F0515T-W2

E_T-W2 & F_T-W2 Series 0.25W, FIXED INPUT, ISOLATED & UNREGULATED DUAL/SINGLE OUTPUT DC-DC CONVERTER UTRALMINIATURE SMD PACKAGE Multi-country patent protection RoHS PRODUCT PROGRAM FEATURES Single Voltage Output SMD Package Style Industry Standard Pinout No Heat sink Required 3KVDC Isolation High Power Density Internal SMD construction Temperature Range: -40°C~+85°C No External Component Required RoHS Compliance P art Number F0303T-W2 F0305T-W2 F0505T-W2 F0509T-W2 F0512T-W2 F0515T-W2 E0505T-W2 E0509T-W2 5 4.5-5.5 Nominal 3.3 Input Voltage (VDC) Range 3.0-3.6 Voltage (VDC) 3.3 5 5 9 12 15 ±5 ±9 ±12 ±15 5 9 12 12 10.8-13.2 15 ±5 ±9 ±12 ±15 Output Current (mA) Max 75 50 50 28 21 17 ±25 ±14 ±10.5 ±8.5 50 28 21 17 ±25 ±14 ±10.5 ±8.5 Min 8 5 5 3 2 2 ±3 ±2 ±1 ±1 5 3 2 2 ±3 ±2 ±1 ±1 60 60 64 65 67 66 64 65 67 66 65 64 63 64 65 64 63 64 Efficiency (%, Typ.) APPLICATIONS The E_T-W2&F_T-W2 Series are specially designed for applications where a group of polar power supplies are isolated from the input power supply in a distributed power supply system on a circuit board. These products apply to: 1) W here the voltage of the input power supply is fixed (voltage variation ≤ ±10%); 2) Where isolation is necessary between input and output (isolation voltage ≤3000VDC); 3) W here the regulation of the output voltage and the output ripple noise are not demanding. Such as: purely digital circuits, ordinary low frequency analog circuits, and IGBT power device driving circuits. E0512T-W2 E0515T-W2 F1205T-W2 F1209T-W2 F1212T-W2 F1215T-W2 E1205T-W2 E1209T-W2 E1212T-W2 E1215T-W2 OUTPUT SPECIFICATIONS Item Output power Line regulation F or Vin change of 1%(3.3V output) For Vin change of 1%(Others output) 3.3V output 15 12.8 8.3 6.8 6.3 Test Conditions Min Typ. M ax 0.25 ±1.5 ±1.2 20 15 10 10 10 %/° C mVp-p KHz % Units W MODEL SELECTION Load regulation 5V output 10% to 100% load 9V output 12V output 15V output Output voltage accuracy Temperature drift Output ripple &Noise* Switching frequency 100% full load 20MHz Bandwidth Full load, nominal input Rated Power Package S tyl e O utput Voltage Input Voltage P roduct S eries S ee tolerance envelope graph 0.03 50 100 75 MORNSUN Science& Technology co.,Ltd. Address: 2th floor 6th building, Huangzhou Industrial District, Guangzhou, China Tel: 86-20-38601850 Fax:86-20-38601272 Http://www.mornsun-power.com *Test ripple and noise by “parallel cable” method. See detailed operation instructions at Testing of Power Converter section, application notes. Note: 1. All specifications measured at TA=25°C, humidity220 oC ) 2 6 0o C 1 0 S ec Max external capacitor in the application field. Output Voltage Regulation and Over- voltage Protection Circuit The simplest device for output voltage regulation, over-voltage and over-current 2 2 0o C protection is a linear voltage regulator with overheat protection that is connected to the input or output end in series (Figure2). Dual O u tput Vn i GND R EG REG OUTLINE DIMENSIONS & FOOTPRINT DETAILS First Angle Projection +Vout 0V DC DC REG -Vout S ingle Output RECOMMENDED FOOTPRINT Top view,grid:2.54mm(0.1inch), diameter:1.00mm 2.00 (0.079) Vn i GND R EG REG +Vout DC DC 0V （Figure2） Overload Protection Under normal operating conditions, the output circuit of these products has no protection against overload. The simplest method is to (0.039) connect a self-recovery fuse in series at the input end or add a circuit breaker to the circuit. FOOTPRINT DETAILS Pin 2 1 Single Dual No parallel connection or plug and play. Vin GND 0V NC +Vo NC Vin GND 0V -Vo +Vo NC 8 Others Note: Unit:mm(inch) Pin section:0.50*0.30mm(0.020*0.012inch) Pin tolerances: 0.10mm( 0.004inch) General tolerances: 0.25mm( 0.010inch) MORNSUN reserves the copyright Specifications subject to change without notice. F_T-W2&E_T-W 2 A/0-2007 Page 2 of 2