MPQ6400
Low Quiescent Current
Programmable-Delay Supervisory Circuit
AEC-Q100 Qualified
The Future of Analog IC Technology
DESCRIPTION
FEATURES
The MPQ6400 family is the microprocessor (µP)
supervisory circuit which can monitor and
provide reset function for system voltages from
0.4V. When either the SENSE voltage falls
below its threshold (VIT) or the voltage of
manual reset (
) is pulled to a logic low, the
signal will be asserted. The reset
voltage can be factory-set for standard voltage
rails from 0.9V to 5V, while the MPQ6400DG01 reset voltage is adjustable with an external
resistor divider. When SENSE voltage and
exceed their thresholds,
is driven to a
logic high after a user-programmable delay time.
R
M
T
E
S
E
R
T
E
S
E
R
The MPQ6400 has a very low quiescent current
of 1.6μA typically, which makes it ideal suitable
for battery-powered applications. It provides a
precision reference to achieve ±1% threshold
accuracy. The reset delay time can be selected
by a capacitor which is connected between
CDELAY and GND, allowing the user to select any
delay time from 2.1ms to 10s. 380ms delay time
is selected by connecting the CDELAY pin to VCC,
while 24ms delay time by leaving the CDELAY pin
float. MPQ6400 is available in 2mm×2mm 6-pin
QFN package.
T
R E
M S
E
R
R
M
Guaranteed Industrial/Automotive Temp
Range Limits
Fixed Threshold Voltages for Standard
Voltage Rails From 0.9V to 5V and
Adjustable Voltage From 0.4V are Available
Low Quiescent Current: 1.6μA Typ
Power-On Reset Generator with Adjustable
Delay Time: 2.1ms to 10s
High Threshold Accuracy: ±1% Typ
Manual Reset (
) Input
Output
Open-Drain
Immune to Short Negative SENSE Voltage
Guaranteed Reset Valid to VCC=0.8V
2×2mm QFN
AEC-Q100 Qualified
APPLICATIONS
Advanced Driver Assistance System (ADAS)
Camera Monitor Systems
Sensor Fusion Systems
Portable/Battery-Powered Products
HEV/EV
MCU/DSP/FPGA/ASIC Applications
All MPS parts are lead-free, halogen-free, and adhere to the RoHS
directive. For MPS green status, please visit the MPS website under
Quality Assurance. “MPS”, the MPS logo, and “Simple, Easy Solutions” are
trademarks of Monolithic Power Systems, Inc. or its subsidiaries.
TYPICAL APPLICATION
VCC
R1
VCC
Microprocessor
SENSE
R3
MPQ6400
C1
Microcontroller
C2
R2
MR
GND
DSP
RESET
CDELAY
C3
RESET
GND
CDELAY
MPQ6400 Rev. 1.12
www.MonolithicPower.com
11/5/2019
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2019 MPS. All Rights Reserved.
1
TM
MPQ6400 -- LOW QUIESCENT CURRENT PROGRAMMABLE-DELAY SUPERVISORY CIRCUIT
ORDERING INFORMATION
Part Number*
Package
TJ
MPQ6400DG-33**
QFN6 (2x2mm)
-40C to +125C
MPQ6400DG-33-AEC1
QFN6 (2x2mm)
-40C to +125C
MPQ6400DG-01
QFN6 (2x2mm)
-40C to +125C
MPQ6400DG-01-AEC1
QFN6 (2x2mm)
-40C to +125C
Top Marking
MSL Rating***
See Below
1
*For Tape & Reel, add suffix –Z (e.g. MPQ6400DG–XX-Z);
For RoHS compliant packaging, add suffix –LF (e.g. MPQ6400DG–XX-LF–Z).
** Check factory for availability in other options.
*** Moisture Sensitivity Level Rating
TOP MARKING
9R: product code of MPQ6400DQ-33/MPQ6400DQ-33-AEC1
Y: year code
LLL: Lot number
TOP MARKING
5B: product code of MPQ6400DQ-01/MPQ6400DQ-01-AEC1
Y: year code
LLL: Lot number
PACKAGE REFERENCE
TOP VIEW
VCC
1
6
RESET
SENSE
2
5
GND
CDELAY
3
4
MR
QFN6 (2 x 2mm)
MPQ6400 Rev. 1.12
www.MonolithicPower.com
11/5/2019
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2019 MPS. All Rights Reserved.
