A1209D-1W

A_D-1W & B_LD-1W Series 1W, FIXED INPUT, ISOLATED & UNREGULATED DUAL/SINGLE OUTPUT DC-DC CONVERTER FEATURES High Efficiency up to 80% 1KVDC Isolation DIP Package Internal SMD Construction Temperature Range: -40°C ~ +85°C No Heat sink Required No External Component Required Industry Standard Pinout RoHS Compliance RoHS S PRODUCT PROGRAM I nput P art Number B0303LD-1W B0305LD-1W A0505D-1W A0509D-1W A0512D-1W A0515D-1W B0505LD-W5 B0505LD-1W B0509 LD-1W B0512 LD-1W B0515 LD-1W A1205D-1W A1209D-1W A1212D-1W A1215D-1W B1203 LD-1W B1205 LD-1W B1209 LD-1W B1212 LD-1W B1215 LD-1W A1505D-1W B1515LD-1W A2405D-1W A2409D-1W A2412D-1W A2415D-1W B2405 LD-1W B2409 LD-1W B2412 LD-1W B2415 LD-1W B2424LD-1W Voltage (VDC) Nominal 3.3 Range 3.0-3.6 Voltage (VDC) 3.3 5 ±5 ±9 ±12 ±15 5 5 9 12 15 ±5 ±9 ±12 ±15 3.3 5 9 12 15 ±5 15 ±5 ±9 ±12 ±15 5 9 12 15 24 Output Current (mA) Max 303 200 ±100 ±56 ±42 ±33 100 200 111 83 67 ±100 ±56 ±42 ±33 303 200 111 83 67 ±100 67 ±100 ±56 ±42 ±33 200 111 83 67 42 Min 31 20 ±10 ±6 ±5 ±4 10 20 12 9 7 ±10 ±6 ±5 ±4 31 20 12 9 7 ±10 7 ±10 ±6 ±5 ±4 20 12 9 7 4 72 74 72 77 79 80 68 70 78 78 80 72 78 79 78 73 71 76 78 79 72 75 73 79 80 80 73 78 78 79 78 Efficiency Certificate (%, Typ) UL UL UL UL UL CE UL CE UL CE UL CE UL UL UL UL UL CE UL CE UL CE UL CE 5 4.5-5.5 APPLICATIONS The A_D-1W & B_LD-1W Series are specially designed for applications where a group of polar power supplies are isolated from the input power supply in a distribut ed power supply system on a circuit board. These products apply to: 1) W here the voltage of the input power supply is fixed (voltage variation ≤ ±10%); 2) W here isolation is necessary between input and output (isolation voltage ≤1000VDC); 3) Where the regulation of the output voltage and the output ripple noise are not demanding. Such as: purely digital circuits, ordinary low frequency analog circuits, and IGBT power device driving circuits. 12 10.8-13.2 15 13.5-16.5 24 21.6-26.4 MODEL SELECTION A0505D-1W Rated Power Package Style Output Voltage Input Voltage Product Series UL UL UL UL UL CE UL CE UL CE UL CE Note: The A_D-W 25/B_LD-W25 series also are available in our company. COMMON SPECIFICATIONS I tem Operating Temp. Storage Temp. Range Storage humidity Cooling Temp. rise at full load Lead temperature I solation voltage I solation resistance Short circuit protection* Case material MTBF W eight Test conditions Max Units 85 °C 125 95 % Free air convection 15 25 °C 300 1000 VDC 1000 MΩ 1 s Plastic (UL94-V0) 3500 K hours 2.1 G Min -40 -55 Typ MORNSUN Science& Technology co.,Ltd. Address: 2th floor 6th building, Huangzhou Industrial District, Guangzhou, China Tel: 86-20-38601850 Fax: 86-20-38601272 http://www.mornsun-power.com 1.5mm from case for 10 seconds Tested for 1 minute and 1 mA max Test at 500VDC *supply voltage must be discontinued at the end of short circuit duration. MORNSUN reserves the copyright Specifications subject to change without notice. A_D-1W & B_LD-1W A/2-2008 Page 1 of 2 OUTPUT SPECIFICATIONS Item Output power Line regulation Test conditions For Vin change of 1% (3.3V output) (Other output) (3.3V output) (5V output) (9V output) (12V output) (15V output) Min 0.1 Max Units 1 W ±1.5 ±1.2 12 20 % 10.5 15 8.3 15 6.8 15 6.3 15 See tolerance envelope graph 0.03 %/°C 50 75 mVp-p 75 100 100 150 100 KHz Typ Overload Protection Under output protection normal circuit of against operating these overload. conditions, has The the no products simplest m ethod is to connect a self-recovery fuse in series at the input end or add a circuit breaker t o the circuit. Recommended circuit I f you want to further Load regulation 10% to 100% load decrease the Output voltage accuracy Temperature drift 100% full load (AXXXXD-1W) Ripple & Noise* (BXXXXD-1W) (A/BXX24D-1W) Switching frequency Full load, nominal input 20MHz Bandwidth input/output ripple, an “LC” filtering network may b e connected to the input and output ends of the DC/DC converter, see (Figure 1). Dual Output L L Vin Cin +Vo Cout *Test ripple and noise by “ parallel cable” method. See detailed operation instructions at Testing of Power Converter section, application notes. Note: 1.All specifications measured at TA=25° C, humidity