MPL-AT2512-6R8

MPL-AT2512-6R8 Low-Profile Molded Inductor 6.8µH APPLICATIONS Battery-powered devices  High switching frequency SMPS  IoT  Wearable  Portable devices  Input filters ELECTRICAL CHARACTERISTICS FEATURES           Size 2.5mmx2.0mmx1.2mm Low Profile Low Audible Noise Molded Construction Soft Saturation Stable Over High Temperatures Low DCR Max Operating Temp +125°C RoHS/REACH-Compliant, Halogen-Free Parameter Inductance (1) L Value Unit ±20% 6.8 µH Resistance RDC typ 280 mΩ Resistance MAX RDC MAX max 325 mΩ IR typ 1.4 A ISAT 25°C typ 2.2 A ISAT 100°C typ 2.2 A fr typ 21 MHz Rated Current (2) Saturation Current 25°C (3) Saturation Current 100°C (4) Resonance Frequency GENERAL SPECIFICATIONS (1) Inductance Measured at 100kHz, 100mA (2) Rated Current Rated current will cause the coil temperature rise ΔT of 40K IR measured with the inductor soldered in a single-layer PCB. Copper layer thickness 35µm Cu / PCB size 30x50mm. Temperature behavior dependent on circuit design, PCB layout, proximity to other components, and trace dimensions and thickness. (3) Saturation Current 25°C Saturation current will cause L to drop from 30% at 25°C ambient temperature (4) Saturation Current 100°C Temperature Test Condition Operating Condition Storage Condition Saturation current will cause L to drop from 30% at 100°C ambient temperature Electrical specifications measured at 25°C, 35% RH if not given differently Operating temperature: -40°C to +125°C (including temp rise) Should not exceed +125°C under worst-case operation conditions Tape and Reel packaging: -10°C to +40°C Humidity: