MPE-320S-48

厂商：
MPD
封装：
描述：
MPE-320S-48 - Single Output, 320W Compact, Enclosed AC/DC Power Supplies - MicroPower Direct, LLC

数据手册：

下载MPE-320S-48.pdf

立即购买

详情介绍
数据手册
价格&库存

MPE-320S-48 数据手册

MPE-320S Series Si l O Single Output, 320W 320 Compact, Enclosed AC/DC Power Supplies Electrical Speciﬁcations Key Features: • 320W Output Power • Selectable 88-264 AC Input • EN 60950 Approved • Internal Fan With Control • Eight Single Output Models • Meets EN55022 • >188 kHour MTBF • Compact Metal Enclosure Speciﬁcations typical @ +25°C, nominal input voltage & rated output current, unless otherwise noted. Speciﬁcations subject to change without notice. Input Parameter Input Voltage Range Input Frequency Input Current Inrush Current Safety Ground Leakage Current Conditions Min. Typ. 88 115 Switch Selectable 176 220 248 47 See Model Selection Guide Cold Start, 115 VAC 20.0 Cold Start, 230 VAC 40.0 115 VAC 230 VAC Max. 132 264 370 63 Units VAC VDC Hz A Pk 2.0 3.5 mA Units Output Parameter Output Voltage Output Current Output Voltage Adjustment Output Voltage Tolerance, See Note 1 Ripple & Noise (20 MHz), See Note 2 Hold-Up Time Conditions Min. Typ. Max. See Model Selection Guide See Model Selection Guide See Model Selection Guide See Model Selection Guide See Model Selection Guide 115 VAC 20 230 VAC 24 230 VAC 2,000 230 VAC 20 ±0.02 Continuous (Autorecovery) See Note 3 115 135 See Note 4 105 135 Fan On, 5V - 15 Vout RT1 >65 °C Fan On, 24V - 48 Vout RT1 >70 °C Fan Off, 5V - 15 Vout RT1 80 °C Conditions Input to Output Input to Ground Output to Ground 500 VDC Conducted Electrostatic Discharge (ESD) RF Field Susceptibility Electrical Fast Transients/Bursts On Mains Surge Min. 3,000 1,500 500 Typ. Max. mSec mSec mSec %/°C % % RoHS Compliant Set-Up Time Rise Time Temperature Coefﬁcient Short Circuit Protection Over Voltage Protection Overload Protection Fan Control (Over Temp Control) General Parameter Isolation Voltage Units VAC 100 MΩ EN 55022; EN 61000-3-2, -3 IEC/EN 61000-4-2, -6, -8, -11 IEC/EN61000-4-3 IEC/EN 61000-4-4 IEC/EN 61000-4-5 75 kHz Units °C °C % MicroPower Direct 292 Page Street Suite D Stoughton, MA 02072 USA T: (781) 344-8226 F: (781) 344-8481 E: sales@micropowerdirect.com W: www.micropowerdirect.com Isolation resistance EMI/RFI EMC Compliance Switching Frequency Environmental Parameter Operating Temperature Range Storage Temperature Range Cooling Humidity Conditions Min. Typ. Max. -10 +25 +60 -20 +85 Internal Fan With Built In Control RH, Non-condensing 95 Ambient Physical Case Size Case Material Weight 8.46 x 4.52 x 1.97 Inches (215.0 x 115.0 x 50.0 mm) Vented Metal Enclosure 38.1 Oz (1.08 kg) Conditions Min. Typ. Max. Units MIL HDBK 217F, 25°C, Gnd Benign 188 kHours IEN 60950, IEC 60950 10~500 Hz, 2G 10 min/1 Cycle. Period of 60 min each along X, Y &Z Axis Reliability Speciﬁcations Parameter MTBF Safety Standards Vibration Model Selection Guide Model Number MPE-320S-05 MPE-320S-7.5 MPE-320S-12 MPE-320S-13.5 MPE-320S-15 MPE-320S-24 MPE-320S-27 MPE-320S-48 Input Current (A) 115 VAC 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 230 VAC 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 Output Voltage (VDC) Rated 5.0 7.5 12.0 13.5 15.0 24.0 27.0 48.0 Adjust 4.5 - 5.7 6.0 - 9.0 10.0 - 13.2 12.0 - 15.0 13.5 - 18.0 20.0 - 26.4 26.0 - 32.0 41.0 - 56.0 Current (A) Rated 50.0 36.0 25.0 22.0 20.0 12.5 11.0 6.5 Range 0 to 50.0 0 to 36.0 0 to 25.0 0 to 22.0 0 to 20.0 0 to 12.5 0 to 11.0 0 to 6.5 Output Tolerance (%) ±2.0 ±2.0 ±1.0 ±1.0 ±1.0 ±1.0 ±1.0 ±1.0 Ripple & Noise (mV p-p) Efﬁciency (%, Typ) 150 150 150 150 150 150 200 240 77 80 82 83 84 86 86 87 Notes: 1. Output voltage tolerance includes the the effects of set point accuracy, line regulation and load regulation. 2. Ripple and noise is measured at 20 MHz bandwidth using a 12 inch twisted pair wire to connect to the power supply terminals. A 0.1 µF and a 47 µF capacitor are connected in parallel as close to the power supply terminals as possible. 3. Overvoltage protection is provided by a “hiccup mode” circuit. The unit recovers automatically when the fault condition is removed. 4. Overload protection is provided by foldback current limiting. The unit recovers automatically when the fault condition is removed. 5. It is recommended that a fuse be used on the input of a power supply for protection. For the MPE-320S series, a 10A/250 VAC slow blow should be used. Mechanical Dimensions Pin Connections Pin 1 2 3 4 5 6 7 8 9 Function AC-Line AC-Neutral AC-Ground -Vout -Vout -Vout +Vout +Vout +Vout Notes: • All dimensions are typical in inches (mm) • Tolerance x.xx = ±0.01 (±0.25) Derating Curve Static Characteristics MicroPower Direct www.micropowerdirect.com • 292 Page Street Ste D Stoughton, MA 02072 TEL: (781) 344-8226 • FAX: (781) 344-8481 • E-Mail: sales@micropowerdirect.com

