MOC8206

MOTOROLA SEMICONDUCTOR TECHNICAL DATA Order this document by MOC8204/D MOC8204* GlobalOptoisolator™ [CTR = 20% Min] 6-Pin DIP Optoisolators High Voltage Transistor Output (400 Volts) The MOC8204, MOC8205 and MOC8206 devices consist of gallium arsenide infrared emitting diodes optically coupled to high voltage, silicon, phototransistor detectors in a standard 6–pin DIP package. They are designed for high voltage applications and are particularly useful in copy machines and solid state relays. • To order devices that are tested and marked per VDE 0884 requirements, the suffix ”V” must be included at end of part number. VDE 0884 is a test option. Applications • Copy Machines • Interfacing and coupling systems of different potentials and impedances • Monitor and Detection Circuits • Solid State Relays MAXIMUM RATINGS (TA = 25°C unless otherwise noted) Rating INPUT LED Forward Current — Continuous Forward Current — Peak Pulse Width = 1 µs, 330 pps LED Power Dissipation @ TA = 25°C Derate above 25°C OUTPUT TRANSISTOR Collector–Emitter Voltage Emitter–Collector Voltage Collector–Base Voltage Collector Current (Continuous) Detector Power Dissipation @ TA = 25°C Derate above 25°C TOTAL DEVICE Total Device Power Dissipation @ TA = 25°C Derate above 25°C Operating Temperature Range(2) Storage Temperature Range(2) Soldering Temperature (10 s) Isolation Surge Voltage Peak ac Voltage, 60 Hz, 1 Second Duration(1) PD TJ Tstg TL VISO 250 2.94 – 55 to +100 – 55 to +150 260 7500 mW mW/°C °C °C °C Vac(pk) VCER VECO VCBO IC PD 400 7 400 100 150 1.76 Volts Volts mA mA mW mW/°C IF IF PD 60 1.2 120 1.41 mA Amp mW mW/°C Symbol Value Unit MOC8205 [CTR = 10% Min] MOC8206 [CTR = 5% Min] *Motorola Preferred Device STYLE 1 PLASTIC 6 1 STANDARD THRU HOLE CASE 730A–04 SCHEMATIC 1 2 3 6 5 4 PIN 1. 2. 3. 4. 5. 6. ANODE CATHODE N.C. EMITTER COLLECTOR BASE 1. Isolation surge voltage is an internal device dielectric breakdown rating. 1. For this test, Pins 1 and 2 are common, and Pins 4, 5 and 6 are common. 2. Refer to Quality and Reliability Section in Opto Data Book for information on test conditions. Preferred devices are Motorola recommended choices for future use and best overall value. GlobalOptoisolator is a trademark of Motorola, Inc. REV 1 ©MotorolaInc. 1995 Motorola, Optoelectronics Device Data 1 MOC8204 MOC8205 MOC8206 ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted)(1) Characteristic INPUT LED (TA = 25°C unless otherwise noted) Reverse Leakage Current (VR = 6 V) Forward Voltage (IF = 10 mA) Capacitance (V = 0 V, f = 1 MHz) OUTPUT TRANSISTOR (TA = 25°C and IF = 0 unless otherwise noted) Collector–Emitter Dark Current (RBE = 1 MΩ) (VCE = 300 V) Collector–Base Breakdown Voltage (IC = 100 µA) Collector–Emitter Breakdown Voltage (IC = 1 mA, RBE = 1 MΩ) Emitter–Base Breakdown Voltage (IE = 100 µA) COUPLED (TA = 25°C unless otherwise noted) Output Collector Current (VCE = 10 V, IF = 10 mA, RBE = 1 MΩ) IC (CTR)(2) MOC8204 MOC8205 MOC8206 VCE(sat) VISO RISO CISO ton toff 2 (20) 1 (10) 0.5 (5) — 7500 — — — — — — — — — 1011 0.2 5 5 — — — 0.4 — — — — — Volts Vac(pk) Ohms pF µs mA (%) TA = 25°C TA = 100°C ICER — — V(BR)CBO V(BR)CER V(BR)EBO 400 400 7 — — — — — 100 250 — — — nA µA Volts Volts Volts IR VF CJ — — — — 1.2 18 10 15 — µA Volts pF Symbol Min Typ(1) Max Unit Collector–Emitter Saturation Voltage (IC = 0.5 mA, IF = 10 mA, RBE = 1 MΩ) Surge Isolation Voltage (Input to Output)(3) Peak ac Voltage, 60 Hz, 1 sec Isolation Resistance(3 ) (V = 500 V) Isolation Capacitance(1) (V = 0 V, f = 1 MHz) Turn–On Time Turn–Off Time VCC = 10 V, IC = 2 mA, RL = 100 Ω 1. Always design to the specified minimum/maximum electrical limits (where applicable). 2. Current Transfer Ratio (CTR) = IC/IF x 100%. 