2
TM
MPQ6400 -- LOW QUIESCENT CURRENT PROGRAMMABLE-DELAY SUPERVISORY CIRCUIT
ABSOLUTE MAXIMUM RATINGS (1)
Supply Voltage VCC ........................... -0.3 to 6.0V
CDELAY Voltage VCDELAY ........ -0.3V to VCC + 0.3V
SENSE Voltage VSENSE ......................-0.3V to 6V
All Other Pins ............................... -0.3V to +6.0V
RESET Current IRESET ................................. 5mA
Continuous Power Dissipation (TA = +25°C) (2)
QFN6 (2mmx2mm) ..................................... 2.5W
Junction Temperature ...............................150°C
Lead Temperature .....................................260°C
Storage Temperature ............... -65°C to +150°C
ESD Capability
HBM (Human Body Mode)
CDELAY to VCC ................................. +2kV, -1.8kV
All other pins ..............................................±2kV
CDM (Charged Device Mode) ................. ±750V
Thermal Resistance (4)
θJA
θJC
QFN6 (2x2mm) ....................... 50 ...... 12 ... C/W
Notes:
1) Exceeding these ratings may damage the device.
2) The maximum allowable power dissipation is a function of the
maximum junction temperature TJ(MAX), the junction-toambient thermal resistance θJA, and the ambient temperature
TA. The maximum allowable continuous power dissipation at
any ambient temperature is calculated by PD(MAX)=(TJ(MAX)TA)/θJA. Exceeding the maximum allowable power dissipation
will cause excessive die temperature, and the regulator will go
into thermal shutdown. Internal thermal shutdown circuitry
protects the device from permanent damage.
3) Operating devices at junction temperatures greater than
125°C is possible, please contact MPS for details.
4) The value of θJA given in this table is only valid for comparison
with other packages and cannot be used for design purposes.
These values were calculated in accordance with JESD51-7,
and simulated on a specified JEDEC board. They do not
represent the performance obtained in an actual application.
Recommended Operating Conditions
Supply Voltage VCC .......................... 1.8V to 5.5V
Maximum Junction Temp. (TJ) ........... +125°C(3)
MPQ6400 Rev. 1.12
www.MonolithicPower.com
11/5/2019
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2019 MPS. All Rights Reserved.
3
TM
MPQ6400 -- LOW QUIESCENT CURRENT PROGRAMMABLE-DELAY SUPERVISORY CIRCUIT
ELECTRICAL CHARACTERISTICS
1.8V≤VCC≤5.5V, R3 = 100kΩ, C3 = 47pF, TJ= -40°C to +125°C, Typical values are at Tj=+25°C,
unless otherwise noted.
Parameters
Symbol Condition
VCC
T
E
S
E
R
Low-level Output Voltage
VOL
Units
5.5
V
1.6
5
µA
1.85
15
µA
0.3
V
0.4
V
0.8
V
1
1.7
%
1.5
4
VIT%
A
u
5
1
IR
T
E
S
E
Power-up Reset Voltage(5)
Max
T
E
S
E
ICC
VCC = 3.3V,
not
asserted.
,
,
CDELAY open
VCC = 5.5V,
not
,
,
asserted.
