MP2131
High Efficiency, 4 A, 5.5 V, 1.2 MHz
Synchronous Step-Down Converter
The Future of Analog IC Technology
DESCRIPTION
FEATURES
The MP2131 is a monolithic step-down, switchmode converter with built-in internal power
MOSFETs. It achieves a 4 A continuous output
current from a 2.7 V to 5.5 V input voltage with
excellent load and line regulation. The MP2131
is ideal for powering portable equipment that
run from a single cell lithium-ion (Li+) battery.
The output voltage is regulated as low as 0.6 V.
The constant-on-time (COT) control scheme
provides fast transient response, high light-load
efficiency, and eases loop stabilization.
Fault
condition
protection
includes
cycle-by-cycle current limit and thermal
shutdown.
The MP2131 requires a minimum number of
readily
available,
standard,
external
components and is available in an ultra-small
QFN-12 (2mm x 2mm) package.
The MP2131 is ideal for a wide range of
applications including portable instruments,
small handheld and battery–powered devices,
PDAs, and DVD drives.
Wide 2.7 V to 5.5 V Operating Input Range
Output Voltage as Low as 0.6 V
4 A Output Current
35 mΩ and 18 mΩ Internal Power MOSFET
Above 96% Peak Efficiency
Above 80% Light Load Efficiency
Low IQ: 19 μA
1.2 MHz Frequency
100% Duty Cycle in Dropout
0.5 ms Internal Soft-Start Time
EN and Power Good for Power Sequencing
Auto Discharge at EN Off
Short-Circuit Protection with Hiccup Mode
Available in a QFN-12 (2mm x 2mm)
Package
APPLICATIONS
Storage Drives
Portable/Handheld Devices
Wireless/Networking Cards
Low Voltage I/O System Power
All MPS parts are lead-free, halogen-free, and adhere to the RoHS directive. For
MPS green status, please visit the MPS website under Quality Assurance.
“MPS” and “The Future of Analog IC Technology” are registered trademarks of
Monolithic Power Systems, Inc.
TYPICAL APPLICATION
MP2131 Rev. 1.1
5/8/2021
www.MonolithicPower.com
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2021 MPS. All Rights Reserved.
1
MP2131 – 4 A, 5.5 V, 1.2 MHZ SYNCHRONOUS STEP-DOWN CONVERTER
ORDERING INFORMATION
Part Number*
MP2131GG
Package
QFN-12 (2mm x 2mm)
Top Marking
See Below
* For Tape & Reel, add suffix –Z (e.g. MP2131GG–Z)
TOP MARKING
CA: Product code of MP2131GG
Y: Year code
LLL: Lot number
PACKAGE REFERENCE
TOP VIEW
VIN
PVIN
1
SW
2
PGND
3
AGND
4
10
11
SW
12
PGND
5
9
PG
8
EN
7
FB
6
OUT
NC
QFN-12 (2mm x 2mm)
MP2131 Rev. 1.1
5/8/2021
www.MonolithicPower.com
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2021 MPS. All Rights Reserved.
2
MP2131 – 4 A, 5.5 V, 1.2 MHZ SYNCHRONOUS STEP-DOWN CONVERTER
ABSOLUTE MAXIMUM RATINGS (1)
Thermal Resistance (4)
Supply voltage (VIN) .................................... 6.5 V
VSW .......................................................................
-0.3 V (-3 V for
很抱歉,暂时无法提供与“MP2131GG-Z”相匹配的价格&库存,您可以联系我们找货
免费人工找货