RJ-45 10/100 BASE-TX Jack with Magnetic Module
N51XX Series
• Single port shielded RJ-45 connector with 10/100 Magnetics • Operating temperature: 0°C to 70°C • Storage temperature: -40°C to 85°C • Available for all 10/100 transceiver Phy chips • Complies with IEEE standards and all 10/100 Ethernet
specifications including 350μH with 8mA DC Bias
• 1500Vrms Isolation
ELECTRICAL SPECIFICATION @ 25°C
Part Number Insertion Loss (dB max.) 0.3-100 MHz N5110 N5120 N5130 -1 -1 -1 1-30 MHz -18 -18 -18 Return Loss (dB min.) 30-60 MHz 18-20Log(f/30MHz) 18-20Log(f/30MHz) 18-20Log(f/30MHz) 60-80 MHz -12 -12 -12 Common to Common Mode Rejection (dB min.) 0.1-100 MHz -35 -35 -35 Common to Diferential Mode Rejection (dB min.) 0.1-100 MHz -40 -40 -40 Crosstalk (dB min.) 0.5-100 MHz -35 -35 -35
• Note: 1) Contact: 30 micro inch selective gold plating 2) Plastic Housing: Glass filled polyester UL94V-0 3) Pins: Phosphor bronze t=0.35mm
4)Operating Life: 750 cycles min. 5) PCB retention pre-solder: 1 Lb min. 6) PCB retention post- solder: 10 Lbs min.
• Other versions available with alternate pin-out configurations. Contact MPS Engineering Team.
Mechanical
0.75 [19.05] 0.62 [15.75] 0.85 [21.59] Ø0.035 [Ø0.89]
0.050 [1.27] 0.025 [0.63]
0.100 [2.54] 0.100 [2.54]
Pin 1
0.53 [13.59]
0.60 [15.19]
0.250 [6.35] 0.120 [3.05]
0.01 [0.25]
0.18 [4.57] 0.100 [2.54] 0.425 [10.79] 0.050 [1.27]
0.450 [11.43] Ø0.062 [Ø1.57] 0.61 [15.49]
Pin 1
8
Ø0.128 [Ø3.25]
Suggested Pad Layout
Dimensions Unless otherwise specified, all tolerances are: .XX ± 0.010” & .XXX ± 0.003” Inches [mm]
Product performance is limited to specified parameter. Data is subject to change without prior notice.
N3XXXS-A 0443TA 1
2463 208th, Ste. 205 Torrance, CA 90501
Phone: (310)533-1455 Fax: (310)533-1853
http://www.mpsind.com Email: sales@mpsind.com
RJ-45 10/100 BASE-TX Jack with Magnetic Module
Schematics:
N5110
N5120
TD+ 3
1CT:1CT
RJ45 2 TX+
RCT 2 RD+ 3 1CT:1CT
RJ45 1 TX+
TD-
1 1CT:1CT
1 TX-
RD- 4 TCT 6 1CT:1CT
2
TX-
RD+ 6 RCT 5 RD- 4 TCT 2 8
6 RX+ 4 5 3 RX7 8 75 x4 1000pF, 2kV
RD+ 7
3 RX+ 4 5
RD- 8
6 RX7 8
75 x8
1000pF, 2kV SHIELD
N5130
RJ45 TD+ 1 1CT:1CT 1 TX+
TD-
2 1CT:1CT
2 TX-
RD+ 3 RCT 4 RD- 6 TCT 7 8
3 RX+ 4 5 6 RX7 8 75 x4 1000pF, 2kV SHIELD
Product performance is limited to specified parameter. Data is subject to change without prior notice.
2
2463 208th, Ste. 205 Torrance, CA 90501
Phone: (310)533-1455 Fax: (310)533-1853
http://www.mpsind.com Email: sales@mpsind.com
很抱歉,暂时无法提供与“N5130”相匹配的价格&库存,您可以联系我们找货
免费人工找货