Is Now Part of
To learn more about ON Semiconductor, please visit our website at
www.onsemi.com
Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers
will need to change in order to meet ON Semiconductor’s system requirements. Since the ON Semiconductor
product management systems do not have the ability to manage part nomenclature that utilizes an underscore
(_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain
device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated
device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please
email any questions regarding the system integration to Fairchild_questions@onsemi.com.
ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number
of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right
to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON
Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON
Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s
technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA
Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended
or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out
of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor
is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
Single-Channel: 6N135M, 6N136M, HCPL4503M
Dual-Channel: HCPL2530M, HCPL2531M
8-Pin DIP High Speed Transistor Optocouplers
Features
Description
•
•
•
•
The 6N135M, 6N136M, HCPL4503M, HCPL2530M, and
HCPL2531M optocouplers consist of an AlGaAs LED
optically coupled to a high speed photodetector transistor for each channel.
High Speed – 1 MBit/s
Dual-Channel: HCPL2530M, HCPL2531M
CTR Guaranteed 0°C to 70°C
No Base Connection for Improved Noise Immunity
(HCPL4503M)
• Superior CMR of 15,000 V/μs Minimum (HCPL4503M)
• Safety and Regulatory Approvals
– UL1577, 5,000 VACRMS for 1 Minute
– DIN EN/IEC60747-5-5
Applications
•
•
•
•
The HCPL4503M has no internal connection to the phototransistor base for improved noise immunity. An internal noise shield provides superior common mode
rejection of up to 50,000 V/μs.
Related Resources
Line Receivers
Pulse Transformer Replacement
Output Interface to CMOS-LSTTL-TTL
Wide-Bandwidth Analog Coupling
•
•
•
•
Schematics
N/C 1
A separate connection for the bias of the photodiode
improves the speed by several orders of magnitude over
conventional phototransistor optocouplers by reducing
the base-collector capacitance of the input transistor.
www.fairchildsemi.com/products/optoelectronics/
www.fairchildsemi.com/pf/HC/HCPL0500.html
www.fairchildsemi.com/pf/FO/FODM452.html
www.fairchildsemi.com/pf/FO/FOD050L.html
Package Outlines
8 VCC
+ 1
8 VCC
8
8
1
1
V
F1
+ 2
7 VB
_
2
7 V01
3
6 V02
V
F
_
3
6 VO
_
8
V
F2
N/C 4
5 GND
6N135M, 6N136M, HCPL4503M
+ 4
8
1
1
Figure 2. Package Outlines
5 GND
HCPL2530M, HCPL2531M
Pin 7 is not connected in the
HCPL4503M
Figure 1. Schematics
©2008 Fairchild Semiconductor Corporation
6N13XM, HCPLXXXXM Rev. 1.7
www.fairchildsemi.com
Single-Channel: 6N135M, 6N136M, HCPL4503M
Dual-Channel: HCPL2530M, HCPL2531M — 8-Pin DIP High Speed Transistor Optocouplers
January 2016
As per DIN EN/IEC 60747-5-5, this optocoupler is suitable for “safe electrical insulation” only within the safety limit
data. Compliance with the safety ratings shall be ensured by means of protective circuits.
Parameter
Installation Classifications per DIN VDE
0110/1.89 Table 1, For Rated Mains Voltage
Characteristics
< 150 VRMS
I–IV
< 300 VRMS
I–IV
< 450 VRMS
I–III
< 600 VRMS
I–III
Climatic Classification
40/100/21
Pollution Degree (DIN VDE 0110/1.89)
2
Comparative Tracking Index
Symbol
VPR
175
Parameter
Value
Unit
Input-to-Output Test Voltage, Method A, VIORM x 1.6 = VPR,
Type and Sample Test with tm = 10 s, Partial Discharge < 5 pC
1,335
Vpeak
Input-to-Output Test Voltage, Method B, VIORM x 1.875 = VPR,
100% Production Test with tm = 1 s, Partial Discharge < 5 pC
1,669
Vpeak
890
Vpeak
VIORM
Maximum Working Insulation Voltage
VIOTM
Highest Allowable Over-Voltage
6,000
Vpeak
External Creepage
≥ 8.0
mm
External Clearance
External Clearance (for Option TV, 0.4" Lead Spacing)
DTI
TS
IS,INPUT
PS,OUTPUT
RIO
≥ 7.4
mm
≥ 10.16
mm
≥ 0.5
mm
Case
Temperature(1)
150
°C
Input
Current(1)
200
mA
300
mW
> 109
Ω
Distance Through Insulation (Insulation Thickness)
Output Power (Duty Factor ≤ 2.7%)(1)
Insulation Resistance at TS, VIO = 500 V(1)
Note:
1. Safety limit value - maximum values allowed in the event of a failure.
©2008 Fairchild Semiconductor Corporation
6N13XM, HCPLXXXXM Rev. 1.7
www.fairchildsemi.com
2
Single-Channel: 6N135M, 6N136M, HCPL4503M
Dual-Channel: HCPL2530M, HCPL2531M — 8-Pin DIP High Speed Transistor Optocouplers
Safety and Insulation Ratings
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be
operable above the recommended operating conditions and stressing the parts to these levels is not recommended.
