MHR68TAJ

MHR68TAJ

  • 厂商:

    MTRONPTI

  • 封装:

  • 描述:

    MHR68TAJ - 9x14 mm, 5.0 Volt, HCMOS/TTL, Clock Oscillator - MTRONPTI

  • 详情介绍
  • 数据手册
  • 价格&库存
MHR68TAJ 数据手册
MHR Series 9x14 mm, 5.0 Volt, HCMOS/TTL, Clock Oscillator NOTE: A capacitor of value 0.01 µF or greater between Vdd and Ground is recommended. Pin Connections MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application. Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact us for your application specific requirements: MtronPTI 1-800-762-8800. Revision: 11-21-06 MtronPTI Lead Free Solder Profile MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application. Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact us for your application specific requirements: MtronPTI 1-800-762-8800.
MHR68TAJ
1. 物料型号: - 型号为MHR系列,尺寸为9x14 mm,工作电压为5.0 Volt,兼容HCMOS/TTL电平,用途为时钟振荡器。

2. 器件简介: - 该器件是一个HCMOS/TTL兼容的时钟振荡器,具有5.0伏特的供电电压。

3. 引脚分配: - 引脚1:N/C或三态 - 引脚2:地(Gro und) - 引脚3:输出(Output) - 引脚4:正电源(+Vdd)

4. 参数特性: - 频率范围:1 MHz至80 MHz - 工作温度:详见订购信息 - 存储温度:-55°C至+125°C - 频率稳定性:详见订购信息 - 老化率:第一年-5 ppm,之后每年+5 ppm - 输入电压:4.5 V至5.5 V - 输入电流:在不同频率下分别为30 mA、50 mA、55 mA - 输出类型:HCMOS/TTL - 负载:详见说明1 - 对称性(占空比):详见订购信息 - 逻辑"1"电平:Voh为90%Vdd或Vdd-0.5V - 逻辑"0"电平:Vol为10%Vdd或0.5V - 输出电流:±12 mA - 上升/下降时间:在不同频率下分别为10 ns、8 ns、6 ns - 三态功能:输入逻辑"1"或浮动时输出激活,输入逻辑"0"时输出禁用至高阻态 - 启动时间:10 ms - 随机抖动:Rj为5 ps至12 ps RMS(1-Sigma)

5. 功能详解: - 该振荡器提供HCMOS/TTL兼容的输出,具有三态功能,可以在输入逻辑"1"或浮动时激活输出,在输入逻辑"0"时禁用输出至高阻态。

6. 应用信息: - 推荐在Vdd和地之间加入0.01 µF或更大的电容以稳定电源。 - 详细应用要求请联系MtronPTI。

7. 封装信息: - 封装尺寸为9x14 mm。
MHR68TAJ 价格&库存

很抱歉,暂时无法提供与“MHR68TAJ”相匹配的价格&库存,您可以联系我们找货

免费人工找货