MP2013GG-P

MP2013 The Future of Analog IC Technology 40V, 150mA, Low Quiescent Current Linear Regulator DESCRIPTION FEATURES The MP2013 is a low power linear regulator that supplies power to systems with high voltage batteries. It includes a wide 2.5V to 40V input range, low dropout voltage and low quiescent supply current. The low quiescent current and low dropout voltage allow operations at extremely low power levels. Therefore, the MP2013 are ideal for the low power microcontrollers and the battery-powered equipments.    The MP2013 provides wide variety of fixed output voltage options (if request): 1.8V, 1.9V, 2.3V, 2.5V, 3.0V, 3.3V, 3.45V, 5.0V; and also provides the output adjustable option (from 1.215V to 15V). The regulator output current is internally limited and the device is protected against over-load and over-temperature conditions. The MP2013 also includes thermal shutdown and current limiting fault protection, and is available in a QFN6 (2mmx2mm) and QFN8 (3mmx3mm) packages.         2.5V to 40V Input Range 3.2µA Quiescent Supply Current Stable With LOW-VALUE Output Ceramic Capacitor (>0.47μF) 150mA Specified Current 620mV Dropout at 150mA Load Available in Fixed and Adjustable Output (1.215V to 15V) Versions Output ±2% Accuracy Specified Current Limit Thermal Shutdown -40°C to +125°C Specified Junction Temperature Range Available in a QFN6 (2mmx2mm) and QFN8 (3mmx3mm) Package APPLICATIONS      Industrial and Automotive Applications Portable and Battery-Powered Equipment Ultra-Low-Power Microcontrollers Cellular Handsets Medical Imaging All MPS parts are lead-free, halogen-free, and adhere to the RoHS directive. For MPS green status, please visit the MPS website under Quality Assurance. “MPS”, the MPS logo, and “Simple, Easy Solutions” are trademarks of Monolithic Power Systems, Inc. or its subsidiaries. TYPICAL APPLICATION Output Adjustable Version MP2013 Rev. 1.1 9/30/2021 Output Fixed Version MonolithicPower.com MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. © 2021 MPS. All Rights Reserved. 1 MP2013 – 40V, 150mA, LOW QUIESCENT CURRENT LINEAR REGULATOR ORDERING INFORMATION Part Number* MP2013GG MP2013GQ MP2013GQ-33 Package QFN6 (2mmx2mm) QFN8 (3mmx3mm) QFN8 (3mmx3mm) Top Marking AX AFF AGG * For Tape & Reel, add suffix -Z (e.g. MP2013GG-Z); PACKAGE REFERENCE IN1 OUT IN2 NC GND FB IN1 OUT IN2 NC NC NC GND FB EXPOSED PAD ON BACKSIDE CONNECT TO GND QFN6 (2mmx2mm) ABSOLUTE MAXIMUM RATINGS (1) IN1, IN2 ....................................... -0.3V to +42V OUT ............................................... -0.3V to +17V FB .................................................. -0.3V to +6V Lead Temperature .................................... 260C Storage Temperature ................-65C to +150C Continuous Power Dissipation (TA = 25°C) (2) QFN8(3x3mm) .......................................... 2.08W QFN6(2x2mm) .......................................... 1.25W ESD Ratings (3) HBM (Human Body Mode) ..........................2kV MM (Machine Mode) ................................ 200V Recommended Operating Conditions (4) Supply Voltage VIN ........................... 2.5V to 40V Output Voltage VOUT .................... 1.215V to 15V Operating Junction Temp. (TJ). -40°C to +125°C MP2013 Rev. 1.1 9/30/2021 QFN8 (3mmx3mm) Thermal Resistance (5) θJA θJC QFN6(2x2mm) ........................ 80 ....... 16 ... C/W QFN8(3x3mm) ........................ 48 ....... 11 ... C/W Notes: 1) Exceeding these ratings may damage the device. 2) The maximum allowable power dissipation is a function of the maximum junction temperature TJ (MAX), the junction-toambient thermal resistance θJA, and the ambient temperature TA. The maximum allowable continuous power dissipation at any ambient temperature is calculated by PD (MAX) = (TJ (MAX)-TA)/θJA. Exceeding the maximum allowable power dissipation will cause excessive die temperature, and the regulator will go into thermal shutdown. Internal thermal shutdown circuitry protects the device from permanent damage. 3) Devices are ESD sensitive. Handling precaution recommended. 4) The device is not guaranteed to function outside of its operating conditions. 5) Measured on JESD51-7, 4-layer PCB. MonolithicPower.com MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. © 2021 MPS. All Rights Reserved. 2 MP2013 – 40V, 150mA, LOW QUIESCENT CURRENT LINEAR REGULATOR ELECTRICAL CHARACTERISTICS VOUT(NOM) = 5V (VIN≥6V) or FB (VIN