CDELAY open
1.3V ≤ VCC < 1.8V,
IOL = 0.4mA
1.8V ≤ VCC ≤ 5.5V,
IOL = 1.0mA
VOL (max) = 0.2V,
R
R
M
Supply Current
(current into VCC pin)
Typ
1.8
T
E
T S
E E
S R
E
RR
M
Input Supply Range
Min
Trise(Vcc)≥15µs/V
Negative-going
Accuracy (7)
Input
Threshold
VHYS
Input Current at SENSE Pin
ISENSE
110
kΩ
2.4
µA
MPQ6400-01, VSENSE = 6V
nA
2
µA
0.25VCC
V
T
E
S
E
R
T
E
S
E
= 5.5V,
100
not
R R
M M
asserted
VIL
Logic Low Input
VIH
Transient
tw
T
E
S
E
R
td
Delay Time
T
E
S
E
R
R
M
Propagation Delay
tpHL1
T
E
S
E
R
T
E
S
E
R
High to Low Level
SENSE to
MPQ6400-33, VSENSE = 6V
VR
T
E
S
E
R
Leakage Current
to
50
R
M
R
M
Internal Pull-up Resistance
Logic High Input
SENSE
Maximum
Duration
-3
R
Hysteresis on VIT Pin
VIT
Delay,
tpHL2
0.7VCC
VIH = 1.05 VIT,
VIL = 0.95 VIT
CDELAY = Open
CDELAY = VCC(6)
CDELAY = 150pF
CDELAY = 10nF(6)
VIH = 0.7 VCC,
VIL = 0.25 VCC
VIH = 1.05 VIT,
VIL = 0.95 VIT
V
17.5
15
230
1.3
61
24
380
2.1
102
µs
34
530
3
142
ms
ms
ms
ms
160
ns
17.5
µs
T
E
S
E
R
Note:
becomes active.
5) The lowest supply voltage (VCC) at which
6) Not tested in production and guaranteed by design and characterization.
7) VSENSE Falling Slowly
MPQ6400 Rev. 1.12
www.MonolithicPower.com
11/5/2019
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2019 MPS. All Rights Reserved.
4
TM
MPQ6400 -- LOW QUIESCENT CURRENT PROGRAMMABLE-DELAY SUPERVISORY CIRCUIT
ORDERING INFORMATION
Product
MPQ6400DG-33
MPQ6400DG-01
Package
QFN
QFN
Top Marking
9R
5B
Nominal Supply Voltage
3.3V
3.3V
Threshold Voltage (VIT)
3.07V
Adjustable
PIN FUNCTIONS
QFN
Pin #
1
3
Supply voltage. A 0.1uF decoupling ceramic capacitor should be put close to this pin.
SENSE pin is connected to the monitored system voltage. When the monitored voltage is
SENSE
is asserted.
below desired threshold,
CDELAY
The manual reset (
) can introduce another logic signal to control the
internally connected to VCC through a 90kΩ resistor.
Ground.
T
E
S
E
R
GND
Programmable reset delay time pin. When CDELAY connected to VCC through a resistor
between 50kΩ and 200kΩ, a 380ms delay time is selected. When CDELAY floated, the delay
time is 24ms. A capacitor bigger than 150pF connected CDELAY to GND could be used to get
the user’s programmable time from 2.1ms to 10s.
R
M
5
VCC
R
M
4
Description
T
E
S
E
R
2
Name
. It is
T
E
S
E
R
T
E
S
E
R
R
M
T
E
S
E
R
T
E
S
E
R
6
is an open drain signal which will be asserted when the SENSE voltage drops below
) pin drops to a logic low. The
delay
a preset threshold or when the manual reset (
time is programmable from 2.1ms to 10s by using external capacitors. A pull-up resistor
bigger than 10k should be connected this pin to supply line, and the
outputting a
higher voltage than VCC is allowable.
R
M
output remains asserted for a user’s
programmable delay time. Two fixed
delay
times are user-selectable: 380ms delay time by
connecting the CDELAY pin to VCC, and 24ms delay
time by leaving the CDELAY pin float. Any delay
time from 2.1ms to 10s could be gotten by
connecting a capacitor between CDELAY and GND.
The wide monitor voltage and programmable
reset delay time make MPQ6400 product family
suitable for a broad array of applications.
MPQ6400 Rev. 1.12
www.MonolithicPower.com
11/5/2019
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2019 MPS. All Rights Reserved.
