LI24-10B05

LI24 Series 24W, SINGLE OUTPUT DIN-RAIL POWER SUPPLIES LI24 is a series of DIN-Rail green power supplies with high efficiency and excellent price/performance ratio provided by MORNSUN. This series provide stability and high immunity against electrical disturbance for loads in industrial process controls, machine tools and other equipment exposed to a difficult industrial environment. Compact size, light weight, standard Din Rail installation(35mm) are other features of these power supplies, which saves a lot of space for your design. Build-in large capacitor provides for you enough hold-up time. PRODUCT FEATURES 1 Standard Din Rail installation 2 AC and DC all in one (input from the same terminal) 3 Universal input voltage:85VAC to 264VAC 4 Output voltage adjustable 5 Low ripple & noise 6 Input under voltage lockout 7 Overload and short-circuit protection 8 Efficiency: 85% typ 9 Heat dissipation: natural 10 Switching frequency: 60-100kHz 11 MTBF>200,000 hours 12 Meet product standards of industrial class 13 Redundancy Module 14 3-year product warranty MODEL LIST Model LI24-10B05 LI24-10B12 LI24-10B24 24W Output power Input voltage range 100 - 240VAC (85 - 264VAC) 50/60Hz Output voltage/current (Vo/Io) 5V/4000mA 12V/2000mA 24V/1000mA 50mV Ripple & noise Efficiency 75 85 87 Notes: 1. Ripple and Noise were measured by a method with twisted-pair wires; 2. Unless otherwise specified, all specifications above are measured at rated input voltage and rated output load, TA=25°C, humidity < 75%.; 3. All specifications stated in this datasheet are subject to the above listed models only. For specifications of non-standard models, please contact our technical support team directly. GENERAL SPECIFICATIONS Temperature operating: storage: power derating above 55°C: humidity Temperature coefficient Switching frequency Efficiency Isolation voltage MTBF EMI EMS --- Electrostatic discharge ESD --- RF field susceptibility --- Electrical fast transients/bursts on mainsline --- Surge Safety standards Safety approval Safety class Case protection Mounting -10°C to +70°C max -25°C to +85°C max 3.75% /°C 95% max 0.02%/ °C 60 - 100KHZ 85% typ. Input/Output 3000VAC FCC Part 15, level B 200,000h @ 25°C EN55022, level B IEC/EN 61000-4-2 4kV/8kV IEC/EN 61000-4-3 3V/m IEC/EN 61000-4-4 1kV IEC/EN 61000-4-5 level 3 1kV/2kV UL 60950, IEC 60950, EN 60950 UL 60950, IEC 60950, EN 60950 Class 1 IP 20 35mm DIN-Rail MORNSUN reserves the copyright For any design change and upgrade, we will not make any prior notification A/0-2007 Page 1 of 2 INPUT SPECIFICATIONS Input voltage range Input frequency Input current(full load) Inrush(