MPE-25S-05

厂商：
MPD
封装：
描述：
MPE-25S-05 - Single Output, 25W Compact, Enclosed AC/DC Power Supplies - MicroPower Direct, LLC

数据手册：

下载MPE-25S-05.pdf

立即购买

详情介绍
数据手册
价格&库存

MPE-25S-05 数据手册

MPE-25S Series Si l O Single Output, 25W 2 Compact, Enclosed AC/DC Power Supplies Electrical Speciﬁcations Key Features: • 25W Output Power • Universal 85-264 AC Input • EN60950 Approved • Four Single Output Models • Meets EN55022 • >325 kHour MTBF • Compact Metal Enclosure Speciﬁcations typical @ +25°C, nominal input voltage & rated output current, unless otherwise noted. Speciﬁcations subject to change without notice. Input Parameter Input Voltage Range Input Frequency Input Current Inrush Current Safety Ground Leakage Current Conditions Min. Typ. 85 120 47 See Model Selection Guide Cold Start, 115 VAC 15.0 Cold Start, 230 VAC 30.0 115 VAC 230 VAC Universal Max. 264 370 63 Units VAC VDC Hz A Pk 0.45 0.75 Max. mA Units Output Parameter Output Voltage Output Current Output Voltage Adjustment Output Voltage Tolerance, See Note 1 Ripple & Noise (20 MHz) , See Note 2 Conditions Min. Typ. See Model Selection Guide See Model Selection Guide See Model Selection Guide See Model Selection Guide See Model Selection Guide 115 VAC 12 230 VAC 80 115 VAC 800 230 VAC 300 115 VAC 50 230 VAC 50 ±0.02 Continuous (Autorecovery) See Note 3 115 See Note 4 135 Conditions Input to Output Input to Ground Output to Ground 500 VDC Conducted Electrostatic Discharge (ESD) RF Field Susceptibility Electrical Fast Transients/Bursts On Mains Surge Min. 3,000 1,500 500 Typ. RoHS Compliant Hold-Up Time Set-Up Time Rise Time Temperature Coefﬁcient Short Circuit Protection Over Voltage Protection Overload Protection mSec mSec mSec %/°C 135 165 Max. % Vout % Iout Units VAC General Parameter Isolation Voltage Isolation resistance EMI/RFI MicroPower Direct 292 Page Street Suite D Stoughton, MA 02072 USA T: (781) 344-8226 F: (781) 344-8481 E: sales@micropowerdirect.com W: www.micropowerdirect.com EMC Compliance Switching Frequency 100 MΩ EN 55022; EN 61000-3-2, -3 IEC/EN 61000-4-2, -6, -8, -11 IEC/EN61000-4-3 IEC/EN 61000-4-4 IEC/EN 61000-4-5 56 kHz Units °C °C % Environmental Parameter Operating Temperature Range Storage Temperature Range Cooling Humidity Conditions Min. Typ. Max. -10 +25 +60 -20 +85 Free Air Convection (See Derating Curve) RH, Non-condensing 20 90 Ambient Physical Case Size Case Material Weight 3.90 x 3.82 x 1.42 Inches (99.0 x 97.0 x 36.0 mm) Vented Metal Enclosure 13.7 Oz (0.39 kg) Conditions Min. Typ. Max. Units MIL HDBK 217F, 25°C, Gnd Benign 325 kHours IEN 60950, IEC 60950 10~500 Hz, 2G 10 min/1 Cycle. Period of 60 min each along X, Y &Z Axis Reliability Speciﬁcations Parameter MTBF Safety Standards Vibration Model Selection Guide Input Model Number MPE-25S-05 MPE-25S-12 MPE-25S-15 MPE-25S-24 Current (A) 115 VAC 0.6 0.6 0.6 0.6 230 VAC 0.35 0.35 0.35 0.35 Voltage (VDC) Rated 5.0 12.0 15.0 24.0 Adjust 4.75 - 5.5 10.8 - 13.2 13.5 - 16.5 21.6 - 26.4 Output Current (A) Rated 5.0 2.1 1.7 1.1 Range 0 to 5.0 0 to 2.1 0 to 1.7 0 to 1.1 Output Voltage Tolerance (%) ±2.0 ±1.0 ±1.0 ±1.0 Ripple & Noise (mV p-p) Efﬁciency (%, Typ) 50 100 100 100 72 76 77 80 Notes: 1. Output voltage tolerance includes the the effects of set point accuracy, line regulation and load regulation. 2. Ripple and noise is measured at 20 MHz bandwidth using a 12 inch twisted pair wire to connect to the power supply terminals. A 0.1 µF and a 47 µF capacitor are connected in parallel as close to the power supply terminals as possible. 3. Overvoltage protection is provided by a “hiccup mode” circuit. The unit recovers automatically when the fault condition is removed. 4. Overload protection is provided by foldback current limiting. The unit recovers automatically when the fault condition is removed. 5. Efficiency is measured with a 115 VAC input. 6. It is recommended that a fuse be used on the input of a power supply for protection. For the MPE-25S series, a 2.5A/250 VAC slow blow should be used. Mechanical Dimensions Pin Connections Pin 1 2 3 4 5 Function -Vout +Vout AC-Ground AC-Line AC-Neutral Notes: • All dimensions are typical in inches (mm) • Tolerance x.xx = ±0.01 (±0.25) Derating Curve Static Characteristics (24 Vout) MicroPower Direct www.micropowerdirect.com • 292 Page Street Ste D Stoughton, MA 02072 TEL: (781) 344-8226 • FAX: (781) 344-8481 • E-Mail: sales@micropowerdirect.com