T
E
S
E
R
R
M
The MPQ6400 product family asserts a
signal when either the SENSE pin voltage is
lower than VIT or the manual reset ( ) is driven
low. The MPQ6400-XX family, other than the
MPQ6400DG-01, can monitor a fixed voltage from
0.9V to 5.0V. The MPQ6400DG-01 can monitor
any voltage above 0.4V by adjusting the external
resistor divider. After both the manual reset ( )
and SENSE voltages exceed their thresholds, the
T
E
S
E
R
T
E
S
E
R
DETAIL DESCRIPTION
5
TM
MPQ6400 -- LOW QUIESCENT CURRENT PROGRAMMABLE-DELAY SUPERVISORY CIRCUIT
TYPICAL PERFORMANCE CHARACTERISTICS
VCC=3.3V, R3 = 100kΩ, C3 = 47pF, TA= -40°C to +125°C, Typical values are at TA=+25°C, unless
otherwise noted.
Supply Current vs. VCC
Reset Delay Time vs. CDELAY
100
10
100
Maximum SENSE Transient
Duration vs.SENSE Threshold
Overdrive Voltage
9
RESET DELAY TIME(s)
8
7
6
5
4
3
2
10
1
10
0.1
0.01
1
0
1.5
2.5
3.5
4.5
5.5
0.001
0.0001 0.001 0.01
6.5
0.1
1
1
10
0
10
20
30
40
50
60
Reset Delay vs.Temperature
Reset Delay vs.Temperature
(CDELAY=open)
(CDELAY=VCC)
Reset Delay vs.Temperature
(CDELAY=150pF Cap)
500
3
29
480
2.8
28
27
26
VCC=3.3V
24
23
VCC=6V
22
21
Normalized VIT vs.
Temperature
0.2
400
VCC=3.3V
380
VCC=1.8V
340
-40 -20
VCC=1.8V
0
-0.3
VCC=3.3V
-0.5
-0.6
-40 -20 0 20 40 60 80 100 120140
1.6
1.4
VCC=6V
VCC=6V
10
VCC=6V
1
0-40 -20
VCC=3.3V
1.8
12
VCC=1.8V
1.5
0.5
VCC=1.8V
2
14
2
VCC=6V
2.2
IRESET vs. Low Level
Reset Voltage
2.5
-0.1
2.4
1
-40 -20 0 20 40 60 80 100 120140
0 20 40 60 80 100 120 140
VHYS vs. Temperature
3
2.6
1.2
3.5
0.1
-0.4
VCC=6V
420
360
VCC=1.8V
20
-40 -20 0 20 40 60 80 100 120 140
-0.2
440
VCC=3.3V
0 20 40 60 80 100 120 140
IRESET(mA)
25
460
RESET DELAY(ms)
30
RESET DELAY(ms)
RESET DELAY(ms)
V CC(V)
8
VCC=1.8V
6
4
VCC=3.3V
2
00
0.2
0.4
0.6
0.8
1
LOW LEVEL RESET VOLTAGE(V)
MPQ6400 Rev. 1.12
www.MonolithicPower.com
11/5/2019
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2019 MPS. All Rights Reserved.
6
TM
MPQ6400 -- LOW QUIESCENT CURRENT PROGRAMMABLE-DELAY SUPERVISORY CIRCUIT
FUNCTIONAL BLOCK DIAGRAM
VCC
VCC
VCC
90k
VCC
MPQ6400DG-01
Adjustable Voltage
MR
0.4V
SENSE
RESET
MR
SENSE
--
R1
Reset
Logic
Timer
+
MPQ6400DG-XX
90k
RESET
Reset
Logic
Timer
+
R2
0.4V
-CDELAY
CDELAY
GND
GND
Adjustable Voltage Version
Fixed Voltage Version
Figure 1—Functional Block Diagram
TIMING DIAGRAM
VCC
0.8V
0.0V
RESET
tD
tD
tD
SENSE
tD=Reset Delay
=Undefined State
VIT+VHYS
VIT
MR
0.7VCC
0.25VCC
Time
Figure 2—MPQ6400 Timing Diagram
SENSE > VIT
0
1
0
1
T
E
S
E
R
R
M
L
L
H
H
TRUTH TABLE
L
L
L
H
MPQ6400 Rev. 1.12
www.MonolithicPower.com
11/5/2019
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2019 MPS. All Rights Reserved.
