WRD122424MP-3W

WRD122424MP-3W

  • 厂商:

    MORNSUN(金升阳)

  • 封装:

  • 描述:

    WRD122424MP-3W - TWIN OUTPUT DIP DC-DC CONVERTER - MORNSUN Science& Technology Ltd.

  • 详情介绍
  • 数据手册
  • 价格&库存
WRD122424MP-3W 数据手册
WRD_(M)P-3W Series 3W, WIDE INPUT ISOLATED & REGULATED TWIN OUTPUT DIP DC-DC CONVERTER m ulti-country patent protection RoHS FEATURES Wide (2:1) Input Range Twin output Operating Temperature: -40°C to+85°C UL94-V0 Package No external component required Industry Standard Pin out Short Circuit Protection(automatic recovery) Five-sided metal shielding(WRD_MP) MTBF>1,000,000 hours No Heat Sink Required RoHS Compliance PRODUCT PROGRAM Input Part Number W RD050505(M)P-3W W RD050909(M)P-3W W RD051212(M)P-3W W RD051515(M)P-3W W RD052424(M)P-3W W RD120505(M)P-3W W RD120909(M)P-3W W RD121212(M)P-3W W RD121515(M)P-3W W RD122424(M)P-3W 12 9.0-18 22 20 5 4.5-9.0 11 40 Voltage (VDC) N ominal R ange Max* Output Efficiency N o-load Voltage Current(mA) (%, Typ) Current (VDC) Max Min (mA,Typ) 5 9 12 15 24 5 9 12 15 24 5 9 24 18-36 40 10 12 15 24 5 9 48 36-72 80 5 12 15 24 300 166 125 100 62 300 166 125 100 62 300 166 125 100 62 300 166 125 100 62 30 16 12 10 6 30 16 12 10 6 30 16 12 10 6 30 16 12 10 6 68 70 72 73 72 74 76 80 79 81 76 78 82 80 82 76 78 80 79 82 APPLICATIONS The WRD_(M) P-3W Series are specially designed for applications where a wide range input voltage power supplies are isolated from the input power supply in a distributed power supply system on a circuit board. These products apply to: 1) Where the voltage of the input power supply is wide range (voltage range ≤2:1); 2) Where isolation is necessary between (Isolation Voltage ≤ 1000VDC); 3) Where the regulation of the output voltage and the output ripple noise are demanded. W RD240505(M)P-3W W RD240909(M)P-3W W RD241212(M)P-3W W RD241515(M)P-3W W RD242424(M)P-3W W RD480505(M)P-3W W RD480909(M)P-3W W RD481212(M)P-3W W RD481515(M)P-3W W RD482424(M)P-3W * Input voltage can’t exceed this value, or will cause the permanent damage. Note: The load shouldn't be less than 10%, otherwise ripple will increase dramatically. Operation under 10% load will not damage the converter; However, they may not meet all specification listed. OUTPUT SPECIFICATIONS MODEL SELECTION WRD051212(M)P-3W Rated Power Package Style 2 nd Output Voltage 1 st Output Voltage Input Voltage Product Series Item Output power Test conditions Refer to below product program Min 0.3 Typ ±1 ±3 ±0.5 ±0.2 Max 3 ±3 ±5 ±1* ±0.5 ±0.03 Units W Main output voltage accuracy R efer to recommended circuit Vice-output voltage accuracy R efer to recommended circuit Load Regulation Line Regulation Temperature Drift(Vout) Ripple** From 10% to 100% load Input voltage from low to high Refer to recommended circuit 20MHz Bandwidth 20MHz Bandwidth 100% load, nominal Input voltage % %/℃ mVp-p KHz PF 20 75 300 100 50 150 M ORNSUN Science & Technology co.,Ltd. Address: 2th floor 6th building, Huangzhou Industrial District, Guangzhou, China Tel: 86-20-38601850 Fax:86-20-38601272 Http://www.mornsun-power.com N oise** Switching Frequency Isolation Capacitance **Test ripple and noise by “parallel cable” m ethod. See detailed operation instructions at Testing of Power Converter section, application notes. Note: 1. All specifications measured at TA=25°C, humidity
WRD122424MP-3W
### 物料型号 - WRD050505(M)P-3W - WRD050909(M)P-3W - WRD051212(M)P-3W - WRD051515(M)P-3W - WRD052424(M)P-3W - WRD120505(M)P-3W - WRD120909(M)P-3W - WRD121212(M)P-3W - WRD121515(M)P-3W - WRD122424(M)P-3W - WRD240505(M)P-3W - WRD240909(M)P-3W - WRD241212(M)P-3W - WRD241515(M)P-3W - WRD242424(M)P-3W - WRD480505(M)P-3W - WRD480909(M)P-3W - WRD481212(M)P-3W - WRD481515(M)P-3W - WRD482424(M)P-3W

### 器件简介 WRD_(M)P-3W系列是专为在电路板上分布式电源系统中隔离输入电源而设计的3W隔离稳压双输出DIP直流-直流转换器。

### 引脚分配 - GND: 接地 - 0V2: 2,3脚 - 0V1: 22,23脚 - +Vo2: 14,11脚 - +Vo1: 16脚 - Vin: 输入电压,10,15脚 - NC: 无连接

### 参数特性 - 宽输入范围(2:1) - 双输出 - 工作温度:-40°C至+85°C - 无需外部组件 - 短路保护(自动恢复) - 五面金属屏蔽(WRD_MP) - MTBF>100万小时 - 无需散热器 - 符合RoHS标准

### 功能详解 WRD_(M)P-3W系列适用于输入电源电压范围宽(电压范围≤2:1)、需要隔离(隔离电压≤1000VDC)以及要求输出电压和输出纹波噪声稳定的应用。

### 应用信息 适用于输入电源电压范围宽、需要隔离以及要求输出电压和输出纹波噪声稳定的应用。

### 封装信息 - 封装材料:P型为塑料(UL94-V0),MP型为钢制镀镍 - 隔离电压:1500VDC - 隔离电阻:1000 MΩ - 重量:15g
WRD122424MP-3W 价格&库存

很抱歉,暂时无法提供与“WRD122424MP-3W”相匹配的价格&库存,您可以联系我们找货

免费人工找货