T1530D-S

ACTIVE SIGNAL AMPLIFIER Iin & Vout T15/16/25/26_D/S DESCRIPTION The series is a high integration, high efficiency polygonal - line active isolation amplifier module, with anterior circuit current signal input and posterior current signal output. These modules are embed with a high efficiency isolated micro-power source, which can provide a electrics-feed for signal input. In the two-wire three-wire and four-wire circuit applications, our products largely predigest customers’ design helpfully improve the using room ratio of PCB. Adopting electromagnetism isolation technology, it is available to keep high accuracy and natural extremely low temperature drift. The isolation voltage among the input, output, power supply and isolated power output can up to 2.5KVDC. PRODUCT PROGRAM P art Number T1530D/S T1533D/S T1630D/S T1650D/S Power Supply 24V 24V 24V 12V Input 4-20mA 4-20mA 4-20mA 4-20mA Output 0-10V 0-10V 0-5V 0-5V Isolation Channels Power Output NONE 24V NONE NONE 1 1 1 1 Note: We could also offer customer design for special input and output. ELECTRICAL CHARACTERISTICS P ower Supply P ower Supply Data P ower Dissipation P ower Protection I solation Power Output Data Output Voltage Output Current Input Signal Input Impedance Overload Output Data Output Signal Load Power Supply ±5% ≤2W Reverse protection (Nominal) ±10% ≤25mA See above Voltage Drop≤ 250mV(At input=20mA) ≤300mA See above ＞1K Ω（ At output=max） FEATURES ● Four-port isolation（ Among input, output, power supply and Isolation Power output） ● High accuracy (0.1% F.S.) ● High linearity (0.1% F.S.) ● I solation voltage(2500VDC/60S) ● High frequency response(15KHz) ● Extremely low temperature(35PPM/ ℃ ) ● I ndustry standard(Operating Temperature Range:-25°C to 71° C) ● High reliability(MTBF＞500,000 hours) I nput Data TRANSMISSION CHARACTERISTICS Offset Gain Error Temperature Drift 0.1%F.S. 0.1%F.S. 0.0035%F.S./℃ (-25℃ to +71 ℃ ) ISOLATION CHARACTERISTICS MODEL SELECTION Galvanic Isolation I solation Voltage I nsulation Resistance Pa ckage style Iso lation po w er o utpu t Pow e r supp ly Out put Inp ut Isolatio n Amp lifier Four-port isolation（Among input, output, power supply and Isolation Power output） 2.5KVDC (Tested for 1minute and 1mA max, humidity < 70%) 1000MΩ,500VDC (Among signal input ,signal output ,power supply and isolation power output) T XXXXD OTHER CHARACTERISTICS Ambient temperature P ackage W eight Operation temperature:-25℃ t o +71℃ Transport and Storage temperature:-50℃ t o +105℃ DIP24/SOIC24 About 10g No dusts, gases of fiercely vibration, impulsion or gases that may erode to the components surrounded MORNSUN Science & Technology co.,Ltd. Address: 2th floor 6th building, Huangzhou Industrial District, Guangzhou, China Tel: 86-20-38601850 Fax:86-20-38601272 Http://www.mornsun-power.com The Environment in use Note: 1. All specifications measured at TA=25° C, humidity