M60012JVCKK

Introduces M6001/M6002 SERIES TCXO and M6003/M6004 SERIES VCTCXO Operating stabilities to ± 0.5 ppm Stratum III stability of ±4.6 ppm (non-holdover) over an operating temperature of -40°C to +85°C for ten years 3.3 V or 5.0 V operating voltage Ideal for Signal Processing, Military/Avionic Communications, Flight Controls, WLAN, Basestations, DWDM, SERDES, SONET/SDH, 10G and 40G Ethernet Applications • • • • MtronPTI Corporate Headquarters 100 Douglas Avenue PO Box 630 Yankton, SD 57078-0630 1-800-762-8800 www.mtronpti.com APPLICATION INFORMATION M6001, M6002, M6003 & M6004 Series 9x14 mm FR-4, 5.0 or 3.3 Volt, HCMOS/TTL, TCXO and VCTCXO MtronPTI is one of the first companies to introduce a family of low voltage, surface mount TCXO’s and VCTCXO’s (voltage controlled TCXO) that are designed to provide network and wireless engineers with products that offer tight stability and excellent aging characteristics. The M6001-6004 Series utilizes hermetically sealed crystals, along with a “low-aging” process, to achieve consistent, long-term stability and minimal frequency shift in the customer’s application after re-flow. With this process, a first year aging rate of less than 1 ppm is achievable. A stability of ± 0.5 ppm over 0°C to +70°C is available as well as stabilities ranging from ± 1 ppm to ± 4.6 ppm over -40°C to +85°C. A special version (L-stability option) of the M6001-6004 is available for Stratum 3 applications. MtronPTI’s unique approach to crystal compensation enables these devices to achieve Stratum 3 stability (± 4.6 ppm) from -40°C to 85°C. The low phase noise (-143 dBc/Hz @ 10 kHz) make the M6001-6004 ideal for those design engineers working on high data-rate, low BER data communication network products. The M6001/M6002 (3.3 V and 5 V TCXO) and M6003/M6004 (3.3 V and 5 V VCTCXO) are ideally suited for a wide range of applications such as: SONET, SDH, SERDES, and PCS base stations; point to point/multi-point radios; WDM systems; Gig-Ethernet; 10G and 40G systems; test and measurement; frequency synthesis; frequency translation; specialized mobile radio, and WLAN. Standard output for the M6001-6004 series is HCMOS compatible and draws as little as 4 mA with a 3.3 volt supply at 19.440 MHz frequency. This low power consumption provides an advantage over similarly specified ovenized oscillators for power-sensitive applications. Customers can order product with or without the tristate feature. The M6003-6004 series offers ±10 ppm minimum pull range with excellent tuning linearity performance for critical PPL applications. These products are available in frequencies from 5 to 30 MHz, and can be offered in a surface mount FR-4 based platform with industry standard 9 x 14 mm footprint. Contact the factory for 14 pin DIP configuration. MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application. Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact us for your application specific requirements: MtronPTI 1-800-762-8800. M6001, M6002, M6003 & M6004 Series 9x14 mm FR-4, 5.0 or 3.3 Volt, HCMOS/TTL, TCXO and VCTCXO Features: • Operating stabilities to ± 0.5 ppm • Stratum III stability of ± 4.6 ppm (non holdover) Applications: • Ideal for Signal Processing, Military / Avionic Communiations, Flight Controls, WLAN, Basestations, DWDM, SERDES, SONET / SDH, 10G and 40G Ethernet applications. Pin Connections MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application. Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact us for your application specific requirements: MtronPTI 1-800-762-8800. M6001, M6002, M6003 & M6004 Series 9x14 mm FR-4, 5.0 or 3.3 Volt, HCMOS/TTL, TCXO and VCTCXO MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application. Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact us for your application specific requirements: MtronPTI 1-800-762-8800. M6001, M6002, M6003 & M6004 Series 9x14 mm FR-4, 5.0 or 3.3 Volt, HCMOS/TTL, TCXO and VCTCXO Solder Profile: Tape and Reel Specifications: MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application. Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact us for your application specific requirements: MtronPTI 1-800-762-8800. M6001, M6002, M6003 & M6004 Series 9x14 mm FR-4, 5.0 or 3.3 Volt, HCMOS/TTL, TCXO and VCTCXO Quality Parameters: Handling Information: Although protection circuitry has been designed into the M6001 - M6004 Series, proper precautions should be taken to avoid exposure to electrostatic discharge (ESD) during handling and mounting. MtronPTI utilizes a human-body model (HBM) and a charged-device model (CDM) for ESD-susceptibility testing and protection design evaluation. ESD voltage thresholds are dependent on the circuit parameters used to define the mode. Although no industry-wide standard has been adopted for the CDM, a standard HBM (resistance = 1500, capacitance = 100 pF) is widely used and therefore can be used for comparison purposes. The HBM ESD threshold presented here was obtained using these circuit parameters. Yankton PO Box 630 Yankton, SD 57078-0630 USA Phone: 605-665-9321 Toll Free: 800-762-8800 Fax: 605-665-1709 Email: SalesYKT@mtronpti.com Orlando 2525 Shader Rd Orlando, FL 32804 USA Phone: 407-298-2000 Fax: 407-293-2979 Email: SalesORL@mtronpti.com San Jose 985 University Ave Suite 38 Phone: 408-395-0700 Fax: 408-395-8074 Los Gatos, CA 95032 USA Email: SalesCA@mtronpti.com Europe The Netherlands Phone: 31-40-368-6818 Fax: 011-31-40-368-3501 Email: SalesEU@mtronpti.com Asia Pacific 1104 Shanghai Industrial Investment Building 48-62 Hennessy Road Wanchai, Hong Kong, China Phone: 852-2866-8023 Fax: 852-2529-1822 Email: SalesHK@mtronpti.com MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application. Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact us for your application specific requirements: MtronPTI 1-800-762-8800.