SFP-DR-53IR1

Datasheet SFP Dual Rate Bidirectional Transceivers SFP-DR-35IR1 and SFP-DR-53IR1 Features Designed for SFF-8472 compliance (SFP) 100 Mbps – 622 Mbps data rates - OC-3/STM-1 - OC-12/STM-4 Single-mode optics (Simplex LC) Single fiber, bi-directional Separate Tx and Rx wavelengths Class 1 laser (Tx): 1310 nm or 1550 nm 24 km distance Digital Diagnostics (SFF-8724) Commercial temperature rating General Operating Parameter Supply Voltage Total Current Power Supply Noise Rejectiona Operating Temperature of SFP Caseb Storage Temperature Data Rate OC-3/STM-1 Data Rate OC-12/STM-4 Data Rate Fast Ethernet a) 20 Hz to 155 MHz b) Maximum Relative Humidity is 85%, non-condensing Symbol Vcc Icc PSR Top Tst DR DR DR Min. 3.135 100 -5 -40 - Max. 3.465 300 70 85 155 622 125 Unit V mA mVp-p ºC ºC Mbps Mbps Mbps Transmitter Specifications (Optical) Parameter Optical Power Average Launch Power of Off Tx Extinction Ratio Eye Mask Optical Rise Timec Optical Fall Timec Mean Tx Wavelength SFP-DR-35IR1: 1310 Mean Tx Wavelength SFP-DR-35IR1: 1550 Spectral Width (RMS ): SFP-DR-35IR1 Spectral Width (RMS ): SFP-DR-53IR1 Dispersion Penalty (at 15 km) Relative Intensity Noise Optical Crosstalk Side Mode Suppression Ration Reflectance Tolerance c) 20% - 80% values Symbol Pop Poff Min -15 8.2 1274 1480 30 -24 Max -8 -45 500 500 1356 1580 4 1 1 -120 -45 - Unit dBm dBm dB ps ps nm nm nm nm dB dB/Hz dB dB dB ER tr tf λ λ Δλ Δλ RIN XT SMSR rp IEEE 802.3 and SONET/SDH compliant 1 Datasheet Transmitter Specifications (Electical) Parameter Input Differential Impedence PECL Single Ended Data Input Swing TxFault_Fault TxFault_Normal TxDisable_Disable TxDisable_Enable Symbol Rin Vin,p-p Vfault Vnormal Vd Ven Min 80 250 2 Vee 2 Vee Max 120 1200 Vcc Vee+0.5 Vcc Vee+0.8 Unit Ω mV V V V V Receiver Specifications (Optical) Parameter Receive Powerd Damage Threshold for Receiver Mean Rx Wavelength SFP-DR-35IR1: 1550 Mean Rx Wavelength SFP-DR-53IR1: 1310 LOS Assert LOS De-assert LOS Hysteresis Receiver Reflectance Symbol Rsens,low/high Pin,damage λ λ - Min -28 (sensitivity) 1480 1260 -38 0.5 - Max -8 (saturation) 0 1600 1360 -28 3 -12 Unit dBm dBm nm nm dBm dBm dB dB d) at 10-12 BER, FE unbalanced pattern, and 10-10 BER, 155.52 Mbps and 622.08 Mbps Receiver Specifications (Electrical) Parameter PECL Single Ended Data Output Swing Data Output Rise Time Data Output Fall Time Symbol Vout, p-p tr tf Min 185 Max 800 500 500 Unit mV ps ps Timing and Electrical Parameter Tx Disable Negate Time Tx Disable Assert Time Time to Initialize, Including Reset of Tx Fault Tx Fault Assert Time Tx Disable to Reset LOS Assert Time LOS De-assert Time Serial ID Clock Rate RX_LOS Voltage (High) RX_LOS Voltage (Low) LOS Output Voltage-Fault LOS Output Voltage-Normal MOD_DEF (0:2)-High MOD_DEF (0:2)-Low Symbol t_on t_off t_init t_fault t_reset t_loss_on t_loss_off f_serial_clock RX_LOSH RX_LOSL VLOS fault VLOSnormal Vh Vl Min 10 2 2 Vee 2 Vee Max 1 10 300 100 100 100 100 0.8 Vcc Vee+0.5 Vcc Vee+0.5 Unit ms μs ms μs μs μs μs KHz V V V V V V 2 Datasheet