FR101

MOSPEC FAST RECOVERY RECTIFIER VOLTAGE RANGE 50 to 1000 Volts CURRENT 1 Ampere FEATURES ＊Low cost construction ＊Low reverse leakage ＊Fast switching for high efficiency ＊High forward surge current Capability ＊High Temperature soldering guaranteed: 260oC/10 seconds, 0.375”(9.5 mm) lead length at lbs (2.3kg) tension. MECHANICAL DATA ＊Case：Transfer Molded Plastic ＊Epoxy: UL94V-O rate flame retardant ＊Terminals：Plated axial lead, Solderable Per MIL-STD-202 Method 208 ＊Polarity：Color band denotes cathode end ＊Mounting position: Any ＊Weight：0.012 ounce, 0.33 grams (approx) FR101 THRU FR107 DO-41 DIM A B C D MILLIMETERS MIN 2.00 25.40 4.20 0.70 MAX 2.70 --5.20 0.90 AXIMUM RATINGS AND ELECTRICAL CHARATERISTICS * Rating at 25℃ ambient temperature unless otherwise specified * Single phase,half wave. 60Hz, resistive or inductive load. * For capacitive load derate current by 20 % Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectifier Forward Current Per Leg TC=75℃ Non-Repetitive Peak Surge Current (Surge applied at rate load conditions halfware, single phase, 60Hz) Maximum Instantaneous Forward Voltage ( IF =1.0 Amp TC = 25℃) Maximum Instantaneous Reverse Current ( Rated DC Voltage, TC = 25℃) ( Rated DC Voltage, TC = 100℃) Reverse Recovery Time (Note 3) Typical Junction Capacitance (Note 1) Typical Thermal Resistance(Note 2) Operating Temperature Range Storage Temperature Range NOTES: Symbol VRRM VRW M VR VR(RMS) IF(AV) IFSM VF IR Trr Cj RθJA TJ Tstg FR101 FR102 FR103 FR104 FR105 FR106 FR107 50 35 100 70 200 140 400 280 1.0 30 1.3 5.0 100 150 15 50 -65 to +150 -65 to +150 250 500 600 420 800 560 1000 700 Unit V V A A V uA ns pF o C/W ℃ ℃ 1. Measured at 1.0MHz and applied reverse voltage of 4.0 volts 2. Thermal Resistance from Junction to Ambient temperature at .375”(9.5mm) lead length, P.C. board mounted. 3.Test conditions: IF = 0.5 A, IR =1.0 , IRR=0.25 A FR101 Thru FR107 FIG-1 TYPICAL FORWARD CHARACTERISITICS AVERAGE FORWARD RECTIFIED CURRENT (Amp.) AVERAGE FORWARD RECTIFIED CURRENT (Amp.) FIG-3 FORWARD CURRENT DERATING CURVE Single Phase Half Wave 60 Hz Resistive or Inductive Load 0.375 “(9.5mm) Lead Length TJ=25 C Pulse W idth=300 us 1% Duty Cycle O LEAD TEMPERATURE (℃) FIG-4TYPICAL JUNCTION CAPACITANCE FORWARD VOLTAGE (Volts) TJ=25 C F=1 MHz O FIG-2 TYPICAL REVERSE CHARACTERISTICS INSTANTANEOUS REVERSE CURRENT (uA.) TJ=50 C O TJ=25 C O JUNCTION CAPACITANCE (PF) REVERSE VOLTAGE (Volts.) FIG-5PEAK FORWARD SURGE CURRENT PEAK FORWARD SURGE CURRENT (Amp.) 8.3ms Single Half Sine-Wave (JEDEC Method) PERCENT OF PEAK REVERSE VOLTAGE (﹪) NUMBER OF CYCLES AT 60 Hz Set time base for 50/100 ns/cm FIG-6 Reverse Recovery Time Characteristic and Test Circuit Diagram