500DSBB135M000ACH

Si500D D IFFERENTIAL O UTPUT S I L I C O N O SCILLATOR Features         Quartz-free, MEMS-free, and PLL-free all-silicon oscillator Any output frequencies from 0.9 to 200 MHz Short lead times Excellent temperature stability (±20 ppm) Highly reliable startup and operation High immunity to shock and vibration Low jitter: 80 MHz Mid-level Diff swing Mid-level — — — — 34.0 19.3 14.9 25.3 36.0 22.2 16.5 29.3 mA mA mA mA — 33 36 mA — 16 — mA — — — — — 46 – 13 ns/TCLK — — — VDD – 1.5 .720 — 24.5 24.3 22.2 9.7 1.0 — — — 1.1 — — N/A 27.7 26.7 25 10.7 1.9 54 + 13 ns/TCLK 460 800 1.6 VDD – 1.34 .880 — mA mA mA mA mA % ps ps ns V VPK V Diff swing .68 — .95 VPK Mid-level Diff swing Mid-level Diff swing Mid-level Diff swing DC termination per pad VOH, sourcing 9 mA VOL, sinking 9 mA VOH VOL VOH VOL VOH VOL From time VDD crosses min spec supply 1.15 0.25 0.85 0.25 0.35 0.65 45 VDD – 0.6 — VTT + 0.375 — VTT + 0.48 — VTT + 0.48 — — — — — — — — — — — — — — — — 1.26 0.45 0.96 0.45 0.425 0.82 55 — 0.6 — VTT – 0.375 — VTT – 0.48 — VTT – 0.48 V VPK V VPK V VPK  V V — — 2 ms — — 250 + 3 x TCLK ns — — 250 + 3 x TCLK ns — — 12 + 3 x TCLK µs OE Deassertion to Clk Stop Return from Output Driver Stopped Mode Return From Tri-State Time V V V Notes: 1. Inclusive of 25 °C initial frequency accuracy, operating temperature range, supply voltage change, output load change, first-year aging at 25 °C, shock, vibration, and one solder reflow. 2. Inclusive of 25 °C initial frequency accuracy, operating temperature range, supply voltage change, output load change, ten-year aging at 85 °C, shock, vibration, and one solder reflow. 3. See “AN409: Output Termination Options for the Si500S and Si500D Silicon Oscillators” for further details regarding output clock termination recommendations. 4. VTT = .5 x VDD. 5. VTT = .45 x VDD. 2 Rev. 1.1 Si500D Parameters Condition Min Typ Max Units — — 2 Non-CMOS — 1 2 CMOS, CL = 7 pF — 1 3 — 0.6 1 — 0.7 1.5 ms ps RMS ps RMS ps RMS ps RMS Return From Powerdown Time Period Jitter (1-sigma) Integrated Phase Jitter 1.0 MHz – min(20 MHz, 0.4 x FOUT),non-CMOS 1.0 MHz – min(20 MHz, 0.4 x FOUT),CMOS format Notes: 1. Inclusive of 25 °C initial frequency accuracy, operating temperature range, supply voltage change, output load change, first-year aging at 25 °C, shock, vibration, and one solder reflow. 2. Inclusive of 25 °C initial frequency accuracy, operating temperature range, supply voltage change, output load change, ten-year aging at 85 °C, shock, vibration, and one solder reflow. 3. See “AN409: Output Termination Options for the Si500S and Si500D Silicon Oscillators” for further details regarding output clock termination recommendations. 4. VTT = .5 x VDD. 5. VTT = .45 x VDD. Rev. 1.1 3 Si500D Package Specifications Table 1. Package Diagram Dimensions (mm) Dimension A A1 b D Min 0.80 0.00 0.59 3.20 BSC. e Nom 0.85 0.03 0.64 Dimension L1 aaa bbb ccc Min 0.00 — — — Nom 0.05 — — — Max 0.10 0.10 0.10 0.08 1.27 BSC. ddd — — 0.10 E 4.00 BSC. eee — — 0.05 L 0.95 1.00 Max 0.90 0.05 0.69 1.05 Table 2. Pad Connections Table 3. Tri-State/Powerdown/Driver Stopped Function on OE (3rd Option Code) 1 OE 2 NC—Make no external connection to this pin 3 GND 4 Output 5 Complementary Output 6 VDD Dimension C1 E X1 Y1 A B C Open Active Active Active D E F Active Active Active 1 TriActive State Level Powerdown Active Driver Stopped Active 0 TriPowerDriver Active Active down Stopped Level State 0 C CC CC T TTT TT (mm) 2.70 1.27 0.75 1.55 Y Y WW 0 = Si500 CCCCC = mark code TTTTTT = assembly manufacturing code YY = year WW = work week Figure 2. Top Mark Figure 1. Recommended Land Pattern 4 Rev. 1.1 Active Si500D Environmental Compliance Parameter Conditions/Test Method Mechanical Shock MIL-STD-883, Method 2002.4 Mechanical Vibration MIL-STD-883, Method 2007.3 A Resistance to Soldering Heat MIL-STD-202, 260 C° for 8 seconds Solderability MIL-STD-883, Method 2003.8 Damp Heat IEC 68-2-3 Moisture Sensitivity Level J-STD-020, MSL 3 Ordering Information The Si500D supports a variety of options including frequency, output format, supply voltage, and tristate/powerdown. Specific device configurations are programmed into the Si500D at time of shipment. Configurations are specified using the figure below. Silicon Labs provides a web-based part number utility that can be used to simplify part number configuration. Refer to www.silabs.com/SiliconXOPartnumber to access this tool. The Si500D XO series is supplied in a ROHS-compliant, Pb-free, 6-pad, 3.2 x 4.0 mm package. Tape and reel packaging is available as an ordering option. 