A214R

厂商：
MPD
封装：
描述：
A214R - Compact, Regulated, 2W Single & Dual Output DC/DC Converters - MicroPower Direct, LLC

数据手册：

下载A214R.pdf

立即购买

详情介绍
数据手册
价格&库存

A214R 数据手册

A200R Series Compact, Regulated, 2W Single & Dual Output DC/DC Converters Electrical Speciﬁcations Speciﬁcations typical @ +25°C, nominal input voltage & rated output current, unless otherwise noted. Speciﬁcations subject to change without notice. Input Key Features: Parameter Conditions ● 2W Output Power Input Voltage Range ● Compact DIP Case ● 500 VDC Isolation ● Tight Line/Load Regulation Input Filter Reverse Polarity Input Current ● Single & Dual Outputs Short Circuit Input Power ● 20 Standard Models Output ● 1.0 MH MTBF Parameter ● Industry Standard Pin-Out Output Voltage Accuracy Output Voltage Balance Line Regulation Load Regulation Ripple & Noise (20 MHz) (Note 1) Ripple & Noise (20 MHz) Ripple & Noise (20 MHz) Output Power Protection Transient Recovery Time (Note 2) Transient Response Deviation Temperature Coefﬁcient Output Short Circuit Min. 5 VDC Input 4.5 12 VDC Input 10.8 24 VDC Input 21.6 48 VDC Input 43.2 π (Pi) Filter Typ. 5.0 12.0 24.0 48.0 Max. 5.5 13.2 26.4 52.8 0.5 2,000 Units VDC A mW Units % % % % mV P - P mV P - P mV rms % μSec % %/ºC Conditions Dual Output , Balanced Loads Vin = Min to Max Iout = 10% to 100% Over Line, Load & Temp. Min. Typ. ±2.0 ±1.0 ±0.2 ±0.2 40 Max. ±4.0 ±3.0 ±0.3 ±0.5 50 75 5 50 ±6.0 ±0.02 120 50% Load Step Change ±0.01 Continuous Conditions 60 Seconds 500 VDC 100 kHz, 1V Min. 500 1,000 40 Conditions Typ. Max. General Parameter Isolation Voltage Isolation Resistance Isolation Capacitance Switching Frequency Units VDC MΩ pF kHz Units ºC ºC ºC % 100 80 150 Environmental Parameter Operating Temperature Range Storage Temperature Range Cooling Humidity Min. Typ. -25 -25 -40 Free Air Convection RH, Non-condensing Max. +71 +90 +125 95 MicroPower Direct 232 Tosca Drive Stoughton, MA 02072 USA T: (781) 344-8226 F: (781) 344-8481 E: sales@micropowerdirect.com W: www.micropowerdirect.com Physical Case Size Case Material Weight 1.25 x 0.80 x 0.40 Inches (31.8 x 20.3 x 10.2 mm) Non-Conductive Black Plastic (UL94-V0) 0.42 Oz (12g) Conditions MIL HDBK 217F, 25ºC, Gnd Benign Conditions 5 VDC Input 12 VDC Input 24 VDC Input 48 VDC Input 1.5 mm From Case For 10 Sec. All Models Min. Typ. 800 Typ. Max. Units kHours Units VDC ºC mW Reliability Speciﬁcations Parameter MTBF Absolute Maximum Ratings Parameter Input Voltage Surge (1 Sec) Lead Temperature Internal Power Dissipation Min. -0.7 -0.7 -0.7 -0.7 Max. 7.5 15.0 30.0 55.0 260 3,000 Caution: Exceeding Absolute Maximum Ratings may damage the module. These are not continuous operating ratings. Model Selection Guide Model Number A201R A202R A203R A204R A205R A211R A212R A213R A214R A215R A221R A222R A223R A224R A225R A231R A232R A233R A234R A235R Notes: Voltage (VDC) Nominal 5 5 5 5 5 12 12 12 12 12 24 24 24 24 24 48 48 48 48 48 Range 4.5 - 5.5 4.5 - 5.5 4.5 - 5.5 4.5 - 5.5 4.5 - 5.5 10.8 - 13.2 10.8 - 13.2 10.8 - 13.2 10.8 - 13.2 10.8 - 13.2 21.6 - 26.4 21.6 - 26.4 21.6 - 26.4 21.6 - 26.4 21.6 - 26.4 43.2 - 52.8 43.2 - 52.8 43.2 - 52.8 43.2 - 52.8 43.2 - 52.8 Output Fuse Rating Reﬂected Efﬁciency Slow-Blow Current Ripple Voltage Current (%, Typ) (mA) (VDC) (mA, Max) (mA, Min) Full-Load No-Load Current (mA, Typ) Input Current (mA) 800 730 690 740 740 330 295 265 280 280 163 135 135 135 135 83 70 70 80 80 80 80 80 80 80 40 40 40 40 40 20 20 20 20 20 10 10 10 10 10 80 80 80 80 80 30 30 30 30 30 15 15 15 15 15 10 10 10 10 10 5.0 12.0 15.0 ±12.0 ±15.0 5.0 12.0 15.0 ±12.0 ±15.0 5.0 12.0 15.0 ±12.0 ±15.0 5.0 12.0 15.0 ±12.0 ±15.0 400 165 133 ±83 ±66 400 165 133 ±83 ±66 400 165 133 ±83 ±66 400 165 133 ±83 ±66 0.0 0.0 0.0 ±0.0 ±0.0 0.0 0.0 0.0 ±0.0 ±0.0 0.0 0.0 0.0 ±0.0 ±0.0 0.0 0.0 0.0 ±0.0 ±0.0 50 54 57 53 51 50 56 62 59 59 51 61 61 61 61 50 59 59 51 51 1,500 1,500 1,500 1,500 1,500 700 700 700 700 700 350 350 350 350 350 135 135 135 135 135 1. When measuring output ripple, it is recommended that an external 0.33 μF ceramic capacitor be placed from the +Vout pin to the -Vout pin for single output units and from each output to common for dual output units. For noise sensitive applications, the use of 1.5 μF capacitors will reduce the output ripple. 2. Transient recovery is measured to within a 1% error band for a load step change of 50% to 100%. 3. Operation at no-load will not damage these units. However, they may not meet all speciﬁcations. 4. Dual output units may be connected to provide a 24 VDC or 30 VDC output. To do this, connect the load across the positive (+Vout) and negative (-Vout) outputs and ﬂoat the output common. 5. The converter should be connected to a low ac-impedance source. An input source with a highly inductive impedance may affect the stability of the converter. In applications where the converter output loading is high and input power is supplied over long lines, it may be necessary to use a capacitor on the input to insure start-up. In this case, it is recommended that a low ESR (ESR

