B_(X)T-1W Series
1W,FIXED INPUT, ISOLATED & UNREGULATED SINGLE OUTPUT, SMD DC-DC CONVERTER
FEATURES
SMD Package Style Industry Standard Pinout No Heat sink Required 1KVDC Isolation High Power Density Internal SMD construction Temperature Range: -40°C to +85°C No External Component Required RoHS Compliance
m ulti-country patent protection RoHS
PRODUCT PROGRAM
Input Part Number B0303(X)T-1W B0305(X)T-1W B0503(X)T-1W B0505(X)T-1W B0509(X)T-1W B0512(X)T-1W B0515(X)T-1W B1205(X)T-1W B1209(X)T-1W 5 4.5-5.5 Voltage (VDC) Nominal 3.3 R ange 3.0-3.6 Voltage (VDC) 3.3 5 3.3 5 9 12 15 5 12 10.8-13.2 9 12 15 3.3 5 24 21.6-26.4 9 12 15 24 Output Current (mA) Max 303 200 303 200 111 84 67 200 111 84 67 300 200 110 83 67 42 Min 30 20 30 20 12 9 7 20 12 9 7 30 20 11 8 7 4 73 74 72 77 76 79 78 69 73 73 74 69 70 72 75 76 77 UL UL Efficiency (%, Typ.) UL CE
UL,CE UL,CE UL,CE UL,CE UL,CE UL,CE UL,CE UL,CE
APPLICATIONS
The B_(X)T-1W Series are specially designed for applications where a group of polar power supplies are isolated from the input power supply in a distributed power supply system on a circuit board. These products apply to: 1) W here the voltage of the input power supply is fixed (voltage variation ≤ ±10%); 2) W here isolation is necessary between input and output (isolation voltage ≤1000VDC); 3) Where the regulation of the output voltage and the output ripple noise are not demanding. Such as: purely digital circuits, ordinary low frequency analog circuits, and IGBT power device driving circuits.
B1212(X)T-1W B1215(X)T-1W B2403(X)T-1W B2405(X)T-1W B2409(X)T-1W B2412(X)T-1W B2415(X)T-1W B2424(X)T-1W
Note: 1.the B_XT-1W series have no 3,6,7 pin. For example B0505XT-1W. 2. B_XT-1W series : UL-60950-1 pending.
ISOLATION SPECIFICATIONS
Item Isolation voltage Isolation resistance Test Conditions Tested for 1 minute and 1mA max Test at 500VDC Min 1000 1000 Typ. Max Units VDC MΩ
OUTPUT SPECIFICATIONS
Item Output power Line regulation For Vin change of 1%(3.3V output) For Vin change of 1%(Others output) 10% to 100% load (3.3V output) 10% to 100% load (5V output) Load regulation 10% to 100% load (9V output) 10% to 100% load (12V output) 10% to 100% load (15V output) 10% to 100% load (24V output) Output voltage accuracy Temperature drift 100% full load 20MHz Bandwidth Full load, nominal input(5/12V) Full load, nominal input(24V) 50 100 500 Output ripple &Noise* Switching frequency See tolerance envelope graph 0.03 100 %/°C mVp-p KHz 15 12.8 8.3 6.8 6.3 5 Test Conditions Min 0.1 Typ. Max 1 ±1.5 ±1.2 20 15 10 10 10 10 % Units W
MODEL SELECTION
B0505(X)T-1W
Ra ted Power Pac ka ge Style Ou t put Voltage Inp ut Voltage Pro duct Series
MORNSUN Science& Technology co.,Ltd.
Address: 2th floor 6th building, Huangzhou Industrial District, Guangzhou, China Tel: 86-20-38601850 Fax:86-20-38601272 Http://www.mornsun-power.com
*Test ripple and noise by “parallel cable” method. See detailed operation instructions at Testing of Power Converter section, application notes.
Note:
1. All specifications measured at TA=25°C, humidity22 0 oC ) 26 0 C
10 Sec Max
o
22 0o C
-
It ’s not recommend to connect any external capacitor in the application field with less than 0.5 watt output.
OUTLINE DIMENSIONS & FOOTPRINT DETAILS
4. 13 ( 0.16 3)
First Angle Projection
Output Voltage Regulation and Over-voltage Protection Circuit The simplest device for output voltage r egulation, over-voltage and over-current protection is a linear voltage regulator with overheat protection that is connected to the input or output end in series (Figure2).
6 .25 ( 0 .2 4 6 ) 6.00 (0 . 2 3 6 )
(Side view) 2.54 0.25 (0.100) (0.100)
RECOMMENDED FOOTPRINT
Top v iew,grid:2.54*2.54mm(0.1*0.1inch)
B_T-1W
8765
B_(X)T-1W
8 12 5 4
12.70 (0.500) 7.62 (0.300) 11 . 2 M A X ( 0. 4 4 1 ) 7. 5 0 ( 0. 2 9 5 )
Vin GND
REG
+Vout
2.00 (0.079)
1234
DC DC
0V
REG
(Top view)
(0.039)
Vin GND
+Vout
DC DC
0V
2.54±0.1 (0.100±0.004) 6.76 (0.266)
0.60±0.05 (0.024±0.002)
F OOTPRINT DETAILS Pin Function(T) Function(XT) GND GND 1 Vin Vin 2 0V 4 0V +Vo +Vo 5 No Pin 3,6,7 NC NC NC 8 NC:No Connection Note: Unit:mm(inch) Pin section:0.60*0.25mm(0.024*0.010inch) Pin tolerances: +0.10mm( +0.004inch) General tolerances: +0.15mm( +0.006inch)
(Figure2) Overload Protection Under normal operating conditions, the output circuit of these products has no protection against over-current and short-circuits. The simplest method is to connect a self-recovery fuse in series
A 1.85MAX (0.073) 7.19 (0.283) 0.30 (0.012)
0.50 (0.020)
at the input end or add a circuit breaker to the circuit. No parallel connection or plug and play.
B_(X)T-1W A/2-2008 Page 2 of 2
1.35MAX (0.053)
5.00 。
MORNSUN reserves the copyright
Specifications subject to change without notice.
很抱歉,暂时无法提供与“B0503XT-1W”相匹配的价格&库存,您可以联系我们找货
免费人工找货