MPM3811GG-P

MPM3811 2.3V - 5.5V Input, 1A Power Module in Small 2x2x1.6mm QFN Package DESCRIPTION FEATURES The MPM3811 is a monolithic, step-down, switch-mode converter with built-in, internal power MOSFETs and an inductor. The MPM3811 achieves 1A of continuous output current from a 2.3V to 5.5V input voltage with excellent load and line regulation. The MPM3811 is ideal for a wide range of applications, including high performance DSPs, wireless power, portable and mobile devices, and other lowpower systems. The output voltage can be regulated as low as 0.6V. Only input capacitors, output capacitors, and feedback (FB) resistors are needed to complete the design.         The constant-on-time (COT) control scheme provides fast transient response, high light-load efficiency, and easy loop stabilization.   Full protection features include cycle-by-cycle current limiting and thermal shutdown.  The MPM3811 requires a minimal number of readily available, standard, external components and is available in an ultra-small QFN-10 (2mmx2mmx1.6mm) package. APPLICATIONS          Up to 91% Peak Efficiency Wide 2.3V to 5.5V Operating Input Range Output Voltage as Low as 0.6V 100% Duty Cycle in Dropout 1A Output Current 2.2MHz Frequency EN for Power Sequencing Cycle-by-Cycle Over-Current Protection (OCP) 0.5ms Internal Soft-Start (SS) Time Output Discharge Short-Circuit Protection (SCP) with Hiccup Mode Thermal Shutdown Stable with Low ESR Output Ceramic Capacitors Available in a QFN10 (2mmx2mmx1.6mm) Package Optical Modules IoT Devices Handheld Printers/POS Portable Devices Low Voltage I/O System Power Space-Constraint Systems All MPS parts are lead-free, halogen-free, and adhere to the RoHS directive. For MPS green status, please visit the MPS website under Quality Assurance. “MPS”, the MPS logo, and “Simple, Easy Solutions” are trademarks of Monolithic Power Systems, Inc. or its subsidiaries. TYPICAL APPLICATION Efficiency vs. Output Current VIN 2.3V to 5.5V VOUT 1.2V/1A VIN MPM3811GG EN FB EN GND MPM3811 Rev.1.0 8/31/2018 R1 82 kΩ R2 82 kΩ C2 22µF EFFICIENCY(%) C1 10µF OUT 100 90 80 70 60 50 40 30 20 10 0 0.001 Vin=2.3V,Vo=1.2V Vin=3.6V,Vo=1.2V Vin=5V,Vo=1.2V Vin=5V,Vo=3.3V 0.01 0.1 1 OUTPUT CURRENT(A) www.MonolithicPower.com MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. © 2018 MPS. All Rights Reserved. 10 1 MPM3811 – 5.5V INPUT, 1A, POWER MODULE IN QFN (2x2x1.6) PACKAGE ORDERING INFORMATION Part Number MPM3811GG Package QFN-10 (2mmx2mmx1.6mm) Top Marking See Below * For Tape & Reel, add suffix –Z (e.g.: MPM3811GG–Z). TOP MARKING FP: Product code of MPM3811GG Y: Year code LLL: Lot number PACKAGE REFERENCE TOP VIEW GND 10 VIN 1 9 FB SW 2 8 OUT SW 3 7 OUT SW 4 6 OUT 5 EN QFN-10 (2mmx2mmx1.6mm) MPM3811 Rev.1.0 8/31/2018 www.MonolithicPower.com MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. © 2018 MPS. All Rights Reserved. 2 MPM3811 – 5.5V INPUT, 1A, POWER MODULE IN QFN (2x2x1.6) PACKAGE PIN FUNCTIONS Pin # Name 1 VIN 2-4 SW 5 EN 6-8 OUT 9 FB 10 GND Description Supply voltage. The MPM3811 operates from a +2.3V to +5.5V unregulated input range. A decoupling capacitor is needed to prevent large voltage spikes from appearing at the input. Output switching node. SW is the drain of the internal, high-side, P-channel MOSFET. SW is not for testing and is for internal use only. On/off control. Output voltage power rail and input sense pin for output voltage. Connect the load to OUT. An output capacitor is needed at OUT to decrease the output voltage ripple. Feedback. An external resistor divider from the output to GND tapped to FB sets the output voltage. Power ground. θJA θJC ABSOLUTE MAXIMUM RATINGS (1) Thermal Resistance Supply voltage (VIN) ....................................... 6V VSW .................................... -0.3V (-5V for VOUT for application. MPM3811 Rev.1.0 8/31/2018 www.MonolithicPower.com MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. © 2018 MPS. All Rights Reserved. 15 MPM3811 – 5.5V INPUT, 1A, POWER MODULE IN QFN (2x2x1.6) PACKAGE PACKAGE OUTLINE DRAWING FOR 10L FCMQFN (2X2MM) PACKAGE INFORMATION MF-PO-D-0XXX revision QFN-10 (2mmx2mmx1.6mm) PIN 1 ID 0.125X45º TYP PIN 1 ID MARKING PIN 1 ID INDEX AREA BOTTOM VIEW TOP VIEW SIDE VIEW 0.125X45º NOTE: 1) ALL DIMENSIONS ARE IN MILLIMETERS. 2) LEAD COPLANARITY SHALL BE 0.10 MILLIMETERS MAX. 3) JEDEC REFERENCE IS MO-220. 4) DRAWING IS NOT TO SCALE. RECOMMENDED LAND PATTERN NOTICE: The information in this document is subject to change without notice. Users should warrant and guarantee that third party Intellectual Property rights are not infringed upon when integrating MPS products into any application. MPS will not assume any legal responsibility for any said applications. MPM3811 Rev.1.0 8/31/2018 www.MonolithicPower.com MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. © 2018 MPS. All Rights Reserved. 16