EVKT-MP2696A

EVKT-MP2696A Product Brief MP2696A Evaluation Kit I2C-Controlled, Single-Cell Switching Charger With Power Path Management and 3A Boost Output The MP2696A is a highly integrated, flexible, switch-mode battery charge management and system power path management device. It is designed for a single-cell Li-ion and Li-Polymer battery, and is ideal for a wide range of portable applications. The device integrates a full-featured, battery charging profile with three phases: pre-charge, constant current, and constant voltage charge. It also manages the input power source using input current limit regulation and minimum input voltage regulation. The MP2696A can switch to boost mode to generate the system power output from the battery. It has an integrated, IN-to-SYS passthrough path to pass the input voltage to system. With the I2C interface, the host can program the charge and boost parameters and read the device’s operating status in the registers. Safety features include: SYS short circuit protection, input over-voltage protection, battery under-voltage protection, thermal shutdown, and JEITA battery temperature monitoring. Kit Contents  EV2696A evaluation board EV2696A-Q-00B  Communication interface with accessories (EVKT-USBI2C-02) o USB to I2C communication interface o Ribbon cable  Online resources include: datasheet, user guide, product brief, and GUI *Laptop not included Feature Specification Supply for Board 4.5V to 6.0V Operating Input Voltage 4.5V to 6.0V Battery Regulation Voltage 3.60V to 4.45V Charge Current 500mA to 3600mA Input Voltage Regulation 4.45V to 4.8V Input Current Limit 100mA to 3000mA Boost Output Voltage 5.05V to 5.225V Discharge Peak Current 5.0A to 6.5A Operating Systems Supported Windows XP, 7, and later System Requirements Minimum 22.2MB free GUI Software MP2696A V1.0 EVB Size (LxW) 6.35cmx6.35cm Note: The GUI installation file and supplemental documents can be downloaded from the MPS website. MP2696A Evaluation Kit Product Brief Rev. 1.0 MonolithicPower.com 9/26/2019 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. © 2019 MPS. All Rights Reserved. 1 USER GUIDE – MP2696A EVALUATION KIT (EVKT-MP2696A) Quick Start (Refer to user guide for more details.) 1. 2. 3. 4. 5. Install the GUI software. Use the provided ribbon cable to connect the EVB and the USB to the I2C communication interface. Preset the power supply output to between 4.5V and 6.0V, then connect the EVB. Connect the communication interface to the PC, and turn the power supply on. Open the GUI software and program as needed. *Kit offers rapid application assessment, and requires minimal external components. Input Power Supply GUI USB Cable USB to I2C Communication Interface Ribbon Cable EV2696A-Q00B Battery Load MP2696A Evaluation Kit Product Brief Rev. 1.0 MonolithicPower.com 9/26/2019 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. © 2019 MPS. All Rights Reserved. 2