MS6610BSGU

MOSA MS6610 16-bit current-output Digital-to-Analog Converter 16-Bits Stereo Audio DAC, Current output, Low Power Consumption, Low Voltage, FEATURES ‧ ‧ ‧ ‧ ‧ ‧ ‧ Operation range: 2.7V~6.5V. Low power consumption Low distortion. No zero crossing distortion. Wide dynamic range(16-bit resolution). Current output Space saving package SOP8. ‧ Fast setting time permits 2*, 4*, and 8* oversampling(serial input) or double speed operation at 4* oversampling . ‧ Output and bias current are proportional to supply voltage ‧ Internal timing and control circuits ‧ Internal bias current ensures maximum dynamic range APPLICATIONS ‧ DVD, Multimedia system. DESCRIPTION The MS6610 is a 16-bit current-output Digital-to-Analog Converter(DAC). The MS6610 is fabricated in a 0.8µm CMOS process and features extremely low power dissipation, small package size and ease of application. The accuracy of the matched coarse current sources, combined with the unique symmetrical decoding method, preclude zerocrossing distortion and ensures high quality audio reproduction. These unique features, combined with its exceptional performance, make the MS6610 ideally suited for use in digital audio equipment. MS6610 is pin and function compatible with the Philips, TDA1545. PINNING Symbol BCK WS DATA GND VDD IOL VREF IOR Pin 1 2 3 4 5 6 7 8 Description bit clock input word select input data input ground positive supply voltage left channel output reference voltage output right channel output BCK 1 WS 2 8 IOR 7 IREF MS6610 DATA 3 GND 4 6 IOL 5 VDD REV 4 1/7 www.mosanalog.com MOSA BLOCK DIAGRAM MS6610 16-bit current-output Digital-to-Analog Converter 1nF I BL 6 I OL + Vref C1 3.9K R1 V OUT left OP1 1nF C2 LEFT OUTPUT LATCH RIGHT OUTPUT LATCH I BR 8 LEFT BIT SWITCHES RIGHT BIT SWITCHES 3.9K I OR + R2 VOUT right OP2 11-BIT PASSIVE DIVIDER 32 (5-BIT) MATCHED CURRENT SOURCES 32 (5-BIT) MATCHED CURRENT SOURCE 11-BIT PASSIVE DIVIDER Vref Iref Iref I BL Iref I BR R4 33K R3 22K 5 C3 100nF 4 ground + C4 1uF VDD Vref 7 LEFT INPUT LATCH REFERENCE SOURCE BCK WS 1 2 Rref 11K CONTROL & TIMING RIGHT INPUT LATCH DATA 3 Fig.1 Block diagram. ORDERING INFORMATION Package 8-Pin SOP (lead free) 8-Pin SOP (lead free) RoHS Compliance Part number MS6610BSGTR MS6610BSGU Packaging Marking MS6610BSG MS6610BSG Transport Media 2.5k Units Tape and Reel 100 Units Tube LIMITING VALUES Symbol VDD Tsig TXTAL TAMB Ves Positive Supply Voltage Storage Temperature Range Maximum Crystal Temperature Operating Ambient Temperature Range Electrostatic Handling Parameter Min -55 -40 -2000 Max 6.5 +150 +150 +85 2000 Unit V ℃ ℃ ℃ V REV 4 2/7 www.mosanalog.com MOSA 5V ELECTRICAL CHARACTERISTICS (Ta=25℃, VDD=5V, f=1kHz, Cap=1uF; unless otherwise specified) SYM PARAMETER CONDITIONS MS6610 16-bit current-output Digital-to-Analog Converter MIN 2.7 7.4 - TYP 5 5.8 6.1 11.0 36 86 MAX 6.5 UNIT V mA mA K dB dB DC Characteristics VDD Positive Supply Voltage IQ Quiescent current I DD Operating Current Rref Reference Resistor (Fig.1) PSSR CS Power Ripple Rejection Ratio Channel Separation at code 0000H IO=IFS Cap=1uF, f=100Hz Vripple=-20dBV f=1kHz 14.6 AC Characteristics Res Resolution I FS Full Scale Output Current Ptot Total Power Dissipation I bias Bias Current (adjustable) THD+N S/N IFS = 0.2VDD at code 0000H 0.9 643 Total harmonic distortion plus f=1kHz noise Signal-to-Noise Ratio A-weighted 1.0 29 714 -67 0.0447 90 16 1.1 785 -62 0.0794 bits mA mW µA dB ﹪ dB REV 4 3/7 www.mosanalog.com MOSA TYPICAL PERFORMANCE CHARACTERISTICS (Ta=25℃, f=1kHz, sampling rate=4fs; unless otherwise specified ) MS6610 16-bit current-output Digital-to-Analog Converter Code=0000H Io=IFS SUPPLY VOLTAGE (V) SUPPLY VOLTAGE (V) CHANNEL SEPARATION (dB) OPERATION CURRENT (mA) QUIESCENT CURRENT (mA) SUPPLY VOLTAGE (V) Quiescent current vs. supply voltage Operation current vs. supply voltage Channel separation vs. supply voltage (THD+N)/S (dB) (THD+N)/S (dB) VDD=5V RF=3.9k VDD=5V RF=3.9k PSRR (dB) VDD=5V, CAP=1uF VRR=-20dBV FREQUENCY (Hz) SUPPLY VOLTAGE (V) FREQUENCY (Hz) (THD+N)/S vs. frequency (THD+N)/S vs. supply voltage PSRR vs. frequency SUPPLY VOLTAGE (V) OUTPUT CURRENT DIFF (uA) OUTPUT CURRENT (mA) SUPPLY VOLTAGE (V) Output current vs. supply voltage Output current diff vs. supply voltage REV 4 4/7 www.mosanalog.com MOSA TIMING AND DATA FORMAT MS6610 16-bit current-output Digital-to-Analog Converter The MS6610 accepts input serial data formats of 16-bit word length. Left and right data words are time multiplexed. The MSB(bit 1) must always be First. The format of data input is shown in Figs. 2 and 3. With a LOW level on the word select input(WS) input data is placed in the right input register and with HIGH level on the WS input data is placed in the left register. The data in the input registers are simultaneously latched in the output registers which control the bit switches. Internal bias currents IBL and IBR are each added to the full scale output current IFS in order to achieve the maximum dynamic range at the outputs of OP1 and OP2(Fig. 1). The reference output voltage Vref(Fig. 1) is 2/3 VDD. In this way the maximum dynamic range is achieved over the entire power supply range. WS tr tHB tf LEFT RIGHT tLB tHW tSW BCK tcr LSB MSB tSD tHD DATA Fig.2 Timing and input signals. WS LEFT RIGHT BCK DATA 2 1 0 15 MSB 14 13 2 1 0 LSB 15 MSB 14 13 2 1 0 LSB Fig.3 Right justified format DIGITAL INPUTS (WS, BCK, DATA) SYM VIL VIH f BCK BR FWS PARAMETER Input LOW TTL level Input HIGH TTL level Input Clock Frequency Bit Rate Data Input (Pin 3) Word Select Input (Pin 2) Rise Time Fall Time Bit Clock Cycle Time Bit Clock High Time Bit Clock Low Time Data Set-up Time Data Hold Time to Bit Clock Word Select Hold Time 54 15 15 12 2 2 CONDITIONS MS6323T MS6323T 2 MIN TYP 18.4 18.4 384 12 12 MAX 0.8 V V MHz Mbits/s kHz ns ns ns ns ns ns ns ns UNIT tr tf t Cr t HB t LB t SD t HD t HW REV 4 5/7 www.mosanalog.com MOSA APPLICATION INFORMATION VDD 10uF 0.1uF 1nF MS6610 16-bit current-output Digital-to-Analog Converter 3.9k 22k 100uF VOA 10k BCK 1 5 8 2 1 3 33k 7 5 7 DATA 3 4 6 6 4 VREF 100uF 8 WS 2 MS6610 MS2100 1uF 3.9k 100uF VOB 1nF 10k Fig.3 Example of application with MS6610 (audio DAC) REV 4 6/7 www.mosanalog.com MOSA EXTERNAL DIMENSIONS 4.8 MS6610 16-bit current-output Digital-to-Analog Converter 8 5 6.0 3.9 1 4 Unit : mm Tolerance : 0.1mm 1.27 0.42 0.68 1.4 0.22 1.27 0.42 0.23 TAPE AND REEL (Unit : mm) 2.0 0.30 0.05 4.0 1.75 0.3R MAX 5.5 0.05 12.0 0.3 5.4 0.05 1.5+0.1/-0.0 DIA 3.0 3.6 6.9 8.0 1.5 MIN 0.5 Radius Typical 2.0 1.7 REV 4 7/7 www.mosanalog.com