FRF1205

MOSPEC Switchmode Full Plastic Dual Fast Recovery Power Rectifiers Designed for use in switching power supplies. inverters and as free wheeling diodes. These state-of-the-art devices have the following features: ＊Glass Passivated chip junctions ＊Low Reverse Leakage Current ＊Fast Switching for High Efficiency ＊150℃ Operating Junction Temperature ＊Low Forward Voltage , High Current Capability ＊Plastic Material used Carries Underwriters Laboratory FRF1205 Thru FRF1220 FAST RECOVERY RECTIFIERS 12 AMPERES 50-200 VOLTS Flammability Classification 94V-O Plating pb free is indicated by box MAXIMUM RATINGS Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectifier Forward Current Per Leg TC=125℃ Per Total Device Peak Repetitive Forward Current (Rate VR, Square Wave, 20kHz,TC=125℃) ITO-220AB Symbol 05 VRRM VRWM VR VR(RMS) 50 10 100 FRF12 15 150 20 200 V Unit 35 70 105 140 V IF(AV) 6.0 12 12 A DIM MILLIMETERS MIN MAX 15.05 15.15 13.35 13.45 10.00 10.10 6.55 6.65 2.65 2.75 1.55 1.65 1.15 1.25 0.55 0.65 2.50 2.60 3.00 3.20 1.10 1.20 0.55 0.65 4.40 4.60 1.15 1.25 2.65 2.75 3.35 3.45 3.15 3.25 IFM A Non-Repetitive Peak Surge Current (Surge applied at rate load conditions halfware, single phase, 60Hz) Operating and Storage Junction Temperature Range IFSM 100 A TJ , Tstg -65 to +125 ℃ ELECTRIAL CHARACTERISTICS Characteristic Maximum Instantaneous Forward Voltage ( IF =6.0 Amp TC = 25℃) Maximum Instantaneous Reverse Current ( Rated DC Voltage, TC = 25℃) ( Rated DC Voltage, TC = 125℃) Reverse Recovery Time ( IF = 0.5 A, IR =1.0 , Irr =0.25 A ) Typical Junction Capacitance (Reverse Voltage of 4 volts & f=1 MHz) Symbol 05 VF 10 1.3 FRF12 15 20 V Unit A B C D E F G H I J K L M N P O Q IR 5.0 100 150 55 uA Trr CP ns PF FRF1205 Thru FRF1220 FIG-1 TYPICAL FORWARD CHARACTERISITICS AVERAGE FORWARD RECTIFIED CURRENT (Amp.) AVERAGE FORWARD RECTIFIED CURRENT (Amp.) FIG-3 FORWARD CURRENT DERATING CURVE LEAD TEMPERATURE (℃) FIG-4TYPICAL JUNCTION CAPACITANCE FORWARD VOLTAGE (Volts) FIG-2 TYPICAL REVERSE CHARACTERISTICS INSTANTANEOUS REVERSE CURRENT (Amp.) JUNCTION CAPACITANCE (PF) REVERSE VOLTAGE (Volts.) FIG-5PEAK FORWARD SURGE CURRENT PEAK FORWARD SURGE CURRENT (Amp.) PERCENT OF PEAK REVERSE VOLTAGE (﹪) NUMBER OF CYCLES AT 60 Hz Set time base for 20/50 ns/cm FIG-6 Reverse Recovery Time Characteristic and Test Circuit Diagram