MP8200DT-LF-P

MP8200 1.0V Precision Shunt Voltage Regulator R EC R NE O EF W M ER D ME E N TO SI D ED G M N P8 S FO 20 R 1 The Future of Analog IC Technology DESCRIPTION FEATURES The MP8200 is a low voltage (1.0V), precision shunt regulator. It is offered in both fixed versions. It can operate from 1V to 12V, giving designers outstanding flexibility in the development of power supplies and instrumentation. The operating current of 100uA makes the part well suited for battery-powered portable electronic applications. The 8200 regulates the output voltage from as low as 1V. The part has a sharp turn-on characteristic and a dynamic resistance of less than 0.5Ω. • • • • • • • Wide Input Voltage Range (1V to 12V) Operating Current From 100µA to 10mA Ultra compact SOT23-3 Package Initial Accuracy: ±1% Low Dynamic Output Resistance of 0.5Ω Stable With No External Capacitor Temperature Range: –40°C to +85°C APPLICATIONS • • • • • • • The MP8200 is offered in a surface mounted 3-pin SOT23 package. Different voltage tolerance ±1%. Adjustable and Programmable Supplies Instrumentation Linear Regulators Notebook Computers Medical Electronics 3V/ 5V 8-/12 Bit Data Converters Battery-Powered Equipments “MPS” and “The Future of Analog IC Technology” are Registered Trademarks of Monolithic Power Systems, Inc. N O T TYPICAL APPLICATION VCC RBIAS VOUT 1.0V MP8200 MP8200 Rev. 0.9 9/30/2009 www.MonolithicPower.com MPS Proprietary Information. Unauthorized Photocopy and Duplication Prohibited. © 2009 MPS. All Rights Reserved. 1 MP8200 – LOW VOLTAGE, 1V PRECISION SHUNT VOLTAGE REGULATOR ORDERING INFORMATION Package SOT23-3 Top Marking Temperature IS3YW –40°C to +85°C R EC R NE O EF W M ER D ME E N TO SI D ED G M N P8 S FO 20 R 1 Part Number* MP8200DT * For Tape & Reel, add suffix –Z (eg. MP8200DT–Z). For RoHS compliant packaging, add suffix –LF (eg. MP8200DT–LF–Z) PACKAGE REFERENCE TOP VIEW V+ 1 3 V- 2 ABSOLUTE MAXIMUM RATINGS (1) Reverse Current ....................................... 25mA Forward Current........................................ 20mA Continuous Power Dissipation (TA = +25°C) (2) ……………………………………………....0.52W Junction Temperature ...............................150°C Lead Temperature ....................................260°C Storage Temperature ............. –65°C to +150°C Recommended Operating Conditions (3) N O T Input Voltage.......................................1V to 12V Output Voltage ............................................ 1.0V Operating Temperature............. –40°C to +85°C MP8200 Rev. 0.9 9/30/2009 TRIM Thermal Resistance (4) θJA θJC SOT23-3 ................................ 240 .... 110.. °C/W Notes: 1) Exceeding these ratings may damage the device. 2) The maximum allowable power dissipation is a function of the maximum junction temperature TJ (MAX), the junction-toambient thermal resistance θJA, and the ambient temperature TA. The maximum allowable continuous power dissipation at any ambient temperature is calculated by PD (MAX) = (TJ (MAX)-TA)/θJA. Exceeding the maximum allowable power dissipation will cause excessive die temperature, and the regulator will go into thermal shutdown. Internal thermal shutdown circuitry protects the device from permanent damage. 3) The device is not guaranteed to function outside of its operating conditions. 4) Measured on approximately 1” square of 1 oz copper. www.MonolithicPower.com MPS Proprietary Information. Unauthorized Photocopy and Duplication Prohibited. © 2009 MPS. All Rights Reserved. 2 MP8200 – LOW VOLTAGE, 1V PRECISION SHUNT VOLTAGE REGULATOR ELECTRICAL CHARACTERISTICS R EC R NE O EF W M ER D ME E N TO SI D ED G M N P8 S FO 20 R 1 IIN = 100µA to 10mA, TA = +25°C, unless otherwise noted. Parameter Output Voltage (5) Symbol VO VOERR Initial Accuracy Temperature Coefficient A Grade Output Voltage Change vs. Input Voltage Dynamic Output Impedance Minimum Operating Current Voltage Noise Turn-On Settling Time Condition Min 0.990 –10 –1 Typ 1.0000 TCVO -40°C < TA < +85°C –40°C to +85°C 45 ∆VR IIN = 0.1mA to 10mA 4 (∆VR/∆IR) IIN = 2mA ± 100µA IIN 0°C < TA < +70°C f = 0.1Hz to 10Hz tR Within 0.1% of Output Max 1.010 +10 +1 85 0.5 100 4 10 5 Units V mV % ppm/°C mV Ω µA µV p-p µs Notes: 5) The forward diode voltage characteristic at –1mA is typically 0.65V. PIN FUNCTIONS Name V+ V– TRIM Description Cathode Anode No Connect N O T Pin # 1 2 3 MP8200 Rev. 0.9 9/30/2009 www.MonolithicPower.com MPS Proprietary Information. Unauthorized Photocopy and Duplication Prohibited. © 2009 MPS. All Rights Reserved. 