A303RW

厂商：
MPD
封装：
描述：
A303RW - Wide Input Range, 3W Single & Dual Output DC/DC Converters - MicroPower Direct, LLC

数据手册：

下载A303RW.pdf

立即购买

详情介绍
数据手册
价格&库存

A303RW 数据手册

A300RW Series Wide Input Range, 3W Single & Dual Output DC/DC Converters Electrical Speciﬁcations Speciﬁcations typical @ +25°C, nominal input voltage & rated output current, unless otherwise noted. Speciﬁcations subject to change without notice. Key Features: • 3W Output Power • UL Approved (File E245422) • 2:1 Input Voltage Range • 1,500 VDC Isolation • Compact DIP Case • Single & Dual Outputs • 28 Standard Models • 1.0 MH MTBF • Industry Standard Pin-Out Input Parameter Input Start Voltage Input Filter Reverse Polarity Input Current Short Circuit Input Power Output Parameter Output Voltage Accuracy Output Voltage Balance Line Regulation Load Regulation Ripple & Noise (20 MHz) (Note 1) Ripple & Noise (20 MHz) Ripple & Noise (20 MHz) Output Power Protection Transient Recovery Time (Note 2) Transient Response Deviation Temperature Coefﬁcient Output Short Circuit General Parameter Isolation Voltage Isolation Resistance Isolation Capacitance Switching Frequency Environmental Parameter Operating Temperature Range Operating Temperature Range Storage Temperature Range Cooling Humidity Physical Case Size Case Material Weight Reliability Speciﬁcations Parameter MTBF Safety Standards Safety Approvals Absolute Maximum Ratings Parameter Input Voltage Surge (1 Sec) Lead Temperature Internal Power Dissipation Conditions Min. 5 VDC Input 3.5 12 VDC Input 4.5 24 VDC Input 8.0 48 VDC Input 16.0 π (Pi) Filter Typ. 4.0 7.0 12.0 24.0 Max. 4.5 9.0 18.0 36.0 1.0 2,000 Max. ±1.0 ±2.0 ±0.5 ±0.5 60 100 15 500 ±5.0 ±0.02 Units VDC 1,000 Conditions Dual Output , Balanced Loads Vin = Min to Max Iout = 10% to 100% Over Line, Load & Temp. 120 50% Load Step Change 300 ±3.0 ±0.01 Continuous (Autorecover) Min. 1,500 1,000 Typ. Min. Typ. ±0.5 ±0.5 ±0.2 ±0.2 45 A mW Units % % % % mV P - P mV P - P mV rms % µSec % %/ºC RoHS Compliant Conditions 60 Seconds 500 VDC 100 kHz, 1V Max. 65 300 100 Units VDC MΩ pF kHz Units ºC ºC ºC % Conditions MicroPower Direct 292 Page Street Suite D Stoughton, MA 02072 USA T: (781) 344-8226 F: (781) 344-8481 E: sales@micropowerdirect.com W: www.micropowerdirect.com Min. Typ. -40 +25 -40 -40 Free Air Convection RH, Non-condensing Ambient Case Max. +71 +90 +125 95 1.25 x 0.80 x 0.40 Inches (31.8 x 20.3 x 10.2 mm) Non-Conductive Black Plastic (UL-94V0) 0.42 Oz (12g) Conditions Min. Typ. MIL HDBK 217F, 25ºC, Gnd Benign 1.0 UL 1950, EN 60950, IEC 60950 UL, cUL; File No. E245422 Conditions 5 VDC Input 12 VDC Input 24 VDC Input 48 VDC Input 1.5 mm From Case For 10 Sec All Models Min. -0.7 -0.7 -0.7 -0.7 Typ. Max. Units MHours Max. 11.0 25.0 50.0 100.0 260 2,500 Units VDC ºC mW Caution: Exceeding Absolute Maximum Ratings may damage the module. These are not continuous operating ratings. Model Selection Guide Model Number A301RW A302RW A303RW A304RW A305RW A306RW A307RW A311RW A312RW A313RW A314RW A315RW A316RW A317RW A321RW A322RW A323RW A324RW A325RW A326RW A327RW A331RW A332RW A333RW A334RW A335RW A336RW A337RW Voltage (VDC) Nominal 5 5 5 5 5 5 5 12 12 12 12 12 12 12 24 24 24 24 24 24 24 48 48 48 48 48 48 48 Range 4.5 - 9.0 4.5 - 9.0 4.5 - 9.0 4.5 - 9.0 4.5 - 9.0 4.5 - 9.0 4.5 - 9.0 9.0 - 18.0 9.0 - 18.0 9.0 - 18.0 9.0 - 18.0 9.0 - 18.0 9.0 - 18.0 9.0 - 18.0 18.0 - 36.0 18.0 - 36.0 18.0 - 36.0 18.0 - 36.0 18.0 - 36.0 18.0 - 36.0 18.0 - 36.0 36.0 - 75.0 36.0 - 75.0 36.0 - 75.0 36.0 - 75.0 36.0 - 75.0 36.0 - 75.0 36.0 - 75.0 Input Current (mA) Full-Load 566 685 779 779 694 800 800 223 267 305 305 271 313 313 109 132 149 149 132 152 152 55 66 75 75 65 75 75 Output Reﬂected Efﬁciency Current Ripple Voltage Current (%, Typ) (VDC) (mA, Max) (mA, Min) No-Load Current (mA, Typ) Fuse Rating Slow-Blow (mA) 1,500 1,500 1,500 1,500 1,500 1,500 1,500 700 700 700 700 700 700 700 350 350 350 350 350 350 350 135 135 135 135 135 135 135 40 40 40 40 40 40 40 20 20 20 20 20 20 20 5 5 5 5 5 5 5 3 3 3 3 3 3 3 100 100 100 100 100 100 100 30 30 30 30 30 30 30 15 15 15 15 15 15 15 10 10 10 10 10 10 10 3.3 5.0 12.0 15.0 ±5.0 ±12.0 ±15.0 3.3 5.0 12.0 15.0 ±5.0 ±12.0 ±15.0 3.3 5.0 12.0 15.0 ±5.0 ±12.0 ±15.0 3.3 5.0 12.0 15.0 ±5.0 ±12.0 ±15.0 600.0 500.0 250.0 200.0 ±250.0 ±125.0 ±100.0 600.0 500.0 250.0 200.0 ±250.0 ±125.0 ±100.0 600.0 500.0 250.0 200.0 ±250.0 ±125.0 ±100.0 600.0 500.0 250.0 200.0 ±250.0 ±125.0 ±100.0 60.0 50.0 25.0 20.0 ±25.0 ±12.5 ±10.0 60.0 50.0 25.0 20.0 ±25.0 ±12.5 ±10.0 60.0 50.0 25.0 20.0 ±25.0 ±12.5 ±10.0 60.0 50.0 25.0 20.0 ±25.0 ±12.5 ±10.0 70 73 77 77 72 75 75 74 78 82 82 77 80 80 76 79 84 84 79 82 82 76 79 84 84 80 84 84 Notes: 1. When measuring output ripple, it is recommended that an external 0.47 µF ceramic capacitor be placed from the +Vout pin to the -Vout pin for single output units and from each output to common for dual output units. For noise sensitive applications, the use of 3.3 µF capacitors will reduce the output ripple. 2. Transient recovery is measured to within a 1% error band for a load step change of 75% to 100%. 3. Operation at no-load will not damage these units. However, they may not meet all speciﬁcations. 4. Dual output units may be connected to provide a 10 VDC, 24 VDC or 30 VDC output. To do this, connect the load across the positive (+Vout) and negative (-Vout) outputs and ﬂoat the output common. 5. The converter should be connected to a low ac-impedance source. An input source with a highly inductive impedance may affect the stability of the converter. In applications where the converter output loading is high and input power is supplied over long lines, it may be necessary to use a capacitor on the input to insure start-up. In this case, it is recommended that a low ESR (ESR

