B2412XT-1W

B_(X)T-1W Series 1W,FIXED INPUT, ISOLATED & UNREGULATED SINGLE OUTPUT, SMD DC-DC CONVERTER FEATURES SMD Package Style Industry Standard Pinout No Heat sink Required 1KVDC Isolation High Power Density Internal SMD construction Temperature Range: -40°C to +85°C No External Component Required RoHS Compliance m ulti-country patent protection RoHS PRODUCT PROGRAM Input Part Number B0303(X)T-1W B0305(X)T-1W B0503(X)T-1W B0505(X)T-1W B0509(X)T-1W B0512(X)T-1W B0515(X)T-1W B1205(X)T-1W B1209(X)T-1W 5 4.5-5.5 Voltage (VDC) Nominal 3.3 R ange 3.0-3.6 Voltage (VDC) 3.3 5 3.3 5 9 12 15 5 12 10.8-13.2 9 12 15 3.3 5 24 21.6-26.4 9 12 15 24 Output Current (mA) Max 303 200 303 200 111 84 67 200 111 84 67 300 200 110 83 67 42 Min 30 20 30 20 12 9 7 20 12 9 7 30 20 11 8 7 4 73 74 72 77 76 79 78 69 73 73 74 69 70 72 75 76 77 UL UL Efficiency (%, Typ.) UL CE UL，CE UL，CE UL，CE UL，CE UL，CE UL，CE UL，CE UL，CE APPLICATIONS The B_(X)T-1W Series are specially designed for applications where a group of polar power supplies are isolated from the input power supply in a distributed power supply system on a circuit board. These products apply to: 1) W here the voltage of the input power supply is fixed (voltage variation ≤ ±10%); 2) W here isolation is necessary between input and output (isolation voltage ≤1000VDC); 3) Where the regulation of the output voltage and the output ripple noise are not demanding. Such as: purely digital circuits, ordinary low frequency analog circuits, and IGBT power device driving circuits. B1212(X)T-1W B1215(X)T-1W B2403(X)T-1W B2405(X)T-1W B2409(X)T-1W B2412(X)T-1W B2415(X)T-1W B2424(X)T-1W Note: 1.the B_XT-1W series have no 3,6,7 pin. For example B0505XT-1W. 2. B_XT-1W series : UL-60950-1 pending. ISOLATION SPECIFICATIONS Item Isolation voltage Isolation resistance Test Conditions Tested for 1 minute and 1mA max Test at 500VDC Min 1000 1000 Typ. Max Units VDC MΩ OUTPUT SPECIFICATIONS Item Output power Line regulation For Vin change of 1%(3.3V output) For Vin change of 1%(Others output) 10% to 100% load (3.3V output) 10% to 100% load (5V output) Load regulation 10% to 100% load (9V output) 10% to 100% load (12V output) 10% to 100% load (15V output) 10% to 100% load (24V output) Output voltage accuracy Temperature drift 100% full load 20MHz Bandwidth Full load, nominal input(5/12V) Full load, nominal input(24V) 50 100 500 Output ripple &Noise* Switching frequency See tolerance envelope graph 0.03 100 %/°C mVp-p KHz 15 12.8 8.3 6.8 6.3 5 Test Conditions Min 0.1 Typ. Max 1 ±1.5 ±1.2 20 15 10 10 10 10 % Units W MODEL SELECTION B0505(X)T-1W Ra ted Power Pac ka ge Style Ou t put Voltage Inp ut Voltage Pro duct Series MORNSUN Science& Technology co.,Ltd. Address: 2th floor 6th building, Huangzhou Industrial District, Guangzhou, China Tel: 86-20-38601850 Fax:86-20-38601272 Http://www.mornsun-power.com *Test ripple and noise by “parallel cable” method. See detailed operation instructions at Testing of Power Converter section, application notes. Note: 1. All specifications measured at TA=25°C, humidity22 0 oC ) 26 0 C 10 Sec Max o 22 0o C - It ’s not recommend to connect any external capacitor in the application field with less than 0.5 watt output. OUTLINE DIMENSIONS & FOOTPRINT DETAILS 4. 13 ( 0.16 3) First Angle Projection Output Voltage Regulation and Over-voltage Protection Circuit The simplest device for output voltage r egulation, over-voltage and over-current protection is a linear voltage regulator with overheat protection that is connected to the input or output end in series (Figure2). 6 .25 ( 0 .2 4 6 ) 6.00 (0 . 2 3 6 ) (Side view) 2.54 0.25 (0.100) (0.100) RECOMMENDED FOOTPRINT Top v iew,grid:2.54*2.54mm(0.1*0.1inch) B_T-1W 8765 B_(X)T-1W 8 12 5 4 12.70 (0.500) 7.62 (0.300) 11 . 2 M A X ( 0. 4 4 1 ) 7. 5 0 ( 0. 2 9 5 ) Vin GND REG +Vout 2.00 (0.079) 1234 DC DC 0V REG (Top view) (0.039) Vin GND +Vout DC DC 0V 2.54±0.1 (0.100±0.004) 6.76 (0.266) 0.60±0.05 (0.024±0.002) F OOTPRINT DETAILS Pin Function(T) Function(XT) GND GND 1 Vin Vin 2 0V 4 0V +Vo +Vo 5 No Pin 3,6,7 NC NC NC 8 NC:No Connection Note: Unit:mm(inch) Pin section:0.60*0.25mm(0.024*0.010inch) Pin tolerances: +0.10mm( +0.004inch) General tolerances: +0.15mm( +0.006inch) （Figure2） Overload Protection Under normal operating conditions, the output circuit of these products has no protection against over-current and short-circuits. The simplest method is to connect a self-recovery fuse in series A 1.85MAX (0.073) 7.19 (0.283) 0.30 (0.012) 0.50 (0.020) at the input end or add a circuit breaker to the circuit. No parallel connection or plug and play. B_(X)T-1W A/2-2008 Page 2 of 2 1.35MAX (0.053) 5.00 。 MORNSUN reserves the copyright Specifications subject to change without notice.