MP3021DQ-LF-Z

MP023 Primary Side CC/CV Flyback Controller with High Voltage Current Source and Programmable Cable Compensation The Future of Analog IC Technology DESCRIPTION The MP023 is an offline, primary-side controller that provides accurate, constant voltage and constant current regulation without the need of an optocoupler or secondary feedback circuit. It uses an integrated 700V current source to achieve quick start-up. The MP023's variable off-time control allows its flyback converter to operate in discontinuous conduction mode (DCM). The MP023’s current limit and maximum secondary duty cycle are programmable, making the output current easily set. The FB voltage sensing point is also programmable and is able to set different switching frequencies. The internal high-voltage start-up current source and power-saving technologies limit the no-load power consumption to less than 30mW. Full protection features include VCC undervoltage lockout (UVLO), overload protection (OLP), over-temperature protection (OTP), open loop protection (OCkP), and over-voltage protection (OVP). The MP023's variable switching frequency method provides a natural spectrum for shaping a smooth EMI signature, which is suitable for offline, low-power battery chargers and adapters. FEATURES            Primary-Side Control without Optocoupler or Secondary Feedback Circuit Precise Constant Current and Constant Voltage Control (CC/CV) Variable Off-Time Peak Current Control 700V High-Voltage Current Source 20mW No-Load Power Consumption Programmable Cable Compensation Programmable Current Limit and Maximum Secondary Duty Cycle Programmable FB Voltage Sensing Point Multiple Protection Features: OVP, OCkP, OLP, OTP, VCC UVLO Low Cost and Simple External Circuit Available in a SOIC8-7A Package APPLICATIONS    Appliance Power Supplies Adapters for Handheld Electronics Standby and Auxiliary Power Supplies All MPS parts are lead-free, halogen-free, and adhere to the RoHS directive. For MPS green status, please visit the MPS website under Quality Assurance. “MPS” and “The Future of Analog IC Technology” are registered trademarks of Monolithic Power Systems, Inc. The MP023 requires a minimal number of readily available, standard, external components and is available in a SOIC8-7A package. MP023 Rev. 1.1 7/18/2016 www.MonolithicPower.com MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. © 2016 MPS. All Rights Reserved. 1 MP023 – PRIMARY-SIDE CC/CV CONTROLLER TYPICAL APPLICATION MP023 Rev. 1.1 7/18/2016 www.MonolithicPower.com MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. © 2016 MPS. All Rights Reserved. 2 MP023 – PRIMARY-SIDE CC/CV CONTROLLER ORDERING INFORMATION Part Number* MP023GS Package SOIC8-7A Top Marking See Below * For Tape & Reel, add suffix –Z (e.g. MP023GS–Z) TOP MARKING MP023: first five digits of the part number; LLLLLLLL: lot number; MPS: MPS prefix: Y: year code; WW: week code: PACKAGE REFERENCE SOIC8-7A MP023 Rev. 1.1 7/18/2016 www.MonolithicPower.com MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. © 2016 MPS. All Rights Reserved. 3 MP023 – PRIMARY-SIDE CC/CV CONTROLLER ABSOLUTE MAXIMUM RATINGS (1) HV to GND....................................-0.3V to 700V VCC to GND…………………..…….-0.3V to 28V DRV to GND....................................-0.3V to 15V CP, CS to GND……………………....-0.3V to 7V FB……………………………………...-0.7V to 7V (2) Maximum power dissipation ….…………1.3W Junction temperature……….……………..150°C Lead temperature………….………………260°C Storage temperature……….….-60°C to +150°C ESD capability human body mode…..……2.0kV ESD capability machine mode……….…….200V Recommended Operating Conditions (3) Thermal Resistance (4) θJA θJC SOIC8-7A………………………96 ...... 45... °C/W NOTES: 1) Exceeding these ratings may damage the device. 2) The maximum allowable power dissipation is a function of the maximum junction temperature TJ (MAX), the junction-toambient thermal resistance θJA, and the ambient temperature TA. The maximum allowable continuous power dissipation at any ambient temperature is calculated by PD (MAX) = (TJ (MAX)-TA)/θJA. Exceeding the maximum allowable power dissipation produces an excessive die temperature, causing the regulator to go into thermal shutdown. Internal thermal shutdown circuitry protects the device from permanent damage. 3) The device is not guaranteed to function outside of its operating conditions. 4) Measured on JESD51-7, 4-layer PCB. Junction temp. (TJ)……………...-40°C to +125°C Operating VCC range……..…………10V to 25V MP023 Rev. 1.1 7/18/2016 www.MonolithicPower.com MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. © 2016 MPS. All Rights Reserved. 4 MP023 – PRIMARY-SIDE CC/CV CONTROLLER ELECTRICAL CHARACTERISTICS VCC = 15V, TJ = -40℃~125℃, unless otherwise noted. Parameter Symbol Condition Supply Voltage Management (VCC Pin) VCC ON threshold VCCH VCC OFF threshold VCCL Operating current IOP High Voltage Current Source (HV Pin) Break-down voltage VBRDSS Supply current from HV pin Leakage current from HV pin Ileak Driving (Drv Pin) Driver voltage high level VHigh Driver voltage clamp level VClamp Driver voltage low level VLow Driver voltage rise time tR Driver voltage fall time tF Maximum ON time tONmax Minimum switching frequency fS-min Current Sense (CS Pin) VLimit-Max Current limit VLimit-Min fs to start the current fold back fS-H fs to end the current fold back fS-L Propagation delay to Drv tPD Leading edge blanking tLEB Feedback input (FB Pin) FB pin input current FB reference voltage OLP threshold at sampled FB(5) OLP counter(1) FB sampling duration FB maximum sampling time MP023 Rev. 1.1 7/18/2016 IFB Typ Max Units 18.8 8.2 19.4 8.7 245 1 20.0 9.2 300 1.3 V V μA mA 2.6 10 V mA µA fS-min, CL=1nF fs = 40kHz, CL=1nF 700 1.8 2.2 CL=1nF VCC=9.5V CL=1nF, VCC=24V CL=1nF, VCC=24V CL=1nF CL=1nF VCS=0V 7.2 12 7.8 13.4 fS >= fS-H fS