESS SPECIFIED) ANGULAR TOL ± 4 PLACES ± 3 PLACES ± 2 PLACES ± 1 PLACE ± 0 PLACES ± 0.5 ° 0.13 0.25 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 05:04:24 9 DIMENSION UNITS 7 6 5 EC NO: 671119 DRWN: YOGEEB CHK'D: VINODM3 APPR: CWANG25 INITIAL REVISION: DRWN: BPISZCZOR APPR: JLAURX THIRD ANGLE PROJECTION 4 2021/06/17 2022/01/31 2022/02/18 I-TRAC DAUGHTERCARD 7 ROW GUIDE RIGHT SIGNAL MODULE PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2007/03/19 2007/03/19 DRAWING SERIES C-SIZE 76020 3 SD-76020-004 MATERIAL NUMBER PSD 001 CUSTOMER GENERAL MARKET SEE TABLE 2 C1 SHEET NUMBER 1 OF 2 1 A 12 11 10 9 7 8 6 5 4 3 2 1 H H MATERIAL NUMBER DIM. "B" DIM. "A" MAX. # OF COLUMNS G G 76020-***4 4 22.20 11.10 76020-***6 6 29.60 18.50 76020-***0 10 44.40 33.30 F F 76020-* * * * MODULE STYLE AND TAIL PLATING TYPE 4 = GUIDE RIGHT, MATTE TIN (FORMERLY TIN/LEAD) 5 = GUIDE RIGHT, MATTE TIN E # OF COLUMNS/PLATING 04 = 4 COL 30 GOLD 06 = 6 COL 30 GOLD 10 = 10 COL 30 GOLD 44 = 4 COL 10 GOLD (MAPS) 46 = 6 COL 10 GOLD (MAPS) 40 = 10 COL 10 GOLD MAPS) 54 = 4 COL W/ESD CLIP 30 GOLD 56 = 6 COL W/ESD CLIP 30 GOLD 50 = 10 COL W/ESD CLIP 30 GOLD 74 = 4 COL W/ESD CLIP 10 GOLD (MAPS) 76 = 6 COL W/ESD CLIP 10 GOLD (MAPS) 70 = 10 COL W/ESD CLIP 10 GOLD (MAPS) POLARIZATION KEY ORIENTATION 0 = NO KEY 1=A 2=B 3=C 4=D 5=E 6=F 7=G 8=H D E D C C B B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: REMASTERED TO NX GENERAL TOLERANCES (UNLESS SPECIFIED) A DOCUMENT STATUS 12 FORMAT: master-tb-prod-C REVISION: J DATE: 2020/01/14 P1 RELEASE DATE 11 2022/02/18 10 ANGULAR TOL ± 4 PLACES ± 3 PLACES ± 2 PLACES ± 1 PLACE ± 0 PLACES ± 0.5 ° 0.13 0.25 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 05:04:24 9 8 7 6 5 EC NO: 671119 DRWN: YOGEEB CHK'D: VINODM3 APPR: CWANG25 INITIAL REVISION: DRWN: BPISZCZOR APPR: JLAURX THIRD ANGLE PROJECTION 4 2021/06/17 2022/01/31 2022/02/18 I-TRAC DAUGHTERCARD 7 ROW GUIDE RIGHT SIGNAL MODULE PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2007/03/19 2007/03/19 DRAWING SERIES C-SIZE 76020 3 SD-76020-004 MATERIAL NUMBER PSD 001 CUSTOMER GENERAL MARKET SEE TABLE 2 C1 SHEET NUMBER 2 OF 2 1 A