Digital Diagnostics Parameter Temperature Voltage Bias Current TX Power RX Power Range -5 to 70 0 to Vcc 0 to 120 -15 to -8 -28 to -8 Accuracy ±3 0.1 5 ±2 dB ±2 dB Unit ºC V mA dBm dBm Calibration Internal Internal External External External Bit Value 1/256 C 100 µV 0.002 mA 0.1µW 0.1µW Formula Tc(C)=Tad(16 bit signed twos complement)/256 V(Volts)=Vad(16 bit unsigned integer)*0.1 I(mA)=Islope*Iad(16 bit unsigned integer)+Ioffset TX_PWR(µW)=TX_PWRslope*TX_PWRad(16 bit unsigned integer) +TX_PWRoffset RX_PWR(µW)=A0+A1*x+A2*x^2+A3*x^3+A4*x^4 Pin 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Function VeeT TX_FAULT TX_DISABLE MOD_DEF2 MOD_DEF1 MOD_DEF0 NC LOS Notes TX GND Open Collector Internally Pulled High Serial Data Input Serial Clock Input Internally Grounded Not Connected Open Collector RX Ground RX Ground RX Ground RX Data Negative RX Data Positive RX Ground RX Power TX Power TX Ground TX Data Positive TX Data Negative TX Ground VeeR VeeR VeeR RXDRXD+ VeeR VccR VccT VeeT TXD+ TXDVeeT Ordering Information Model Description Data Rate (Mbps) Wavelength (nm) Tx Rx 1550 LC Blue 0 - 24 Connector Type Bail Latch Color Distance Range (km) SFP-DR-35IR1 SFP Dual Rate Bidirectional Transceiver SFP Dual Rate Bidirectional Transceiver 125 (Fast Ethernet) 155 (OC-3/STM-1) 622 (OC-12/STM-4) 125 (Fast Ethernet) 155 (OC-3/STM-1) 622 (OC-12/STM-4) 1310 SFP-DR-53IR1 1550 1310 LC Yellow 0 - 24 3 Datasheet Outline Drawing Units in mm (inches) Regulatory Compliances RoHS directive; China RoHS; California RoHS Law, USA and Canada UL listing; 21CFR 1040.10 and 1040.11; SFP MSA SFF-8074i; SFF-8472; Telecordia GR-468 Warnings Handling Precautions: This device is susceptible to damage as a result of electrostatic descharge (ESD). A static free environment is highly recommended. Follow guidelines according to proper ESD procedures. Laser Safety: Radiation emitted by laser devices can be dangerous to human eyes. Avoid eye exposure to direct or indeirect radiation. MRV has more than 50 offices throughout the world. Addresses, phone numbers and fax numbers are listed at www.mrv.com. Please e-mail us at sales@mrv.com or call us for assistance. MRV Los Angeles 20415 Nordhoff St. Chatsworth, CA 91311 800-338-5316 818-773-0900 MRV Boston 295 Foster St. Littleton, MA 01460 800-338-5316 978-952-4700 MRV International Business Park Moerfelden Waldeckerstrasse 13 64546 Moerfelden-Walldorf Germany Tel. (49) 6105/2070 Fax (49) 6105/207-100 All statements, technical information and recommendations related to the products herein are based upon information believed to be reliable or accurate. However, the accuracy or completeness thereof is not guaranteed, and no responsibility is assumed for any inaccuracies. Please contact MRV Communications for more information. MRV Communications and the MRV Communications logo are trademarks of MRV Communications, Inc. Other trademarks are the property of their respective holders. MRV-OP-SFPDR3553IR1-111308 3020013-001 Rev. A3 Copyright ©2008 MRV Communications, Inc. All Rights Reserved.