MPL-AL5050-100

MPL-AL5050-100 Low-Resistance Molded Inductor 10µH APPLICATIONS Battery-powered devices  Embedded computing  High-current SMPS  High-frequency SMPS  POL converters  FPGA ELECTRICAL CHARACTERISTICS FEATURES           Parameter Size 5.5mmx5.3mmx4.8mm Low DCR Low AC Losses Low Audible Noise Molded Construction Soft Saturation Stable Over High Temperatures Max Operating Temp +155°C RoHS/REACH-Compliant, Halogen-Free Inductance (1) L ±20% Value Unit 10 µH Resistance RDC typ 37 mΩ Resistance MAX RDC MAX max 43.5 mΩ IR typ 4.8 A ISAT 25°C typ 5.5 A ISAT 100°C typ 5.5 A fr typ 12 MHz Rated Current (2) Saturation Current 25°C (3) Saturation Current 100°C Resonance Frequency (4) GENERAL SPECIFICATIONS (1) Inductance Measured at 100kHz, 100mA (2) Rated Current Rated current will cause the coil temperature rise ΔT of 40K IR measured with the inductor soldered in a single-layer PCB. Copper layer thickness 35µm Cu / PCB size 30x50mm. Temperature behavior dependent on circuit design, PCB layout, proximity to other components, and trace dimensions and thickness. (3) Saturation Current 25°C Saturation current will cause L to drop from 30% at 25°C ambient temperature (4) Saturation Current 100°C Saturation current will cause L to drop from 30% at 100°C ambient temperature Temperature Test Condition Operating Condition Storage Condition Electrical specifications measured at 25°C, 35% RH if not given differently Operating temperature: -40°C to +155°C (including temp rise) Should not exceed +155°C under worst-case operation conditions Tape and Reel packaging: -10°C to +40°C Humidity: