MS6853TGU

MOSA MS6853 Mono 1.9W / Stereo 300mW Power Amplifier Mono 1.9W / Stereo 300mW Power Amplifier Low Voltage Operation, Shutdown Function FEATURES ‧Operation range: 2.4V ~ 6.5V ‧Shutdown Current 18uA at 5V ‧Output power, THD+N=1% BTL, RL=3Ω, 2.1W at 5V BTL, RL=4Ω, 1.9W at 5V, 0.83W at 3.3V, 500mW at 2.7V BTL, RL=8Ω, 1.2W at 5V, 0.54W at 3.3V, 350mW at 2.7V SE, RL=8Ω, 300mW at 5V, 125mW at 3.3V, 85mW at 2.7V SE, RL=32Ω, 90mW at 5V, 43mW at 3.3V, 25mW at 2.7V ‧Headphone sense ‧Unity-gain stable, pop noise free ‧Space-saving MSOP10 (enhance thermal pad), TSSOP14 APPLICATIONS ‧Desktop computer’s sound card ‧Portable audio devices ‧PDA ‧Handheld games ‧Communication headsets ‧Cross-reference: SSM2250, LM4853, LM4858 DESCRIPTION The MS6853 is a low distortion power amplifier that can drive a set of 1.9W of continuous average power into a mono 4Ω bridged-tied load (BTL) or 2 * 90mW into stereo 32Ω single ended (SE) loads headphone. It can automatically switch between mono BTL and stereo SE modes utilizing a headphone sense pin. The BTL configuration eliminates the need for external coupling capacitors on the output in most applications. The unity gain stable MS6853’s gain is set by external gain-setting resistors. The MS6853 has good feature for portable equipment, these features include the low voltage operation, micropower consumption shutdown mode, enhance thermal pad and small package MSOP10, TSSOP14, make the MS6853 ideally suited for use in portable digital audio equipments. BLOCK DIAGRAM VDD L-IN + A1 L-OUT / BTL OUT- BYPASS + A2 VDD R-OUT Mono / Stereo Mode Switching Circuitry BTL OUT+ R-IN + A3 HP-IN VDD GND Click/Pop Reduction Bias SHUTDOWN REV 6 1/14 www.mosanalog.com MOSA PIN CONFIGURATION Symbol L-IN SHUTDOWN HP-IN GND R-IN R-OUT BY PASS BTL OUT+ VDD L-OUT/BTL OUTnc MSOP10 TSSOP14 Pin Pin 1 2 2 3 4 5 6 7 8 9 10 3 4 5 6 9 10 11 12 13 1,7,8,14 Left channel input MS6853 Mono 1.9W / Stereo 300mW Power Amplifier Description SHUTDOWN places the entire device in shutdown mode when held high. TTL compatible input. Headphone input detection. A logical low sets BTL mode, a logical high sets SE mode. Ground Right channel input Right channel output BYPASS is the cap to the voltage divider for internal mid-supply bias. This terminal should be connected to a 0.1-μF to 10-μF capacitor CBP. Bridged-tied load positive output Supply voltage Left channel output or bridged-tied load negative output No connected TSSOP14 MSOP10 nc L-IN SHUTDOWN HP-IN GND R-IN 1 2 3 4 5 MS6853 Thermal Pad 10 9 8 7 6 L-OUT / BTL OUTVDD BTL OUT + BYPASS R-OUT 1 2 3 4 5 6 7 MS6853 14 13 12 11 10 9 8 nc L-OUT / BTL OUTVDD BTL OUT + BYPASS R-OUT nc L-IN SHUTDOWN HP-IN GND R-IN nc ORDERING INFORMATION Package 10-Pin MSOP (lead free) 10-Pin MSOP (lead free) 14Pin TSSOP (lead free) 14Pin TSSOP (lead free) RoHS Compliance Part number MS6853MGTR MS6853MGU MS6853TGTR MS6853TGU Packaging Marking 6853G 6853G MS6853G MS6853G Transport Media 3.5k Units Tape and Reel 80 Units Tube 2.5Units Tape and Reel 98Units Tube REV 6 2/14 www.mosanalog.com MOSA ABSOLUTE MAXIMUM RATINGS Symbol VDD VESD TSTG TA TJ TS RTHJA Supply voltage Electrostatic handling Storage temperature range Operating ambient temperature range Maximum junction temperature Soldering temperature, 10 seconds Thermal resistance from junction to ambient in free air MSOP10 (enhance thermal pad) TSSOP14 Parameter MS6853 Mono 1.9W / Stereo 300mW Power Amplifier Rating 6.5 -3000 to 3000 -65 to 150 -40 to 85 150 260 50 150 Unit V V ℃ ℃ ℃ ℃ ℃/W OPERATING RATINGS Symbol VDD Supply voltage Parameter Min 2.4 Typ 5 Max 6.5 Unit V 5V ELECTRICAL CHARACTERISTICS Ta = 25°C, VDD=5V, f=1kHz, BW