7
TM
MPQ6400 -- LOW QUIESCENT CURRENT PROGRAMMABLE-DELAY SUPERVISORY CIRCUIT
APPLICATION INFORMATION
T
E
S
E
R
Reset Output Function
The MPQ6400
output is typically
connected to the
input of a microprocessor,
as shown in Figure 3. When
is not
asserted, a pull up resistor must be connected to
hold this signal high. The voltage of reset signal
is allowed to be higher than VCC (up to 6V)
through a resistor pulling up from supply line. If
the voltage is below 0.8V,
output is
undefined. This condition can be ignored
generally because that most microprocessors do
not function at this state. When both SENSE and
are higher than their threshold voltage,
output holds logic high. Once either of the two
drops below their threshold,
will be
asserted.
T
E
S
E
R
T
E
S
E
R
divider from monitored voltage to GND. Its tap
connects to the SENSE pin. The circuit can be
used to monitor any voltage higher than 0.4V.
VSEN
VCC
VIT = (1+
R1
T
E
S
E
R
T
E
S
E
R
R1
)0.4
R2
SENSE
1nF
R2
GND
Figure 4—MPQ6400DG-01 Monitoring a UserDefined Voltage
Monitor Multiple System Voltages
The manual reset (
) can introduce another
logic signal to control the
. When
is a
logic low (0.25VCC),
will be asserted. After
both SENSE and
are above their thresholds,
will be driven to a logic high after a reset
delay time. The
is internally connected to VCC
through a 90kΩ resistor so this pin can float. See
how multiple system voltages are monitored by
in Figure 5. If the signal on
isn’t up to VCC,
there will be an additional current through internal
90kΩ pull up resistor. A logic-level FET can be
used to minimize the leakage, as shown in Figure
6.
R
M
VCC
RESET
GND CDELAY
RESET
47pF
GND
R
M
MR
T
E
S
E
R
Microcontroller
1nF
T
E
S
E
DSP
100k
RR
M
Microprocessor
SENSE
R2
R
M
T
E
S
E
R
R1
0.1uF
MPQ6400DG-01
RESET
T
E
S
E
R
R
M
VCC
VOUT
R
M
Figure 3—Typical Application of MPQ6400
with Microprocessor
3.3V
1.2V
T
E
S
E
R
From the point that
is again logic high and
SENSE is above VIT + VHYS (the threshold
hysteresis),
will be driven to a logic high
after a reset delay time. The reset delay time is
programmable by CDELAY pin. Due to the finite
impedance of
pin, the pull up resistor
should be bigger than 10kΩ.
R
M
R
M
CDELAY
T
E
S
E
R
MPQ6400DG-12
RESET
CDELAY
GND
SENSE VCC
MPQ6400DG-33
MR
RESET
CDELAY
GND
VI/O
VCORE
DSP
RESET
GND
T
E
S
E
R
Monitor a Voltage
The SENSE input pin is connected to the
monitored system voltage directly or through a
resistor network (on MPQ6400DG-01). When the
voltage on the pin is below VIT,
is asserted.
A threshold hysteresis will prevent the chip from
responding perturbation on SENSE pin. A 1nF to
10nF bypass capacitor should be put on this pin
to increase its immunity to noise. A typical
application of the MPQ6400DG-01 is shown in
Figure 4. Two external resistors form a voltage
SENSE VCC
Figure 5— MPQ6400 Family Monitoring
Multiple System Voltages
MPQ6400 Rev. 1.12
www.MonolithicPower.com
11/5/2019
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2019 MPS. All Rights Reserved.
8
TM
MPQ6400 -- LOW QUIESCENT CURRENT PROGRAMMABLE-DELAY SUPERVISORY CIRCUIT
3.3V
R
M
VCC
The reset delay time is determined by the charge
time of external capacitor. While SENSE is above
VIT and
is a logic high, the internal 140nA
current source is enabled and starts to charge
the capacitor to set the delay time. When the
capacitor voltage rises to 1.13V, the
is deasserted. The capacitor will be discharged when
the
is again asserted. Stray capacitance
may cause errors of the delay time. A ceramic
capacitor with low leakage is strongly
recommended.
