MP3309C
2.7V-5.5V Input, 38V Output,
FSW Programmable, White LED Driver
with I2C Interface
DESCRIPTION
FEATURES
The MP3309C is a WLED step-up converter for
2.7V to 5.5V input that uses peak current mode
to regulate the LED current sensed through an
external low-side resistor. The 200mV feedback
voltage and synchronous rectification reduces
power loss and reduces PCB space
requirements. For non-synchronous mode,
setting an internal register can disable the
rectifier MOSFET to save driver losses.
•
•
•
•
•
•
•
•
The MP3309C features a programmable
switching frequency to optimize efficiency. It
supports both analog and PWM dimming.
•
•
•
In addition, the MP3309C has LED open
protection,
cycle-by-cycle
current
limit
protection, thermal shutdown protection, and
VOUT to GND short-circuit protection. The I2C
interface can set the protection indication bits
and over-voltage protection point.
2.7V to 5.5V Input Voltage
Analog and PWM Dimming
Selectable Synchronous or Nonsynchronous Mode
400kHz I2C-Compatible Interface
Digitally Set LED Current
Programmable Switching Frequency
Programmable Open Load Protection Point
Low 200mV Feedback Voltage with ±1%
Accuracy at Room Temperature
Software Enable Function
UVLO, Thermal Shutdown
Available in a 1.4mmx1.8mm QFN10
Package
APPLICATIONS
•
•
•
Feature Phones and Smart Phones
Tablets