下载 PDF

A214R

物料型号： - 型号编号包括A201R至A235R，涵盖不同的输入电压和输出电压及电流规格。

器件简介： - A200R系列是紧凑、规范的2W单双输出DC/DC转换器，具有500VDC隔离、紧凑的DIP封装、严格的线路/负载调节、20种标准型号等特点。

引脚分配： - 引脚1和24为+Vin（单输出和双输出）； - 引脚2和23为NC（双输出时为-Vout）； - 引脚3和22为NC（双输出时为Common）； - 引脚10和15为-Vout（单输出和双输出）； - 引脚11和14为+Vout（单输出和双输出）； - 引脚12和13为-Vin（单输出和双输出）。

参数特性： - 输入电压范围：5VDC、12VDC、24VDC、48VDC，具体数值依型号而定。 - 输出电压精度：±2.0%至±4.0%。 - 线路调整率：±0.2%至±0.3%。 - 负载调整率：±0.2%至±0.5%。 - 纹波和噪声：20MHz下40mVP-P至75mVP-P。 - 输出功率保护：120%。 - 隔离电压：500VDC。 - 工作温度范围：-25°C至+71°C或+90°C。 - 存储温度范围：-40°C至+125°C。

功能详解： - 该系列转换器支持单双输出，具有高MTBF（1.0MH），符合行业标准引脚排列，适用于多种输入电压和输出电压电流配置。

应用信息： - 适用于需要高隔离电压和紧凑尺寸的场合，如工业控制、通信设备等。

封装信息： - 封装尺寸为1.25 x 0.80 x 0.40英寸（31.8 x 20.3 x 10.2毫米），材料为非导电黑色塑料（UL94-V0），重量为0.42盎司（12克）。

A214R 价格&库存

-> 查询更多价格&库存

很抱歉，暂时无法提供与“A214R”相匹配的价格&库存，您可以联系我们找货

免费人工找货

搜索历史

A214R

相关技术文章