MS6901MGTR

MOSA MS6901 Mono 1.1W Power Amplifier with Shutdown Selection Mono 1.1W Power Amplifier Selectable Shutdown Logic Level Low Voltage Operation FEATURES ‧Operation range: 2.5V ~ 6.5V ‧Shutdown Current 0.1uA at 5V ‧PSRR at 217Hz, 60dB at 5V ‧Output power, THD+N=1% RL=8Ω, 1.1W at 5V, 0.4W at 3.3V, 200mW at 2.5V ‧Unity-gain stable ‧Space-saving MSOP10, enhance thermal pad APPLICATIONS ‧Portable electronic devices ‧PDAs ‧Communication headsets ‧Cross-reference: LM4901 DESCRIPTION The MS6901 is a low distortion power amplifier that can drive 1.1W of continuous average power into a mono 8Ω bridged-tied load (BTL). Operation with 2.5V supply, it can drive 200mw into a mono 8Ω. The shutdown may be enabled by either logic high or logic low that depending on shutdown mode selection. The BTL configuration eliminates the need for external coupling capacitors on the output in most applications. The MS6901 is unity-gain stable and can be configured by external gain-setting resistors. The MS6901 has good feature for portable equipment, these features include the low voltage operation, micropower consumption shutdown mode, enhance thermal pad and small package MSOP10, make the MS6901 ideally suited for use in portable electronic equipments. BLOCK DIAGRAM -IN +IN 5 4 + A1 - 6 Vo1 BP SD SD Mode VDD GND 2 1 3 8 7, 9 + Bias control A2 + 10 Vo2 - REV 1 1/9 www.mosanalog.com MOSA PIN CONFIGURATION Symbol Pin MS6901 Mono 1.1W Power Amplifier with Shutdown Selection Description Shutdown places the entire device in shutdown mode depending on SD Mode selection. TTL compatible input. SD Mode = 0, the device entries shutdown when SD is logic low. SD Mode = 1, the device entries shutdown when SD is logic high. Bypass is the cap to the voltage divider for internal mid-supply bias. This terminal should be connected to a 0.1-μF to 10-μF capacitor CBP. The shutdown mode controls the shutdown logic level of the SD pin1. TTL compatible input Non-inverting input Inverting input BTL negative output Ground Supply voltage Ground BTL positive output MSOP10 SD BP SD Mode +IN -IN 1 2 3 4 5 Thermal Pad 10 9 8 7 6 SD 1 BP SD Mode +IN -IN Vo1 GND VDD GND Vo2 2 3 4 5 6 7 8 9 10 Vo2 GND VDD GND Vo1 ORDERING INFORMATION Package 10-Pin MSOP (lead free) 10-Pin MSOP (lead free) RoHS Compliance Part number MS6901MGTR MS6901MGU Packaging Marking 6901G 6901G Transport Media 3.5k Units Tape and Reel 80 Units Tube ABSOLUTE MAXIMUM RATINGS Symbol VDD VESD TSTG TA TJ TS RTHJA Supply voltage Electrostatic handling Storage temperature range Operating ambient temperature range Maximum junction temperature Soldering temperature, 10 seconds Thermal resistance from junction to ambient in free air MSOP10 (enhance thermal pad) 2/9 Parameter Rating 6.5 3500 -65 to 150 -40 to 85 150 260 50 Unit V V ℃ ℃ ℃ ℃ ℃/W REV 1 www.mosanalog.com MOSA OPERATING RATINGS Symbol VDD Supply voltage Parameter MS6901 Mono 1.1W Power Amplifier with Shutdown Selection Min 2.5 Typ 5 Max 6.5 Unit V 5V ELECTRICAL CHARACTERISTICS Ta = 25°C, VDD=5V, f=1kHz, BW