MP86961DU-LF-P

TM MP86961 20A, 27V Intelli-Phase Solution (Integrated HS/LS FETs and Driver) in a 5x5mm QFN The Future of Analog IC Technology DESCRIPTION FEATURES The MP86961 is a monolithic Half Bridge with built-in internal power MOSFETs and gate driver. It achieves 20A continuous output current over a wide input supply range. • • • • • • • • Integrating the Driver and MOSFETs results in high efficiency due to optimal dead time control and parasitic inductance reduction. The MP86961 is a Monolithic IC designed to drive up to 20A per phase. Housed in a very small 5x5mm QFN Packge, this device can be operated from 100kHz to 1MHz. Wide 4.5V to 21V Operating Input Range 20A Output Current Simple Logic Interface(5.0V) Operate from 100kHz to 1MHz Accepts 3-state PWM Input Suitable for single-/multi-phase operation Available in a 5mm x 5mm QFN Package ROHS6 Compliant APPLICATIONS • • • The IC is intended to work with 5V tri-state output controllers. Power modules Notebook, Core Voltage Graphic Card Core Regulators All MPS parts are lead-free and adhere to the RoHS directive. For MPS green status, please visit MPS website under Quality Assurance. “MPS” and “The Future of Analog IC Technology” are Registered Trademarks of Monolithic Power Systems, Inc. The MP86961 is ideal for notebook applications where efficiency and small size are a premium. This Product is Patent Pending. TYPICAL APPLICATION VIN 4.5V-21V 100 CIN 95 9 ON/OFF 4 EN PG BST MP86961 6 PWM SW VCC 5 SYNC GND AGND 3 VCC 5V 90 7 8 C6 100nF 2 10-18 VOUT L Cs 1μF 16V 0.8V to 1.2V @ 20A COUT EFFICIENCY (%) IN 85 80 75 70 65 VIN=12V VOUT=1.2V 60 55 50 0 2 4 6 8 10 12 14 16 18 20 OUTPUT CURRENT (A) MP86961 Rev. 1.22 www.MonolithicPower.com 12/26/2013 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. © 2013 MPS. All Rights Reserved. 1 MP86961 –20A, 27V INTELLI-PHASE SOLUTION INTEGRATED HS/LS FETS AND DRIVER IN A 5X5mm QFN ORDERING INFORMATION Part Number* Package Top Marking Free Air Temperature(TA) MP86961DU 5x5 QFN 86961DU -40°C to +85°C * For Tape & Reel, add suffix –Z (e.g. MP86961DU–Z); For RoHS compliant packaging, add suffix –LF (e.g. MP86961DU–LF–Z) PACKAGE REFERENCE PIN 1 ID N/C 1 VCC 2 AGND 3 EN 4 SYNC 5 PWM 6 PG 7 BST 8 IN 9 IN GND SW IN GND SW IN GND SW GND IN SW 18 GND 17 GND 16 GND 15 GND 14 GND 13 GND 12 GND 11 GND 10 GND EXPOSED PAD CONNECT TO PIN (4) ABSOLUTE MAXIMUM RATINGS (1) Thermal Resistance Supply Voltage VIN ....................................... 27V VSW………………………………………..-0.3V (-3V for