MOSA
MS6863
Dual 2W Power Amplifiers with Stereo Headphone
Dual 2W Power Amplifiers / Stereo Headphone Low Voltage, Pop Noise Free Function
FEATURES
‧Operation range: 2.4V ~ 6.5V ‧Shutdown Current 0.4uA at 5V ‧Output power, THD+N=1% BTL, RL=3Ω, 2.3W at 5V BTL, RL=4Ω, 2W at 5V, 0.8W at 3.3V, 500mW at 2.7V BTL, RL=8Ω, 1.2W at 5V, 0.5W at 3.3V, 350mW at 2.7V SE, RL=8Ω, 300mW at 5V,130mW at 3.3V, 85mW at 2.7V SE, RL=32Ω, 90mW at 5V, 40mW at 3.3V, 25mW at 2.7V ‧Headphone sense ‧Unity-gain stable ‧pop noise free control (extra function for pin7) ‧Space-saving TSSOP20, enhance thermal pad
APPLICATIONS
‧Desktop computer’s sound card ‧Portable audio devices ‧Portable digital TV ‧MP3 peripheral ‧Handheld games ‧Cross-reference: LM4863
DESCRIPTION
The MS6863 is a low distortion power amplifier that can drive 2*2W of continuous average power into a dual 4Ω bridged-tied load (BTL) or 2 * 90mW into stereo 32Ω single ended (SE) loads headphone. It can automatically switch between dual BTL and stereo SE modes utilizing a headphone sense pin. The BTL configuration eliminates the need for external coupling capacitors on the output in most applications. The unity gain stable MS6863’s gain is set by external gain-setting resistors. The MS6863 has good feature for portable equipment, these features include the low voltage operation, micropower consumption shutdown mode, enhance thermal pad and small package TSSOP20, make the MS6863 ideally suited for use in portable audio equipments. The MS6863 has an extra selection for pin7 to achieve pop noise free in shutdown control.
BLOCK DIAGRAM
VDD -INA +INA + -OUT A
A1
BYPASS
+
A2
+OUT A
-INB +INB SD HP-IN
Power Manage
+
B1
-OUT B
+
B2
+OUT B
GND
REV 4 1/14 www.mosanalog.com
MOSA
PIN CONFIGURATION
Symbol SD +OUTA -OUTA -INA +INA +INB BYPASS -INB -OUTB +OUTB HP-IN VDD GND GND (SDPR) Pin 1 3 5 6 8 13 14 15 16 18 20 4, 17 2, 9, 10 11, 12, 19 7
MS6863
Dual 2W Power Amplifiers with Stereo Headphone
Description SHUTDOWN places the entire device in shutdown mode when held high. TTL compatible input. Bridged-tied load positive output A. Left channel output or bridged-tied load negative output A. Negative input A. Positive input A. Positive input B. BYPASS is a capacitor to the voltage divider for the internal mid-supply bias. This terminal should be connected to a 0.1-μF to 10-μF capacitor CB. Negative input B Right channel output or bridged-tied load negative output B. Bridged-tied load positive output B. Headphone input detection. A logical low sets BTL mode, a logical high sets SE mode. Supply voltage Ground Connected to ground, it is compatible for LM4863 SDPR: Shutdown Power Preparation. Pop noise free in shutdown control, please refer to application information
TSSOP20
SD GND +OUTA VDD -OUTA -INA GND(SDPR) +INA GND
1 2 3 4 5 6 7 8 9 Thermal Pad
20 19 18 17 16 15 14 13 12 11 MS6863
HP-IN GND +OUTB VDD -OUTB -INB BYPASS +INB GND GND
GND 10
REV 4
2/14
www.mosanalog.com
MOSA
ORDERING INFORMATION
Package 20Pin TSSOP (lead free) 20Pin TSSOP (lead free) RoHS Compliance Part number MS6863TGTR MS6863TGU MS6863G MS6863G
MS6863
Dual 2W Power Amplifiers with Stereo Headphone
Packaging Marking
Transport Media 2.5k Units Tape and Reel 75 Units Tube
ABSOLUTE MAXIMUM RATINGS
Symbol VDD VESD TSTG TA TJ TS RTHJA Supply voltage Electrostatic handling Storage temperature range Operating ambient temperature range Maximum junction temperature Soldering temperature, 10 seconds Thermal resistance from junction to ambient in free air TSSOP20 (enhance thermal pad) Parameter Rating 6.5 2000 -65 to 150 -40 to 85 150 260 51 Unit V V ℃ ℃ ℃ ℃ ℃/W
OPERATING RATINGS
Symbol VDD Supply voltage Parameter Min 2.4 Typ 5 Max 6.5 Unit V
REV 4
3/14
www.mosanalog.com
MOSA
5V ELECTRICAL CHARACTERISTICS
MS6863
Dual 2W Power Amplifiers with Stereo Headphone
Ta = 25°C, VDD=5V, f=1kHz, BW
很抱歉,暂时无法提供与“MS6863_1”相匹配的价格&库存,您可以联系我们找货
免费人工找货