F0515XT-1WR3-TR

DC/DC Converter F05_XT-1WR3 Series FEATURES 1W isolated DC-DC converter Fixed input voltage, unregulated single output  Continuous short-circuit protection  No-load input current as low as 5mA  Operating ambient temperature range: -40℃ to +105℃  High efficiency up to 85%  Compact SMD package  I/O isolation test voltage 3k VDC Patent Protection CB Report UL 62368-1 EN 62368-1 BS EN 62368-1 RoHS  Industry standard pin-out IEC 62368-1 F05_XT-1WR3 series are designed for use in distributed power supply systems and especially suitable in applications such as pure digital circuits, low frequency analog circuits, relay-driven circuits and data switching circuits. Selection Guide Input Voltage (VDC) Certification UL/EN/BS EN/IEC Part No. Output Full Load Capacitive Load Nominal Voltage Current(mA) (Range) (VDC) Max./Min. Efficiency (%) Min./Typ. F0503XT-1WR3 3.3 303/30 70/74 2400 F0505XT-1WR3 5 200/20 78/82 2400 9 111/12 79/83 1000 F0509XT-1WR3 5 (4.5-5.5) F0512XT-1WR3 (µF)Max. 12 84/9 79/83 560 F0515XT-1WR3 15 67/7 79/83 560 F0524XT-1WR3 24 42/4 81/85 220 Input Specifications Item Input Current (full load / no-load) Operating Conditions 5VDC input Min. Typ. Max. 3.3VDC/5VDC output -- 270/5 286/10 9VDC/12VDC output -- 241/12 254/20 15VDC/24VDC output -- 241/18 254/30 -- 15 -- mA -- 9 VDC Reflected Ripple Current* Surge Voltage (1sec. max.) 5VDC input -0.7 Input Filter Unit mA Capacitance filter Hot Plug Unavailable Note: * Please refer to DC-DC Converter Application Note for detailed description of reflected ripple current testing method. Output Specifications Item Operating Conditions Min. Voltage Accuracy Linear Regulation Load Regulation Ripple & Noise* Typ. Max. Unit See output regulation curve (Fig. 1) Input voltage change: ±1% 10%-100% load 20MHz bandwidth 3.3VDC output -- -- 1.5 Other outputs -- -- 1.2 3.3VDC output -- 15 20 5VDC output -- 10 15 9VDC output -- 8 10 12VDC output -- 7 10 15VDC output -- 6 10 24VDC output -- 5 10 Other outputs -- 30 75 24VDC output --- 50 100 2021.12.03-A/5 -- % mVp-p Page 1 of 5 MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation DC/DC Converter F05_XT-1WR3 Series Temperature Coefficient Full load -- Short-circuit Protection ±0.02 -- %/℃ Continuous, self-recovery Note:* The “parallel cable” method is used for Ripple and Noise test, please refer to DC-DC Converter Application Notes for specific information. General Specifications Item Operating Conditions Min. Typ. Max. Unit Isolation Input-output Electric strength test for 1 minute with a leakage current of 1mA max. 3000 -- -- VDC Insulation Resistance Input-output resistance at 500VDC 1000 -- -- MΩ Isolation Capacitance Input-output capacitance at 100kHz/0.1V -- 20 -- pF Operating Temperature For derating with temperature ≥100℃ see Fig. 2 -40 -- 105 Storage Temperature Case Temperature Rise Ta=25℃ Storage Humidity Non-condensing -55 -- 125 3.3VDC output -- 25 -- Other outputs -- 15 -- ℃ %RH --95 Peak temp.≤245℃, maximum duration time≤60s over 217℃ Reflow Soldering Temperature* Switching Frequency Full load, nominal input voltage MTBF MIL-HDBK-217F@25℃ Moisture Sensitivity Level (MSL) IPC/JEDEC J-STD-020D.1 -- 270 -- kHz 3500 -- -- k hours Level 1 Note: *For actual application, please refer to IPC/JEDEC J-STD-020D.1. Mechanical Specifications Case Material Black plastic; flame-retardant and heat-resistant (UL94 V-0) Dimensions 13.20 x 11.40 x 7.25 mm Weight 1.4g(Typ.) Cooling Method Free air convection Electromagnetic Compatibility (EMC) Emissions Immunity CE CISPR32/EN55032 CLASS B (see Fig. 4 for recommended circuit) RE CISPR32/EN55032 CLASS B (see Fig. 4 for recommended circuit) ESD IEC/EN61000-4-2 Air ±8kV, Contact ±4kV perf. Criteria B Typical Characteristic Curves 3.3VDC output Others Fig. 1 2021.12.03-A/5 Page 2 of 5 MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation DC/DC Converter F05_XT-1WR3 Series Fig. 2 Design Reference 1. Typical application Input and/or output ripple can be further reduced, by connecting a filter capacitor from the input and/or output terminals to ground as shown in Fig. 3. Choosing suitable filter capacitor values is very important for a smooth operation of the modules, particularly to avoid start-up problems caused by capacitor values that are too high. For recommended input and output capacitor values refer to Table 1. Table 1: Recommended input and output capacitor values Vin Cin Vo Cout +Vo Vin C in DC DC GND C out 5VDC 0V Fig. 3 4.7µF/16V 3.3/5VDC 10µF/16V 9VDC 4.7µF/16V 12VDC 2.2µF/25V 15VDC 1µF/25V 24VDC 0.47µF/50V 2. EMC (CLASS B) compliance circuit Fig. 4 2021.12.03-A/5 Page 3 of 5 MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation DC/DC Converter F05_XT-1WR3 Series Table 2: Recommended EMC filter values Output voltage C1/C2 Input voltage 5VDC Emissions CY 3.3/5/9VDC 4.7µF /25V 4.7µF /25V -- 1nF /4kVDC VISHAY HGZ102MBP TDK CD45-E2GA102M-GKA C3 LDM 12/15/24VDC Refer to the Cout in table 1 6.8µH 6.8µH Note: In the case of actual use, the requirements for Emissions are high, it is subject to CY. 3. For additional information please refer to DC-DC converter application notes on www.mornsun-power.com Dimensions and Recommended Layout 2021.12.03-A/5 Page 4 of 5 MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation DC/DC Converter F05_XT-1WR3 Series Tape and Reel Info Notes: 1. 2. 3. 4. 5. 6. 7. 8. For additional information on Product Packaging please refer to www.mornsun-power.com. Tube Packaging bag number: 58210024, Roll Packaging bag number: 58200054; If the product is not operated within the required load range, the product performance cannot be guaranteed to comply with all parameters in the datasheet; The maximum capacitive load offered were tested at input voltage range and full load; Unless otherwise specified, parameters in this datasheet were measured under the conditions of Ta=25℃, humidity