A2405S-1W

A_S-1W & B_LS-1W Series 1W, FIXED INPUT, ISOLATED & UNREGULATED DUAL/SINGLE OUTPUT DC-DC CONVERTER RoHS FEATURES High Efficiency up to 80% 1KVDC Isolation SIP Package Internal SMD Construction Temperature Range: -40°C to +85°C No Heat sink Required No External Component Required Industry Standard Pinout RoHS Compliance PRODUCT PROGRAM Input Part Number B0303LS-1W B0305LS-1W A0505S-1W A0509S-1W A0512S-1W A0515S-1W B0505LS-W5 B0505LS-1W B0509 LS-1W B0512 LS-1W B0515 LS-1W A1205S-1W A1209S-1W A1212S-1W A1215S-1W B1203 LS-1W B1205 LS-1W B1209 LS-1W B1212 LS-1W B1215 LS-1W A1505S-1W B1515LS-1W A2405S-1W A2409S-1W A2412S-1W A2415S-1W B2405 LS-1W B2409 LS-1W B2412 LS-1W B2415 LS-1W B2424LS-1W Voltage (VDC) Nominal 3.3 Range 3.0-3.6 Voltage (VDC) 3.3 5 ±5 ±9 ±12 ±15 5 5 9 12 15 ±5 ±9 ±12 ±15 3.3 5 9 12 15 ±5 15 ±5 ±9 ±12 ±15 5 9 12 15 24 Output Current (mA) Max 303 200 ±100 ±56 ±42 ±33 100 200 111 83 67 ±100 ±56 ±42 ±33 303 200 111 83 67 ±100 67 ±100 ±56 ±42 ±33 200 111 83 67 42 Min 31 20 ±10 ±6 ±5 ±4 10 20 12 9 7 ±10 ±6 ±5 ±4 31 20 12 9 7 ±10 7 ±10 ±6 ±5 ±4 20 12 9 7 4 72 74 72 77 79 80 68 70 78 78 80 72 78 79 78 73 71 76 78 79 72 75 73 79 80 80 73 78 78 79 78 Efficiency (%, Typ) Certificate UL UL UL UL UL CE UL CE UL CE UL CE UL UL UL UL UL CE UL CE UL CE UL CE 5 4.5-5.5 APPLICATIONS The A_S-1W & B_LS-1W Series are specially designed for applications where a group of polar power supplies are isolated from the input power supply in a distributed power supply system on a circuit board. These products apply to: 1) W here the voltage of the input power supply is fixed (voltage variation ≤ ±10%); 2) W here isolation is necessary between input and output (isolation voltage ≤1000VDC); 3) W here the regulation of the output voltage and the output ripple noise are not demanding. Such as: purely digital circuits, ordinary low frequency analog circuits, and IGBT power device driving circuits. 12 10.8-13.2 15 13.5-16.5 24 21.6-26.4 UL UL UL UL UL CE UL CE UL CE UL CE MODEL SELECTION A0505S-1W P acka ge S tyl e O u tp ut Vo lta g e Inpu t Volta ge P rod uct S erie s Note: The A_S-W2/B_LS-W2 series also are available in our company. COMMON SPECIFICATIONS Item Operating Temp. Range Storage Temp. Range Storage humidity range Cooling Temp. rise at full load Lead temperature Isolation voltage Isolation resistance Short circuit protection* Case material MTBF W eight Test conditions Max Units 85 °C 125 95 % Free air convection 15 25 °C 300 1000 VDC 1000 MΩ 1 s Plastic (UL94-V0) 3500 K hours 2.1 G Min -40 -55 Typ MORNSUN Science& Technology co.,Ltd. Address: 2th floor 6th building, Hangzhou Industrial District, Guangzhou, China Tel: 86-20-38601850 Fax: 86-20-38601272 http://www.mornsun-power.com 1.5mm from case for 10 seconds Tested for 1 minute and 1 mA max Test at 500VDC *Supply voltage must be discontinued at the end of short circuit duration. MORNSUN reserves the copyright Specifications subject to change without notice. A_S-1W & B_LS-1W A/1-2007 Page 1 of 2 OUTPUT SPECIFICATIONS Item Output power Line regulation Test conditions For Vin change of 1% (3.3 output) (5V output) (9V output) (12V output) (15V output) Min 0.1 Max Units 1 W ±1.2 12 20 10.5 15 % 8.3 15 6.8 15 6.3 15 See tolerance envelope graph 0.03 %/°C 50 75 75 100 mVp-p 100 150 100 150 100 KHz Typ Overload Protection Under normal operating conditions, the output circuit of these products has no protection against overload. The simplest method is to connect a self-recovery fuse in series at the input end or add a circuit breaker to the circuit. Recommended circuit If you want to further decrease the input/output ripple, an “LC” filtering network may be connected to the input and output ends of the DC/DC converter, see (Figure 1). Dual Output L L Load regulation 10% to 100% load Output voltage accuracy Temperature drift 100% full load (AXXXXS-1W) (BXXXXLS-1W) 20MHz Ripple & Noise Bandwidth (AXX24LS-1W) (BXX24LS-1W) Switching frequency Full load, nominal input Vin Cin +Vo Cout DC DC GND Single Output L L Cout 0V -Vo Note: 1. All specifications measured at TA=25° C, humidity