下载 PDF

MPE-320S-48

1. 物料型号： - 该文档描述的是MPE-320S系列，单输出320W的Si l O 320紧凑型AC/DC电源。

2. 器件简介： - MPE-320S系列电源提供320W输出功率，可选择88-264VAC输入，符合EN 60950安全标准，内置风扇控制，共有八种单输出型号，满足EN55022标准。

3. 引脚分配： - 引脚1：AC-Line（交流线） - 引脚2：AC-Neutral（交流零线） - 引脚3：AC-Ground（交流地线） - 引脚4：-Vout（负输出） - 引脚5：-Vout（负输出） - 引脚6：-Vout（负输出） - 引脚7：+Vout（正输出） - 引脚8：+Vout（正输出） - 引脚9：+Vout（正输出）

4. 参数特性： - 输入电压范围：88VAC至264VAC，或248VDC至370VDC。 - 输入频率：47Hz至63Hz。 - 输出电压和电流：根据不同型号，输出电压和电流有所不同。 - 具有短路保护、过压保护、过载保护等功能。 - MTBF（平均故障间隔时间）大于188,000小时。

5. 功能详解： - 输出电压调整：根据不同型号，调整范围有所不同。 - 纹波和噪声：在20MHz带宽下测量。 - 保持时间、建立时间和上升时间：根据不同输入电压，这些参数有所不同。 - 温度系数：±0.02%/°C。

6. 应用信息： - 该系列电源因其高效率和紧凑型设计，适用于多种应用场景，如工业控制、通信设备等。

7. 封装信息： - 尺寸：8.46 x 4.52 x 1.97英寸（215.0 x 115.0 x 50.0毫米），重量为38.1盎司（1.08公斤）。 - 封装材料：通风金属外壳。

MPE-320S-48 价格&库存

-> 查询更多价格&库存

很抱歉，暂时无法提供与“MPE-320S-48”相匹配的价格&库存，您可以联系我们找货

免费人工找货

搜索历史

MPE-320S-48

相关技术文章