下载 PDF

A303RW

1. 物料型号： - 型号编号：A300RW系列，包括A301RW至A337RW等不同型号。

2. 器件简介： - A300RW系列是一种宽输入范围、3W单路和双路输出的DC/DC转换器。它们具有UL认证，2:1输入电压范围，1,500 VDC隔离，紧凑的DIP封装。

3. 引脚分配： - 单路输出引脚：2, 3为-Vin；14为+Vout；16为-Vout；22, 23为+Vin。 - 双路输出引脚：2, 3为-Vin；9为公共地；11为-Vout；14为+Vout；16为公共地；22, 23为+Vin。

4. 参数特性： - 输入起始电压：不同输入电压对应的起始电压不同。 - 反向极性输入电流：最大1.0 A。 - 短路输入功率：1,000 mW至2,000 mW。 - 输出电压精度：±0.5%至±1.0%。 - 线路调整率和负载调整率：±0.2%至±0.5%。 - 纹波和噪声：45 mVP-P至100 mVP-P。 - 输出功率保护：120%。 - 瞬态恢复时间：300至500微秒。 - 温度系数：±0.01%/°C至±0.02%/°C。 - 输出短路保护：连续（自动恢复）。

5. 功能详解： - 提供单路和双路输出。 - 28种标准型号。 - 1.0 MH的MTBF。 - 行业标准引脚排列。

6. 应用信息： - 适用于需要宽输入电压范围和高隔离电压的场合。 - 适合在各种工业和商业应用中使用。

7. 封装信息： - 封装尺寸：1.25 x 0.80 x 0.40英寸（31.8x 20.3x 10.2毫米）。 - 封装材料：非导电黑色塑料（UL-94V0）。 - 重量：0.42盎司（12克）。

A303RW 价格&库存

-> 查询更多价格&库存

很抱歉，暂时无法提供与“A303RW”相匹配的价格&库存，您可以联系我们找货

免费人工找货

搜索历史

A303RW

相关技术文章