500D X Si500 Differential Oscillator X X XXMXXXX A C X R Frequency R = Tape & Reel Blank = Cut-Tape xMxxxxx: fOUT < 10 MHz xxMxxxx: 10 MHz < fOUT < 100 MHz xxxMxxx: fOUT > 100 MHz 1st Option Code A B C D E F G H J K L M N P Q R S T U V W X VDD Format 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 1.8 1.8 1.8 1.8 1.8 1.8 LVPECL Low Power LVPECL LVDS HCSL Dual Output CMOS Differential CMOS Dual Output SSTL Differential SSTL LVPECL Low Power LVPECL LVDS HCSL Dual Output CMOS Differential CMOS Dual Output SSTL Differential SSTL LVDS HCSL Dual Output CMOS Differential CMOS Dual Output SSTL Differential SSTL 3rd Option Code Tri-State/Powerdown/ Output Driver Stopped A OE active high/tristate B OE active low/tristate C OE active high/powerdown D OE active low/powerdown E OE active high/driver stopped F OE active low/driver stopped 2nd Option Code A B Stability (ppm, max) ±150 ±250 Oper. Temp Range F 0 to 70 °C *H 0 to 85 °C Product Revision = C Package A 3.2 x 4.0 mm SMD *Note: Only +250 ppm is supported. Rev. 1.1 5 Si500D DOCUMENT CHANGE LIST Revision 0.2 to Revision 0.3   Revision B to Revision C updated in Ordering Information 0 to 85 C° Operating Temperature Range option added Revision 0.3 to Revision 1.0  Clarified SSTL specifications. Revised Differential CMOS supply current values.  Clarified Differential CMOS supply current loading conditions.  Revision 1.0 to Revision 1.1  Updated Ordering information for ±250 ppm from 0 to +85 °C.  Updated jitter from 1.5 ps to 1.5 ps rms.  Updated operating temperature to include extended commercial at 0 to +85 °C.  Updated features to include LVPECL, LVDS, and HCSL. 6 Rev. 1.1 ClockBuilder Pro One-click access to Timing tools, documentation, software, source code libraries & more. Available for Windows and iOS (CBGo only). www.silabs.com/CBPro Timing Portfolio www.silabs.com/timing SW/HW Quality Support and Community www.silabs.com/CBPro www.silabs.com/quality community.silabs.com Disclaimer Silicon Labs intends to provide customers with the latest, accurate, and in-depth documentation of all peripherals and modules available for system and software implementers using or intending to use the Silicon Labs products. Characterization data, available modules and peripherals, memory sizes and memory addresses refer to each specific device, and "Typical" parameters provided can and do vary in different applications. Application examples described herein are for illustrative purposes only. Silicon Labs reserves the right to make changes without further notice to the product information, specifications, and descriptions herein, and does not give warranties as to the accuracy or completeness of the included information. Without prior notification, Silicon Labs may update product firmware during the manufacturing process for security or reliability reasons. Such changes will not alter the specifications or the performance of the product. Silicon Labs shall have no liability for the consequences of use of the information supplied in this document. This document does not imply or expressly grant any license to design or fabricate any integrated circuits. The products are not designed or authorized to be used within any FDA Class III devices, applications for which FDA premarket approval is required or Life Support Systems without the specific written consent of Silicon Labs. A "Life Support System" is any product or system intended to support or sustain life and/or health, which, if it fails, can be reasonably expected to result in significant personal injury or death. Silicon Labs products are not designed or authorized for military applications. Silicon Labs products shall under no circumstances be used in weapons of mass destruction including (but not limited to) nuclear, biological or chemical weapons, or missiles capable of delivering such weapons. Silicon Labs disclaims all express and implied warranties and shall not be responsible or liable for any injuries or damages related to use of a Silicon Labs product in such unauthorized applications. Trademark Information Silicon Laboratories Inc.® , Silicon Laboratories®, Silicon Labs®, SiLabs® and the Silicon Labs logo®, Bluegiga®, Bluegiga Logo®, ClockBuilder®, CMEMS®, DSPLL®, EFM®, EFM32®, EFR, Ember®, Energy Micro, Energy Micro logo and combinations thereof, "the world’s most energy friendly microcontrollers", Ember®, EZLink®, EZRadio®, EZRadioPRO®, Gecko®, Gecko OS, Gecko OS Studio, ISOmodem®, Precision32®, ProSLIC®, Simplicity Studio®, SiPHY®, Telegesis, the Telegesis Logo®, USBXpress® , Zentri, the Zentri logo and Zentri DMS, Z-Wave®, and others are trademarks or registered trademarks of Silicon Labs. ARM, CORTEX, Cortex-M3 and THUMB are trademarks or registered trademarks of ARM Holdings. Keil is a registered trademark of ARM Limited. Wi-Fi is a registered trademark of the Wi-Fi Alliance. All other products or brand names mentioned herein are trademarks of their respective holders. Silicon Laboratories Inc. 400 West Cesar Chavez Austin, TX 78701 USA http://www.silabs.com