3. For this test LED Pins 1 and 2 are common and phototransistor Pins 4, 5 and 6 are common. TYPICAL CHARACTERISTICS 50 ICER, OUTPUT CURRENT (mA) ICER, OUTPUT CURRENT (mA) 20 10 5 2 1 0.5 0.2 0.1 1 2 5 10 20 IF, LED INPUT CURRENT (mA) 50 RBE = 106 Ω VCE = 10 V TA = 25°C RBE = 106 Ω VCE = 10 V IF = 20 mA IF = 10 mA IF = 5 mA 20 10 5 2 1 –60 –40 –20 0 20 40 60 80 TA, AMBIENT TEMPERATURE (°C) 100 Figure 1. Output Current versus LED Input Current Figure 2. Output Current versus Temperature 2 Motorola Optoelectronics Device Data MOC8204 MOC8205 MOC8206 40 ICER , OUTPUT CURRENT (mA) 10 5.0 1.0 5 1 0.05 RBE = 106 Ω TA = 25°C VF, FORWARD VOLTAGE (VOLTS) IF = 50 mA IF = 10 mA IF = 5 mA 2 1.8 PULSE ONLY PULSE OR DC 1.6 1.4 TA = –55°C 25°C 100°C 1 10 100 IF, LED FORWARD CURRENT (mA) 1000 1.2 1 0.01 0.005 0.1 0.5 1 5 10 50 100 VCE, COLLECTOR–EMITTER VOLTAGE (VOLTS) 300 Figure 3. Output Characteristics 300 IF = 50 mA 240 180 RBE = 106 Ω VCE = 10 V Figure 4. Forward Characteristics ICBO, COLLECTOR-BASE CURRENT (µA) 1000 ICER , DARK CURRENT (nA) 100 VCE = 300 V VCE = 100 V 10 VCE = 50 V 1 RBE = 106 Ω 120 60 0 –60 –40 IF = 10 mA IF = 5 mA –20 0 20 40 60 80 TA, AMBIENT TEMPERATURE (°C) 100 20 30 40 50 60 70 80 90 100 TA, AMBIENT TEMPERATURE (°C) Figure 5. Collector–Base Current versus Temperature Figure 6. Dark Current versus Temperature Motorola Optoelectronics Device Data 3 MOC8204 MOC8205 MOC8206 PACKAGE DIMENSIONS –A– 6 4 NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION L TO CENTER OF LEAD WHEN FORMED PARALLEL. DIM A B C D E F G J K L M N INCHES MIN MAX 0.320 0.350 0.240 0.260 0.115 0.200 0.016 0.020 0.040 0.070 0.010 0.014 0.100 BSC 0.008 0.012 0.100 0.150 0.300 BSC 0_ 15 _ 0.015 0.100 MILLIMETERS MIN MAX 8.13 8.89 6.10 6.60 2.93 5.08 0.41 0.50 1.02 1.77 0.25 0.36 2.54 BSC 0.21 0.30 2.54 3.81 7.62 BSC 0_ 15 _ 0.38 2.54 –B– 1 3 F 4 PL N C L –T– SEATING PLANE K G J 6 PL 0.13 (0.005) TA M M E 6 PL D 6 PL 0.13 (0.005) M M TB M A M B M STYLE 1: PIN 1. 2. 3. 4. 5. 6. ANODE CATHODE NC EMITTER COLLECTOR BASE CASE 730A–04 ISSUE G –A– 6 1 4 –B– 3 S NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. INCHES MIN MAX 0.320 0.350 0.240 0.260 0.115 0.200 0.016 0.020 0.040 0.070 0.010 0.014 0.100 BSC 0.020 0.025 0.008 0.012 0.006 0.035 0.320 BSC 0.332 0.390 MILLIMETERS MIN MAX 8.13 8.89 6.10 6.60 2.93 5.08 0.41 0.50 1.02 1.77 0.25 0.36 2.54 BSC 0.51 0.63 0.20 0.30 0.16 0.88 8.13 BSC 8.43 9.90 F 4 PL H C L –T– G E 6 PL D 6 PL 0.13 (0.005) M J K 6 PL 0.13 (0.005) TA M M SEATING PLANE TB M A M B M DIM A B C D E F G H J K L S CASE 730C–04 ISSUE D *Consult factory for leadform option availability 4 Motorola Optoelectronics Device Data MOC8204 MOC8205 MOC8206 –A– 6 4 NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION L TO CENTER OF LEAD WHEN FORMED PARALLEL. DIM A B C D E F G J K L N INCHES MIN MAX 0.320 0.350 0.240 0.260 0.115 0.200 0.016 0.020 0.040 0.070 0.010 0.014 0.100 BSC 0.008 0.012 0.100 0.150 0.400 0.425 0.015 0.040 MILLIMETERS MIN MAX 8.13 8.89 6.10 6.60 2.93 5.08 0.41 0.50 1.02 1.77 0.25 0.36 2.54 BSC 0.21 0.30 2.54 3.81 10.16 10.80 0.38 1.02 –B– 1 3 F 4 PL N C L –T– SEATING PLANE G D 6 PL K 0.13 (0.005) M J TA M E 6 PL B M *Consult factory for leadform option availability CASE 730D–05 ISSUE D Motorola Optoelectronics Device Data 5 MOC8204 MOC8205 MOC8206 Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters can and do vary in different applications. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. How to reach us: USA / EUROPE: Motorola Literature Distribution; P.O. Box 20912; Phoenix, Arizona 85036. 1–800–441–2447 MFAX: RMFAX0@email.sps.mot.com – TOUCHTONE (602) 244–6609 INTERNET: http://Design–NET.com JAPAN: Nippon Motorola Ltd.; Tatsumi–SPD–JLDC, Toshikatsu Otsuki, 6F Seibu–Butsuryu–Center, 3–14–2 Tatsumi Koto–Ku, Tokyo 135, Japan. 03–3521–8315 HONG KONG: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park, 51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852–26629298 6 ◊ *MOC8204/D* Motorola OptoelectronicsMOC8204/D Device Data