0
登录后你可以
  • 下载海量资料
  • 学习在线课程
  • 观看技术视频
  • 写文章/发帖/加入社区
会员中心
创作中心
发布
  • 发文章

  • 发资料

  • 发帖

  • 提问

  • 发视频

创作活动
MS6890GTR

MS6890GTR

  • 厂商:

    MOSA

  • 封装:

  • 描述:

    MS6890GTR - Mono 1.1W Power Amplifier Low Voltage Operation - MOSA ELECTRONICS

  • 详情介绍
  • 数据手册
  • 价格&库存
MS6890GTR 数据手册
MOSA Mono 1.1W Power Amplifier Low Voltage Operation FEATURES •Operation range: 2.5V~5.5V •Shutdown Current 0.1uA at 5V •PSRR at 217Hz, 60dB at 5V •Output power, THD+N=1% RL=8 , 1.1W at 5V, 0.4W at 3.3V, 200mW at 2.5V •Unity-gain stable •Space-saving SOP8, MSOP8 and enhance thermal pad MS6890 Mono 1.1W Power Amplifier with Shutdown APPLICATIONS •Portable electronic devices •PDAs •Communication headsets •Cross-reference: LM4890, LM4893, TS4890 TPA751, MAX9716 DESCRIPTION The MS6890 is a low distortion power amplifier that can drive 1.1W of continuous average power into a mono 8 bridged-tied load (BTL). Operation with 2.5V supply, it can drive 200mw into a mono 8 . The BTL configuration eliminates the need for external coupling capacitors on the output in most applications. The MS6890 is unity-gain stable and can be configured by external gain-setting resistors. The MS6890 has good feature for portable equipment, these features include the low voltage operation, micropower consumption shutdown mode, enhance thermal pad and small package SOP8, MSOP8, make the MS6890 ideally suited for use in portable electronic equipments. BLOCK DIAGRAM -IN +IN 4 3 + A1 - 5 Vo1 BP SHDN VDD GND 2 1 6 7 + Bias control A2 + 8 Vo2 REV 1.0 1 www.mosanalog.com MOSA PIN CONFIGURATION Symbol /SHDN BP +IN -IN Vo1 VDD GND Vo2 Pin 1 2 3 4 5 6 7 8 MS6890 Mono 1.1W Power Amplifier with Shutdown Description /Shutdown places the entire device in shutdown mode when held low. TTL compatible input. Bypass is the cap to the voltage divider for internal mid-supply bias. This terminal should be connected to a 0.1-µF to 10-µF capacitor CBP. Non-inverting input Inverting input BTL negative output Supply voltage Ground BTL positive output SOP8, MSOP8 SHDN 1 BP 2 +IN 3 -IN 4 Thermal Pad 8 Vo2 7 GND 6 VDD 5 Vo1 ORDERING INFORMATION Package 8-Pin SOP (lead free) 8-Pin SOP (lead free) 8-Pin MSOP (lead free) 8-Pin MSOP (lead free) RoHS Compliance Part number MS6890GTR MS6890GU MS6890MGTR MS6890MGU Packaging Marking 6890G 6890G 6890G 6890G Transport Media 2.5k Units Tape and Reel 100 Units Tube 3.5k Units Tape and Reel 80 Units Tube ABSOLUTE MAXIMUM RATINGS Symbol VDD VESD TSTG TA TJ TS RTHJA Supply voltage Electrostatic handling Storage temperature range Operating ambient temperature range Maximum junction temperature Soldering temperature, 10 seconds Thermal resistance from junction to ambient in free air SOP8 (enhance thermal pad) MSOP8 (enhance thermal pad) 2 Parameter Rating 6 3500 -65 to 150 -40 to 85 150 260 50 50 Unit V V ℃ ℃ ℃ ℃ ℃/W REV 1.0 www.mosanalog.com MOSA OPERATING RATINGS Symbol VDD Supply voltage Parameter MS6890 Mono 1.1W Power Amplifier with Shutdown Min 2.5 Typ 5 Max 5.5 Unit V 5V ELECTRICAL CHARACTERISTICS Ta = 25°C, VDD=5V, f=1kHz, BW
MS6890GTR
1. 物料型号: - 型号:MS6890 - 描述:Mono 1.1W Power Amplifier with Shutdown(单声道1.1W功率放大器,带关闭功能)

2. 器件简介: - MS6890是一款低失真功率放大器,能够驱动1.1W的连续平均功率到单声道8欧姆桥接负载(BTL)。在2.5V供电下,它可以驱动单声道8欧姆200毫瓦的功率。BTL配置消除了大多数应用中外部耦合电容器的需求。MS6890是增益稳定的,并且可以通过外部增益设置电阻进行配置。

3. 引脚分配: - /SHDN(1):关闭功能,当引脚被拉低时,整个设备进入关闭模式,TTL兼容输入。 - BP(2):旁路是内部中供电压分压器的电容,应连接0.1-uF至10-uF的电容器Cpp。 - +IN(3):非反相输入。 - -IN(4):反相输入。 - Vol(5):BTL负输出。 - VpD(6):供电电压。 - GND(7):地。 - Vo2(8):BTL正输出。

4. 参数特性: - 工作电压范围:2.5V至5.5V。 - 关闭模式电流:0.1uA(在5V下)。 - 电源抑制比:在217Hz下60dB(在5V下)。 - 输出功率:在5V下,8欧姆负载下1.1W;在3.3V下,0.4W;在2.5V下,200mW。 - 增益稳定。

5. 功能详解: - MS6890具有低电压操作、微功耗关闭模式、增强型热垫和小尺寸SOP8、MSOP8封装等特点,非常适合便携式电子设备使用。

6. 应用信息: - 基本应用示例:图1展示了一个音频放大器应用电路。 - 外部增益设置:通过外部电阻配置增益。 - 高通滤波器:输入电容CIN和电阻RIN决定了高通滤波器的截止频率。 - 热垫考虑:热垫必须接地,MS6890的热设计需要特别注意。

7. 封装信息: - SOP8(带热垫)和MSOP8(带热垫)的详细尺寸图和参数。
MS6890GTR 价格&库存

很抱歉,暂时无法提供与“MS6890GTR”相匹配的价格&库存,您可以联系我们找货

免费人工找货