MP2014GZD-33-P

MP2014 40V, 500mA, Low Quiescent Current Linear Regulator The Future of Analog IC Technology DESCRIPTION FEATURES The MP2014 is a low power linear regulator that supplies power to systems with high voltage batteries. It includes a wide 3V to 40V input range, low dropout voltage and low quiescent supply current. The low quiescent current and low dropout voltage allow operations at extremely low power levels. Therefore, the MP2014 is ideal for the low power microcontrollers and the battery-powered equipments. • • • The MP2014 provides wide variety of fixed output voltage options (if request): 1.8V, 1.9V, 2.3V, 2.5V, 3.0V, 3.3V, 3.45V, 5.0V. The regulator output current is internally limited and the device is protected against short-circuit, over-load and over-temperature conditions. The MP2014 also includes thermal shutdown and current limiting fault protection, and is available in TO252-5 package. • • • • • • • • • 3V to 40V Input Range 10µA Quiescent Supply Current Stable with Low-Value Output Ceramic Capacitor (>0.47μF) 500mA Specified Current Fixed Output Voltage Output ±2% Accuracy Specified Current Limit Power Good Programmable Power Good Delay Thermal Shutdown and Short-Circuit Protection -40°C to +150°C Specified Junction Temperature Range Available in TO252-5 Package APPLICATIONS • • • • • Industrial/Automotive Applications Portable/Battery-Powered Equipment Ultra Low Power Microcontrollers Cellular Handsets Medical Imaging All MPS parts are lead-free, halogen-free, and adhere to the RoHS directive. For MPS green status, please visit the MPS website under Quality Assurance. “MPS” and “The Future of Analog IC Technology” are registered trademarks of Monolithic Power Systems, Inc. TYPICAL APPLICATION MP2014 Rev. 1.01 1/15/2016 www.MonolithicPower.com MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. © 2016 MPS. All Rights Reserved. 1 MP2014 - 40V, 500mA, LOW QUIESCENT CURRENT LINEAR REGULATOR ORDERING INFORMATION Part Number* Package Top Marking MP2014GZD TO252-5 See Below MP2014GZD-33 TO252-5 See Below * For Tape & Reel, add suffix –Z (e.g. MP2014GZD–Z) TOP MARKING (MP2014GZD) MPS: MPS Prefix YY: Year Code WW: Week Code MP2014: Product Code of MP2014GZD LLLLLLLLL: Lot Number TOP MARKING (MP2014GZD-33) MPS: MPS Prefix YY: Year Code WW: Week Code MP2014-33: Product Code of MP2014GZD-33 LLLLLLLLL: Lot Number PACKAGE REFERENCE TOP VIEW 5 OUT 4 PGDL 3 GND 2 PG 1 IN EXPOSED PAD ON BACKSIDE CONNECT TO GND TO252-5 MP2014 Rev. 1.01 1/15/2016 www.MonolithicPower.com MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. © 2016 MPS. All Rights Reserved. 2 MP2014 - 40V, 500mA, LOW QUIESCENT CURRENT LINEAR REGULATOR ABSOLUTE MAXIMUM RATINGS (1) Thermal Resistance IN ...............................................-0.3V to +42V OUT ..............................................-0.3V to +17V PG ................................................-0.3V to +15V PGDL ..............................................-0.3V to +6V Lead Temperature ....................................260°C Storage Temperature............... -65°C to +150°C (2) Continuous Power Dissipation (TA = +25°C) TO252-5................................................... 2.27W TO252-5 ................................. 55 ....... 3.... °C/W ESD SUSCEPTIBILITY (3) HBM (Human Body Mode) ..........................4kV MM (Machine Mode) ................................ 200V Recommended Operating Conditions (4) Supply Voltage VIN ..............................3V to 40V Operating Temperature ..... TA=-40°C to +125°C TA≤TJ≤ +150°C MP2014 Rev. 1.01 1/15/2016 (5) θJA θJC Notes: 1) Exceeding these ratings may damage the device. 2) The maximum allowable power dissipation is a function of the maximum junction temperature TJ (MAX), the junction-toambient thermal resistance θJA, and the ambient temperature TA. The maximum allowable continuous power dissipation at any ambient temperature is calculated by PD (MAX) = (TJ (MAX)-TA)/θJA. Exceeding the maximum allowable power dissipation will cause excessive die temperature, and the regulator will go into thermal shutdown. Internal thermal shutdown circuitry protects the device from permanent damage. 3) Devices are ESD sensitive. Handling precaution recommended. 4) The device is not guaranteed to function outside of its operating conditions. 5) Measured on JESD51-7, 4-layer PCB. www.MonolithicPower.com MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. © 2016 MPS. All Rights Reserved. 3 MP2014 - 40V, 500mA, LOW QUIESCENT CURRENT LINEAR REGULATOR ELECTRICAL CHARACTERISTICS VIN =13.5V, TJ = +25°C, unless otherwise noted. Parameter Symbol Condition GND Pin Current IGND Load Current Limit ILIMIT Output Voltage accuracy Dropout Voltage(6) VDROPOUT Min 0