MPM3822CGRH-P

MPM3822C 2.75 - 6V, 2A, Ultra-Small and Ultra-Low Noise Power Module DESCRIPTION FEATURES The MPM3822C is a synchronous, step-down, power module with an integrated inductor. The MPM3822C achieves 2A of continuous output current from a 2.75V to 6V input voltage range with excellent load and line regulation. The MPM3822C works in forced continuous conduction mode (CCM) and has a voltage ripple less than 10mV with one output capacitor, making it suitable for optical modules, FGPA, ASIC, and other applications requiring low ripple noise. The output voltage can be regulated as low as 0.6V. Only FB resistors, input capacitors, and output capacitors are needed to complete the design.    The constant-on-time control (COT) scheme provides fast transient response, high efficiency, and easy loop stabilization. Full protection features include cycle-by-cycle current limiting and thermal shutdown. The MPM3822C requires a minimal number of readily available, standard, external components and is available in an ultra-small QFN-18 (2.5mmx3.5mmx1.6mm) package.         Wide 2.75V to 6V Operating Input Range Adjustable Output from 0.6V Low Radiated Emissions (EMI) Complies with EN55022 Class B Standard Up to 2A Continuous Output Current 100% Duty Cycle in Dropout Forced Continuous Conduction Mode (CCM) Enable (EN) and Power Good (PG) for Power Sequencing Cycle-by-Cycle Over-Current Protection (OCP) Short-Circuit Protection (SCP) with Hiccup Mode Only Four External Components Requires Available in a QFN-18 (2.5mmx3.5mmx 1.6mm) Package APPLICATIONS       FPGA, ASIC, DSP Power Optical Modules LDO Replacements Power for Portable Products Storage (SSD/HDD) Space-Limited Applications All MPS parts are lead-free, halogen-free, and adhere to the RoHS directive. For MPS green status, please visit the MPS website under Quality Assurance. “MPS”, the MPS logo, and “Simple, Easy Solutions” are trademarks of Monolithic Power Systems, Inc. or its subsidiaries. TYPICAL APPLICATION Efficiency vs. Output Current VIN = 5V 100 EFFICIENCY (%) 80 60 40 Vout=1.2V Vout=1.8V Vout=2.5V Vout=3.3V 20 0 0 0.5 1 1.5 OUTPUT CURRENT (A) MPM3822C Rev. 1.0 www.MonolithicPower.com 11/30/2018 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. © 2018 MPS. All Rights Reserved. 2 1 MPM3822C – 6V, 2A, ULTRA-SMALL STEP-DOWN MODULE ORDERING INFORMATION Part Number* MPM3822CGRH Package QFN-18 (2.5mmx3.5mmx1.6mm) Top Marking See Below * For Tape & Reel, add suffix –Z (e.g.: MPM3822CGRH–Z). TOP MARKING BFV: Product code of MPM3822CGRH Y: Year code WW: Week code LLL: Lot number PACKAGE REFERENCE TOP VIEW PGND SW 16 15 AGND 1 FB 2 OUT_S 3 17 DNC 14 IN 13 IN 12 PG 18 DNC EN 4 11 NC SW 5 10 OUT SW 6 9 OUT SW 7 8 OUT QFN-18 (2.5mmx3.5mmx1.6mm) MPM3822C Rev. 1.0 www.MonolithicPower.com 11/30/2018 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. © 2018 MPS. All Rights Reserved. 2 MPM3822C – 6V, 2A, ULTRA-SMALL STEP-DOWN MODULE PIN FUNCTIONS Pin # Name Description 1 AGND 2 FB 3 4 5 - 7, 15 8 - 10 11 OUT_S EN SW OUT NC 12 PG 13, 14 16 17,18 IN PGND DNC Analog ground for the internal control circuit. Feedback. Use an external resistor divider from the output to GND tapped to FB to set the output voltage. Output voltage sense. On/off control. Switch output. Power output. No connection. Float NC or connect NC to GND. Power good indicator. The output of PG is an open drain with an internal pull-up resistor to IN. PG is pulled up to IN when the FB voltage is within 10% of the regulation level; otherwise, PG is low. Supply voltage to internal control circuitry. Power ground. No connection. Leave DNC floating. ABSOLUTE MAXIMUM RATINGS (1) VSW .................................... -0.3V (-5V for