FB2412S-1W

EA_S-1W & FB_S-1W Series 1W, FIXED INPUT, 5200V ISOLATED & UNREGULATED DUAL/SINGLE OUTPUT DC-DC CONVERTER m ulti-country patent protection RoHS FEATURES 5.2KVDC Isolation SIP Package Temperature Range: -40°C to +85°C No Heat Sink Required Internal SMD Construction Low Isolation Capacitance No External Component Required Industry Standard Pinout RoHS Compliance PRODUCT PROGRAM Part Number EA0505S-1W EA0509S-1W EA0512S-1W EA0515S-1W FB0505S-1W FB0509S-1W FB0512S-1W FB0515S-1W EA1205S-1W 5 4.5-5.5 I nput Voltage (VDC) Nominal Range Voltage (VDC) ±5 ±9 ±12 ±15 5 9 12 15 ±5 ±9 ±12 12 10.8-13.2 ±15 5 9 12 15 ±5 ±9 ±12 24 21.6-26.4 ±15 5 9 12 15 Output Current (mA) Max ±100 ±56 ±42 ±33 200 111 83 67 ±100 ±56 ±42 ±33 200 111 83 67 ±100 +56 ±42 ±33 200 111 83 67 Min ±10 ±6 ±5 ±4 20 12 9 7 ±10 ±6 ±5 ±4 20 12 9 7 ±10 ±6 ±5 ±4 20 12 9 7 70 71 72 74 70 71 72 74 70 72 74 75 70 72 74 75 72 74 76 78 72 74 76 78 Efficiency (%, Typ) APPLICATIONS The EA_S-1W & FB_S-1W Series are specially designed for applications where a group of polar power supplies are isolated from t he input power supply in a distributed power supply system on a circuit board. These products apply to: 1) W here the voltage of the input power supply is fixed (voltage variation ≤ ±10%); 2) W here isolation is necessary between input and output (isolation voltage ≤5200VDC); 3) W here the regulation of the output voltage and the output ripple noise are not demanding. Such as: purely digital circuits, ordinary low frequency analog circuits, and IGBT power device driving circuits. EA1209S-1W EA1212S-1W EA1215S-1W FB1205S-1W FB1209S-1W FB1212S-1W FB1215S-1W EA2405S-1W EA2409S-1W EA2412S-1W EA2415S-1W FB2405S-1W FB2409S-1W FB2412S-1W FB2415S-1W ISOLATION SPECIFICATIONS Item Isolation voltage Isolation resistance Test Conditions Tested for 1 minute and 1mA max Test at 1000VDC Min 5200 1000 10 Typ Max Units VDC MΩ pF MODEL SELECTION Isolation capacitance EA0505S-1W Rat ed Power Pa ck a g e St yle O u t p u t Vo lt a g e In p u t Volta g e Pro du c t S e rie s COMMON SPECIFICATIONS Item Storage humidity Operating temperature Storage temperature Lead temperature Temp. rise at full load Short circuit protection* 5V input voltage 12V/24V input voltage 1.5mm from case for 10 seconds 15 -40 -55 Test Conditions Min Typ Max 95 85 125 300 25 1 Continuous Free air convection Plastic(UL94-V0) 3500 4.2 K hours g Second °C Units % MORNSUN Science & Technology co., Ltd. Address: 2th floor 6th building, Hangzhou Industrial District, Guangzhou, China Tel: 86-20-38601850 Fax: 86-20-38601272 http://www.mornsun-power.com Cooling Case material MTBF W eight *supply voltage must be discontinued at the end of short circuit duration. MORNSUN reserves the copyright Specifications subject to change without notice. EA_S-1W & FB_S-1W A/1-2008 Page 1 of 2 OUTPUT SPECIFICATIONS Item Output power Line regulation Test conditions Min 0.1 M ax Units 1 W ±1.2 12.8 15 % 8.3 15 6.8 15 6.3 15 See tolerance envelope graph 0.03 %/°C 150 200 mVp-p 250 KHz 42 Typ Recommended testing and application circuit If you want to further decrease the input/output ripple, an “LC” filtering network may be connected to the input and output ends of the DC/DC converter, see (Figure 1). Dual Output L For Vin change of 1% 10% to 100% load(5V output) 10% to 100% load (9V output) Load regulation 10% to 100% load (12V output) 10% to 100% load (15V output) Output voltage accuracy Temperature drift 100% full load Ripple & Noise* 20MHz Bandwidth (5V input) Full load, Switching frequency nominal input (others input) L Vin Cin +Vo Cout DC DC GND Single Output L L Cout 0V -Vo L Vin Cin +Vo Cout *Test ripple and noise by “ parallel cable” method. See detailed operation instructions at Testing of Power Converter section, application notes. Note: 1. All specifications measured at TA=25° C, humidity