3 MP8200 – LOW VOLTAGE, 1V PRECISION SHUNT VOLTAGE REGULATOR TYPICAL PERFORMANCE CHARACTERISTICS R EC R NE O EF W M ER D ME E N TO SI D ED G M N P8 S FO 20 R 1 VIN = 5V, VOUT = 1V, TA = +25ºC, unless otherwise noted. VOUT vs. IIN 1.010 1010 1.008 IIN=10mA 1000 IIN=0.1mA 990 980 IIN vs. VOUT 100000 IIN=20mA INPUT CURRENT (mA) 1020 OUTPUT VOLTAGE (V) INPUT VOLTAGE (mV) VOUT vs. Temperature IIN=10mA 1.006 IIN=5mA 1.004 IIN=1mA IIN=0.1mA 1.002 10000 -50 -10 30 70 110 150 1 T Turn On With Load Capacitor 100 10 1.000 970 1000 3 5 7 9 INPUT VOLTAGE (V) 0.9 11 Turn Off With Load Capacitor 0.94 0.98 1.02 1.06 OUTPUT VOLTAGE (V) 1.10 Line Transient VIN=3V to 6V, IIN=0.5mA to 1mA VIN 2V/div VIN 2V/div VOUT 1V/div VOUT 1V/div VIN 2V/div VOUT 0.1V/div Turn On Time T VIN=1.3V, IIN=0.5mA N O VIN 1V/div VOUT 0.5V/div MP8200 Rev. 0.9 9/30/2009 www.MonolithicPower.com MPS Proprietary Information. Unauthorized Photocopy and Duplication Prohibited. © 2009 MPS. All Rights Reserved. 4 MP8200 – LOW VOLTAGE, 1V PRECISION SHUNT VOLTAGE REGULATOR R EC R NE O EF W M ER D ME E N TO SI D ED G M N P8 S FO 20 R 1 FUNCTION BLOCK DIAGRAM V+ R1 - + TRIM VREF R2 V- N O T Figure 1—Functional Block Diagram MP8200 Rev. 0.9 9/30/2009 www.MonolithicPower.com MPS Proprietary Information. Unauthorized Photocopy and Duplication Prohibited. © 2009 MPS. All Rights Reserved. 5 MP8200 – LOW VOLTAGE, 1V PRECISION SHUNT VOLTAGE REGULATOR APPLICATION INFORMATION The load and supply voltages can vary, so RBIAS should be chosen such that is it small enough to supply the minimum current to the MP8200 when the supply voltage is at its minimum and the load current is at its maximum. In addition, RBIAS needs to be large enough that the quiescent current does not exceed 10mA when the supply voltage is at its maximum and the load current is at its minimum. Choose RBIAS using the following equation: R BIAS = VSUPPLY − VOUT IL + I Q Adjustable Precision Voltage Source The MP8200 can be combined with a precision op amp to produce a precise adjustable output voltage. See Figure 1. The output of the op amp is determined by the gain of the circuit using the following equation: VOUT = 1 + R1 R2 VCC T O RBIAS VOUT MP8200 Figure 2—Output Voltage Trim Precise Negative Voltage Reference The MP8200 can be configured for use in applications where a precise negative voltage reference is needed. + MP8200 - -1.0V -VDD Figure 3—Precise –1.0V Reference Choose R1 such that 100µA to 10mA is provided to properly bias the MP8200, using the equation: RBIAS 1.0V VCC R1 An optional capacitor can be added in parallel with R2 to filter out high frequency noise. N Output Voltage Trim Using a mechanical or digital potentiometer, the output voltage of the MP8200 can be trimmed to ±0.5%. See Figure 2. Note that trimming other resistor values may not produce an accurate output from the MP8200. R EC R NE O EF W M ER D ME E N TO SI D ED G M N P8 S FO 20 R 1 External Bias Resistor In the case of shunt voltage references, an external bias resistor (RBIAS) is required between the supply voltage and the MP8200. RBIAS sets the current that is required to pass through the load and the IC. + MP8200 VOUT -- R1 = VDD I MP8200 R1 R2 C2 (Opt.) Figure 1—Adjustable Precision Voltage Source MP8200 Rev. 0.9 9/30/2009 www.MonolithicPower.com MPS Proprietary Information. Unauthorized Photocopy and Duplication Prohibited. © 2009 MPS. All Rights Reserved. 6 MP8200 – LOW VOLTAGE, 1V PRECISION SHUNT VOLTAGE REGULATOR PACKAGE INFORMATION N O T R EC R NE O EF W M ER D ME E N TO SI D ED G M N P8 S FO 20 R 1 SOT23-3 NOTICE: The information in this document is subject to change without notice. Users should warrant and guarantee that third party Intellectual Property rights are not infringed upon when integrating MPS products into any application. MPS will not assume any legal responsibility for any said applications. MP8200 Rev. 0.9 9/30/2009 www.MonolithicPower.com MPS Proprietary Information. Unauthorized Photocopy and Duplication Prohibited. © 2009 MPS. All Rights Reserved. 7