下载 PDF

MPE-25S-05

1. 物料型号： - 型号编号包括：MPE-25S-05, MPE-25S-12, MPE-25S-15, MPE-25S-24。

2. 器件简介： - MPE-25S系列是单路输出、25W的SiO2紧凑型、封闭式AC/DC电源供应器。具有25W输出功率、通用85-264AC输入、EN60950认证、四款单路输出型号、满足EN55022标准、超过325,000小时MTBF、紧凑金属外壳等特点。

3. 引脚分配： - 引脚1：-Vout（负输出） - 引脚2：+Vout（正输出） - 引脚3：AC-Ground（交流地） - 引脚4：AC-Line（交流火线） - 引脚5：AC-Neutral（交流零线）

4. 参数特性： - 输入电压范围：85-264VAC或120-370VDC。 - 输入频率：47-63Hz。 - 输出电压容差：±2.0%至±1.0%，具体取决于型号。 - 纹波和噪声：在20MHz带宽下测量，值为50mVp-p至100mVp-p。 - 效率：72%至80%，典型值。 - 短路保护：连续（自动恢复）。 - 过压保护：115%至135% Vout。 - 过载保护：135%至165% Iout。

5. 功能详解： - 输出电压容差包括设定点精度、线路调整和负载调整的影响。 - 纹波和噪声是在20MHz带宽下使用12英寸双绞线连接到电源端子测量的。 - 过压保护通过“打嗝模式”电路提供，当故障条件移除时单元自动恢复。 - 过载保护通过折叠电流限制提供，当故障条件移除时单元自动恢复。

6. 应用信息： - 该系列电源适用于需要25W输出功率的场合，具有广泛的输入电压范围和高效率，适合多种AC/DC电源转换需求。

7. 封装信息： - 封装尺寸：3.90 x 3.82 x 1.42英寸（99.0 x 97.0 x 36.0毫米）。 - 封装材料：通风金属外壳。 - 重量：13.7盎司（0.39公斤）。

MPE-25S-05 价格&库存

-> 查询更多价格&库存

很抱歉，暂时无法提供与“MPE-25S-05”相匹配的价格&库存，您可以联系我们找货

免费人工找货

搜索历史

MPE-25S-05

相关技术文章