SENSE
T
E
S
E
R
MR
RESET
T
E
S
E
R
MPQ6400DG-33
GND
Figure 6—Minimizing ICC When MR Signal isn’t
over VCC by External MOSFET
3.3V
SENSE Voltage Transients Immunity
The MPQ6400 can be immune to SENSE pin
short negative transient. The maximum immune
duration is 17us while overdrive is 5%. A shorter
negative transient can not assert the
output. The effective duration is relative to the
threshold overdrive, as shown in Figure 8.
T
E
S
E
R
Programmable Reset Delay Time
The reset delay time can be programmed by
CDELAY configure. When CDELAY is connected to
VCC through a resistor between 50kΩ and
200kΩ, the delay time is 380ms. When CDELAY
floated, the delay time is 24ms. In addition, a
capacitor connected CDELAY to GND could be
used to get the user’s programmable delay time
from 2.1ms to 10s. The three configures can be
found in Figure 7(a)(b)(c).
100
Maximum SENSE Transient
Duration vs.SENSE Threshold
Overdrive Voltage
3.3V
SENSE
SENSE
VCC
50k
VCC
MPQ6400DG-33
MPQ6400DG-33
RESET
RESET
CDELAY
10
CDELAY
GND
GND
24ms Delay
380ms Delay
(b)
(a)
1
0
10
20
30
40
50
60
3.3V
SENSE
VCC
MPQ6400DG-33
Figure 8—Maximum Transient Duration vs.
Sense Threshold Overdrive Voltage
RESET
CDELAY
CDELAY
GND
(c)
Figure 7—Programmable Configurations to
the Reset Delay Time
The external capacitor CDELAY must be larger than
150pF. For a given delay time, the capacitor
value can be calculated using the following
equation:
C DELAY (nF) [t D (s) 4.99 10 4 (s)] 107
MPQ6400 Rev. 1.12
www.MonolithicPower.com
11/5/2019
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2019 MPS. All Rights Reserved.
9
MPQ6400 – LOW QUIESCENT CURRENT PROGRAMMABLE-DELAY SUPERVISORY CIRCUIT
PACKAGE INFORMATION
QFN6 (2 x 2mm)
PIN 1 ID
MARKING
1.90
2.10
0.30
0.40
0.20
0.30
1.90
2.10
PIN 1 ID
INDEX AREA
0.65
0.85
PIN 1 ID
SEE DETAIL A
1
6
1.25
1.45
0.65
BSC
3
4
TOP VIEW
BOTTOM VIEW
0.80
1.00
0.20 REF
PIN 1 ID OPTION A
0.30x45º TYP.
PIN 1 ID OPTION B
R0.20 TYP.
0.00
0.05
SIDE VIEW
DETAIL A
NOTE:
1.90
0.70
0.70
1) ALL DIMENSIONS ARE IN MILLIMETERS.
2) EXPOSED PADDLE SIZE DOES NOT INCLUDE MOLD FLASH.
3) LEAD COPLANARITY SHALL BE 0.10 MILLIMETER MAX.
4) JEDEC REFERENCE IS MO-229, VARIATION VCCC.
5) DRAWING IS NOT TO SCALE.
0.25
1.40
0.65
RECOMMENDED LAND PATTERN
MPQ6400 Rev. 1.12
www.MonolithicPower.com
11/5/2019
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2019 MPS. All Rights Reserved.
10
TM
MPQ6400 -- LOW QUIESCENT CURRENT PROGRAMMABLE-DELAY SUPERVISORY CIRCUIT
CARRIER INFORMATION
Part Number
Package
Description
Quantity
/Reel
Reel
Diameter
Carrier Tape
Width
Carrier Tape
Pitch
QFN6
(2mmx2mm)
5000
13in
12mm
8mm
MPQ6400DG-33-Z
MPQ6400DG-33-AEC1-Z
MPQ6400DG-01-Z
MPQ6400DG-01-AEC1-Z
NOTICE: The information in this document is subject to change without notice. Users should warrant and guarantee that third
party Intellectual Property rights are not infringed upon when integrating MPS products into any application. MPS will not
assume any legal responsibility for any said applications.
MPQ6400 Rev. 1.12
www.MonolithicPower.com
11/5/2019
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2019 MPS. All Rights Reserved.
11
工商网监
湘ICP备2023018690号
