TM2-XFP

WDM & Optical Transport Datasheet LambdaDriver®–10 Gbps XFP - Dual Transponder Module (TM2-XFP) Features 10Gbps data rates settable to OC-192, 10GE or 10FC 3R support LIN (Link Integrity Notification) mechanism Remote Loop-back Power monitoring Y-Cable backup protection Hot swappable Applications 10Gbps signal regeneration and optical wavelength conversion TM2-XFP module Overview The TM2-XFP is a single slot module incorporating two independent 10Gbps transponders that convert the “gray” wavelength of a terminal equipment interface into ITU-T grid DWDM wavelength enabling its transport via the LambdaDriver® Optical Transport System. The integrated Automatic Laser Shutdown (ALS) feature automatically reduces the optical power of the transmitters to an eye safe level in case of a broken link. The ALS feature is implemented on both ports of the transponders (DWDM trunk and Terminal equipment access port). Remote and Local Loop-back functionality is supported and provides an essential tool for troubleshooting and maintenance operations in a live network. The Link Integrity Notification (LIN) function allows the terminal equipment to detect a link failure in the path between the two end nodes regardless of the location of the failure. The link failure detected at one end is propagated throughout the network by disabling the transmission towards the terminal equipment connected at the opposite end of the connection. Power monitoring of the Trunk (DWDM) and the Access ports via the Digital Diagnostics is provided by the XFP Transceivers. The TM2-XFP transponders also support the Y-Cable based fast switchover protection protocol. In this protection mode two adjacent transponders in a LambdaDriver® chassis run a protocol that maintains “operational” and “standby” transponders for a single 10Gbps port of an access device. The modules can be managed either through the LambdaDriver® management module by local craft terminal (CLI) or remotely by SNMP with MRV’s web-based NMS MegaVision® or any other SNMP management platform. Redundant Link Transponder Dual Transponder Not sure what solution best fits your needs? Visit www.mrv.com or e-mail us at sales@mrv.com WDM & Optical Transport Enviromental Operating Temperature Storage Temperature Relative Humidity Dimensions (W x H x D) Weight Connectors -5 0C to +45 0C -10 0C to +70 0C 85% max, non-condensing W: 26.93 mm (1.06 In); H:130.7 (5.145 In); D:227mm (8.956 In) 0.55 Kg (1.21 lb) XFP sockets all ports Technical Specifications Data Rate TX Port (Access Trasmit Port) RX Port (Access Receive Port) Optical parameters LEDs P/L n: Power Consumption Card without XFPs Each XFP 10GE or OC192 (STM-64) Connection to access equipment receive port Connection to access equipment transmit port Per the XFP Detection of XFP and Link presence or absence at port n 3.3W 6.8W ��� ��� ���� ���� �� ������� ���������� ��� ������ ���������� ����� �������� ��� ��� ������� ��� ������ �� ������������ ������ ������ �� �� ������������� �� ���� �� ��� ����������� ��� ����� ����� ���� ����� �������� ��� ����������� �� ����� ������������ ������������ ��� ����� ����� ���� ��� ������ ��� ���������� �� ����� � �� � � �� � �� � � � �� � � �� � �� � � ��� ��������������� ��������� ���� ���������� ���������������� �� ����� ������������������� ������� ���� ���� ��������� ���� ���� ������������ ��� ����������� ��������� ����������� ��� ��������������� ������� �� ��� �������� ������ ��� ����� ���� ����������� �������� �� �� �������� �� ��������� �������� ��� �������� �� ������������ ������� �� ��� ����������� ��� �� �������������� �� ������� ��� ��� ������������� ������ ������� ��� �������������� ��� ���� ������������ ��� �������������� ��� ��� ��� �������������� ���� ��� ���������� �� ��� ��������������� ���� ����� ���������� ��� ��� �������� �� ����� ���������� �������� MRV-LD-TM2-XFP Rev.2 08 -08 Order Info Product TM2-XFP Description 4x10Gbps Ethernet or OC-192 full-duplex, XFP ports. Copyright ©2008 MRV Communications, Inc. All Rights Reserved.