26100C

2600 Series www.murata-ps.com Bobbin Wound Surface Mount Inductors SELECTION GUIDE (UNSHIELDED TYPES) Order Code FEATURES „ RoHS compliant „ Up to 4.6A IDC „ 3.3μH to 680μH „ Optional integral EMI shield „ Low RDC „ Surface mount „ Compact size „ Tape and reel packaging „ J-STD-020C reflow „ Backward compatible with Sn/Pb soldering systems DESCRIPTION 263R3C 264R7C 266R8C 26100C 26120C 26150C 26180C 26220C 26330C 26470C 26680C 26101C 26151C 26221C 26331C 26471C 26681C 3.3 4.7 6.8 10 12 15 18 22 33 47 68 100 150 220 330 470 680 2.13-3.95 3.41-6.34 5.00-9.28 8.00-12.0 7.95-14.8 12.0-18.0 12.9-24.0 17.6-26.4 26.4-39.6 42.3-51.7 61.2-74.8 90.0-110 135-165 198-242 297-363 423-517 612-748 DC Current1 Max. A DC Resistance Max. mΩ Nom. MHz 4.40 3.60 3.10 2.60 2.42 2.27 2.10 1.95 1.50 1.28 1.11 0.97 0.78 0.66 0.52 0.42 0.28 35 45 54 60 68 90 87 100 120 170 220 350 470 730 1150 1480 2250 53.0 37.0 31.0 24.8 24.0 20.2 19.0 16.9 12.8 10.2 8.37 6.56 5.20 4.00 3.14 2.54 1.97 DC Current1 Max. A DC Resistance Max. mΩ Nom. MHz 4.60 3.80 3.21 2.65 2.55 2.45 2.32 2.20 1.80 1.50 1.26 1.05 0.85 0.70 0.57 0.48 0.40 33 38 43 50 58 60 74 70 100 120 170 250 400 520 800 1200 1780 46.0 38.0 30.0 22.9 21.0 19.7 16.0 15.5 11.5 9.44 7.47 6.04 4.67 3.75 2.87 2.33 1.83 SRF SELECTION GUIDE (SHIELDED TYPES) Order Code The 2600 series is a range of bobbin-wound, surface-mount inductors designed for use in switching power supply, and power line filter circuits. The parts are suitable for any application requiring a high saturation current in a miniature surface-mount footprint. Where EMI is a critical factor, the devices are available with an integral ferrite EMI shield. Inductance Inductance Range (1kHz, 100mVAC) (1kHz, 100mVAC) Nom. Min. - Max. μH μH Inductance Inductance Range (1kHz, 100mVAC) (1kHz, 100mVAC) Nom. Min. - Max. μH μH 26S3R3C 26S4R7C 26S6R8C 26S100C 26S120C 26S150C 26S180C 26S220C 26S330C 26S470C 26S680C 26S101C 26S151C 26S221C 26S331C 26S471C 26S681C 3.3 4.7 6.8 10 12 15 18 22 33 47 68 100 150 220 330 470 680 2.69-5.46 3.58-7.15 4.60-8.97 8.00-12.0 8.42-15.9 12.0-18.0 13.4-25.6 18.7-26.4 28.1-39.6 40.0-56.4 57.8-81.6 85.0-120 128-180 187-264 281-396 400-564 578-816 SRF ABSOLUTE MAXIMUM RATINGS Operating free air temperature range Storage temperature range -40°C to 85°C -40°C to 125°C SOLDERING INFORMATION2   For full details go to www.murata-ps.com/rohs Peak reflow temperature Pin finish 245˚C Hot dipped tin Specifications typical at TA = 25°C 1 The maximum DC current is the value at which the inductance falls to 80% of its nominal value or when its temperature rise reaches 40°C, whichever is sooner. 2 For further information, please visit www.murata-ps.com/rohs www.murata-ps.com/support KMP_2600C_B04 Page 1 of 4 2600 Series Bobbin Wound Surface Mount Inductors MECHANICAL DIMENSIONS UNSHIELDED TYPES SHIELDED TYPES 9.00±0.40 (0.35±0.02) 100C 100C 11.60 (0.46) 5.40±0.50 (0.21±0.02) 5.40±0.40 (0.21±0.02) 1.00 (0.039) 10.00±0.40 (0.39±0.02) Unless otherwise stated all dimensions in mm (inches) ±0.25 (0.01). Package Weight 1.54g Typ. 12.60 (0.496) Unless otherwise stated all dimensions in mm (inches) ±0.25 (0.01). Package Weight 2.34g Typ. RECOMMENDED FOOTPRINT RECOMMENDED FOOTPRINT R1.00 (0.039) R1.00 (0.039) 10.00 (0.394) 10.00 (0.394) 2.50 (0.10) 2.50 (0.10) 9.50 (0.374) 9.50 (0.374) www.murata-ps.com/support KMP_2600C_B04 Page 2 of 4 2600 Series Bobbin Wound Surface Mount Inductors TAPE & REEL SPECIFICATIONS TAPE OUTLINE DIMENSIONS - UNSHIELDED PARTS       
 
 
   $ œ œ   

.BY   Reel quantity: 500 Unless otherwise stated all dimensions are in mm (inches) ±0.1 (0.004). %JSFDUJPO
PG
VOSFFMJOH TAPE OUTLINE DIMENSIONS - SHIELDED PARTS     
   
 
   $ œ œ  
Reel quantity: 500 Unless otherwise stated all dimensions are in mm (inches) ±0.1 (0.004).




.BY
  %JSFDUJPO
PG
VOSFFMJOH www.murata-ps.com/support KMP_2600C_B04 Page 3 of 4 2600 Series Bobbin Wound Surface Mount Inductors TAPE & REEL SPECIFICATIONS REEL OUTLINE DIMENSIONS 

.BY 

.JO  "      -FBEFS
4FDUJPO 

.JO 
 .JO 

.JO #p (PPET &ODMPTVSF 4FDUJPO $p 5SBJMFS
4FDUJPO 

.JO 

.JO All dimension in mm [inches] * Includes flange distortion at outer edge † Measured at hub A B (Max.) C Unshielded Types 23.9-27.4 (0.94-1.08) 30.4 (1.197) 24.4-26.4 (0.96-1.04) Shielded Types 23.9-27.4 (0.94-1.08) 30.4 (1.197) 24.4-26.4 (0.96-1.04) This product is subject to the following operating requirements and the Life and Safety Critical Application Sales Policy: Refer to: http://www.murata-ps.com/requirements/ Murata Power Solutions (Milton Keynes) Ltd. makes no representation that the use of its products in the circuits described herein, or the use of other technical information contained herein, will not infringe upon existing or future patent rights. The descriptions contained herein do not imply the granting of licenses to make, use, or sell equipment constructed in accordance therewith. Specifications are subject to change without notice. © 2020 Murata Power Solutions (Milton Keynes) Ltd. www.murata-ps.com/support KMP_2600C_B04 Page 4 of 4