T5230B

Active Single channel Analog signal Isolation barrier (Vin & Iout) T51/52/61/62_B APPLICATIONS Analog signal isolating barrier, is a signal conditioner with electrical insulation between input and output, which can receive the standard or non-standard analog signal input from the scene, and transmit a standard output signal to the control room or DCS, to get three-port isolated among power supply, input and output. It is designed for translating signals of apparatus in hazardous area, isolating and transforming these signals into standard signals which can be accepted by industry computer, DCS, PLC, or user-specified special signals. It is widely used in the industrial measurement systems, medical electronic equipment, electrical equipment etc. We adopt high efficiency magnetism and electricity isolated technology to achieve signal isolation, with characteristics of high output accuracy, good linearity and low temperature drift. Isolation Power Output Data Input Data Power Supply Data PRODUCT PROGRAM P art Number T5230B T5130B T6135B T6230B T6233B T6235B P ower Supply 24V 24V 24V 24V 24V 24V I nput 0-10V 0-10V 0-5V 0-5V 0-5V 0-5V Output 0-20mA 4-20mA 4-20mA 0-20mA 0-20mA 0-20mA Isolation Channels Power Output NONE NONE 12V NONE 24V 12V 1 1 1 1 1 1 Note: We could also offer customer design for special input and output. ELECTRICAL CHARACTERISTICS Power Supply Power Dissipation Power Protection Output Voltage Output Current Input Signal Input Impedance Overload Output Data Output Signal Load (Nominal Power Supply)±5% ≤2W Reverse protection (Nominal)±10% ≤25mA See above ≥10M Ω ≤15V See above ≤500Ω（At Output =20mA） FEATURES ● Three port Isolation(input, output, power supply) ● High accuracy (0.1% F.S.) ● High linearity (0.1% F.S.) ● I solation voltage(2500VDC/60S) ● High frequency response(15KHz) ● Low temperature drift(35PPM/ ℃) ● I ndustry class(Operation temp.: -25℃ to +71℃ ) ● High reliability(MTBF＞500,000 hours) TRANSMISSION CHARACTERISTICS Offset Gain Error Temperature Drift 0.1%F.S. 0.1%F.S. 0.0035%F.S./ ℃ (-25℃ to +71℃) ISOLATION CHARACTERISTICS MODEL SELECTION Galvanic Isolation I solation Voltage I nsulation Resistance Package style Isolation power output Power supply Output Input Isolation amplifier Three port Isolation(input, output, power supply) 2.5KVDC (Tested for 1minute and 1mA max, humidity < 70%) 100M Ω， 500VDC(Among signal input ,signal output, power supply and isolation power output) T XXXXB OTHER CHARACTERISTICS Ambient temperature P ackage S afety Class Operation temperature:-25℃ t o +71℃ Transport and Storage temperature:-50℃ t o +105℃ 35mm DIN-rail package IP20(IEC60529 / EN60529) GB/T 18268(IEC61326-1) About 60g No dusts, gases of fiercely vibration, impulsion or gases that may erode to the components surrounded MORNSUN Science & Technology co.,Ltd. Address: 2th floor 6th building, Huangzhou Industrial District, Guangzhou, China Tel: 86-20-38601850 Fax:86-20-38601272 Http://www.mornsun-power.com EMC compliance W eight Application environment Note: 1. All specifications measured at TA=25°C, humidity