URB4803MP-12W

URB_MP-12W Series 12W, WIDE INPUT, ISOLATED & REGULATED SINGLE OUTPUT DC-DC CONVERTER m ulti-country patent protection FEATURES Efficiency up to 88% Wide (4:1) Input Range 12W Rated Power Output 1.5KVDC Input/Output Isolation Operating Temperature: -40°C to+85°C DIP24 Package Industry Standard Pinout Five-sided Metal Shielding Package Over Voltage Protection Output Short Circuit Protection Remote ON/OFF RoHS PRODUCT PROGRAM Part Number URB2403MP-12W URB2405MP-12W * URB2412MP-12W * URB2415MP-12W * URB4803MP-12W * URB4805MP-12W * URB4812MP-12W * URB4815MP-12W * 48 18-75 80 24 9-36 40 Output Efficiency Current (mA) Capacitance No-load Voltage (%, Typ) (Max,uF) Nominal Range Max** (typ, mA) (VDC) Max Min Voltage (VDC) 55 55 25 25 20 20 10 10 3.3 5 12 15 3.3 5 12 15 3500 2400 1000 800 3500 2400 1000 800 0 0 0 0 0 0 0 0 3000 2000 500 400 3000 2000 500 400 85 86 86 86 85 87 87 88 Input *Designing. **Input voltage can’t exceed this value, or will cause the permanent damage. APPLICATIONS The URB_MP-12W Series are particularly suited to data transfer equipments, battery operated equipments, tele-communication equipments, distributed power system, mix analog/digital system, remote control system, industrial robot system and other wide input voltage application fields. INPUT SPECIFICATIONS Item Start-up time Test Conditions Input voltage range refer to output load Nominal input(24V) Under Voltage protection Nominal input(48V) DC-DC Module ON DC-DC Module OFF DC-DC Module ON DC-DC Module OFF DC-DC Module ON DC-DC Module OFF 3 Min Typ 500 8.8 8.3 17 16.5 9 8.5 17.5 17 40 Or open circuit 0 1.2 VDC VDC VDC Max Units mS CTRL MODEL SELECTION URB2403MP-12W Rated P ower Package Style O utput Voltage Input Voltage Product Ser ies OUTPUT SPECIFICATIONS Item Output Power Ripple& Noise Switching Frequency Test Conditions 25° C environment temperature 20MHz Bandwidth From 10% to 100% load 350 400 ±1 ±0.2 ±0.5 0.02 4.3 6 13 16 Continuous, automatic recovery VDC Min Typ Max 12 85 450 ±3 ±0.5 ±1.5 %/ °C % Units W mV KHz Output Voltage Accuracy Input voltage range refer to output load Voltage regulation Load Regulation Temperature Drift(Vout) Input voltage from low to high Nominal input,10% to 100% load 25° C environment temperature 3.3 M ORNSUN Science & Technology co.,Ltd. Address: 2th floor 6th building, Huangzhou I ndustrial District, Guangzhou, China Tel: 86-20-38601850 Fax: 86-20-38601272 Http://www.mornsun-power.com Over voltage protection Output voltage (VDC) 5 12 15 Short circuit protection MORNSUN reserves the copyright Specifications subject to change without notice. URB_MP-12W A/0-2008 Page 1 of 2 COMMON SPECIFICATION Item Isolation voltage Test Conditions Input/Output Min Typ Max Units VDC Tested for 1 minute 1500 Input, Output and case and 1 mA max 1500 Input/Output Tested at Input, Output and case 500VDC 1000 1000 1100 95 With derating at 55°C,refer to Temperature Derating Graph -40 -55 95 1.5mm from case for 10 seconds MIL-HDBK-217F(25°C) 1000 18.5 Copper plating nickel(Five-sided shield) 85 125 105 300 K hours g °C pF EFFICIENCY CURVE ① Efficiency Vs Load URB2403MP-12W MΩ E fficiency VS Output load 90 80 70 60 50 40 30 20 10 0 0 1000 2000 3000 4000 Load(mA) Isolation resistance Isolation Capacitance Storage humidity Operating temperature Storage temperature Temp. rise at full load Lead temperature MTBF Weight Case material ② Efficiency Vs Input voltage URB2403MP-12W Efficiency(%) Note: 1. All specifications measured at TA=25°C, humidity