In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability.
The absolute maximum ratings are stress ratings only. TA = 25°C unless otherwise specified.
Symbol
Parameter
Test Conditions
Value
Unit
TSTG
Storage Temperature
-40 to +125
°C
TOPR
Operating Temperature
-40 to +100
°C
TJ
TSOL
Junction Temperature
Lead Solder Temperature
-40 to +125
°C
260 for 10 sec
°C
25
mA
50
mA
1.0
A
5
V
45
mW
EMITTER
IF (avg)
IF (pk)
IF (trans)
VR
PD
DC/Average Forward Input Current
Each Channel(2)
50% Duty Cycle,
1 ms P.W.
Peak Forward Input Current
Each Channel(3)
Peak Transient Input Current Each Channel ≤ 1 μs P.W., 300 pps
Reverse Input Voltage Each Channel
Input Power Dissipation Each
Channel(4)
DETECTOR
IO (avg)
Average Output Current Each Channel
8
mA
IO (pk)
Peak Output Current Each Channel
16
mA
VEBR
Emitter-Base Reverse Voltage
5
V
VCC
Supply Voltage
-0.5 to 30
V
VO
Output Voltage
IB
Base Current
PD
Output Power Dissipation Each Channel(5)
6N135M and 6N136M
6N135M and 6N136M
-0.5 to 20
V
5
mA
100
mW
Notes:
2. Derate linearly above 70°C free-air temperature at a rate of 0.8 mA/°C.
3. Derate linearly above 70°C free-air temperature at a rate of 1.6 mA/°C.
4. Derate linearly above 70°C free-air temperature at a rate of 0.9 mW/°C.
5. Derate linearly above 70°C free-air temperature at a rate of 2.0 mW/°C.
Recommended Operating Conditions
The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended
operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not
recommend exceeding them or designing to absolute maximum ratings.
Symbol
VCC
Parameter
Supply Voltage
Min.
Max.
Unit
4.5
20.0
V
TA
Ambient Operating Temperature
0
70
°C
IFL
Input Current, Low Level
0
250
μA
IFH
Input Current, High Level(6)
6.3
20.0
mA
Note:
6. 6.3 mA is a guard banded value which allows for at least 20% CTR degradation. Initial input current threshold value
is 5.0 mA or less.
©2008 Fairchild Semiconductor Corporation
6N13XM, HCPLXXXXM Rev. 1.7
www.fairchildsemi.com
3
Single-Channel: 6N135M, 6N136M, HCPL4503M
Dual-Channel: HCPL2530M, HCPL2531M — 8-Pin DIP High Speed Transistor Optocouplers
Absolute Maximum Ratings
VCC = 5.0 V, TA = 0°C to 70°C unless otherwise specified.
Individual Component Characteristics
Symbol
Parameter
Device
Test Conditions
Min.
Typ.
Max.
1.45
1.70
Unit
EMITTER
VF
BVR
ΔVF/ΔTA
All
IF = 16 mA, TA = 25°C
All
IF = 16 mA
All
IR = 10 µA
Temperature Coefficient
All
of Forward Voltage
IF = 16 mA
Input Forward Voltage
Input Reverse
Breakdown Voltage
1.80
5
V
21
V
-1.7
mV/°C
DETECTOR
IF = 0 mA, VO = VCC = 5.5 V,
TA = 25°C
0.0007
0.5
6N135M,
IF = 0 mA, VO = VCC = 15 V,
6N136M,
TA = 25°C
HCPL4503M
0.0019
1
All
IOH
Logic High Output
Current
All
ICCL
ICCH
Logic Low Supply
Current
Logic High Supply
Current
IF = 0 mA, VO = VCC = 15 V
6N135M,
IF = 16 mA, VO = Open,
6N136M,
VCC = 15 V
HCPL4503M
HCPL2530M, IF1 = IF2 = 16 mA,
HCPL2531M VO = Open, VCC = 15 V
6N135M,
IF = 0 mA, VO = Open,
6N136M,
VCC = 15 V
HCPL4503M
HCPL2530M, IF = 0 mA, VO = Open,
HCPL2531M VCC = 15 V
©2008 Fairchild Semiconductor Corporation
6N13XM, HCPLXXXXM Rev. 1.7
µA
50
163
200
µA
400
0.0004
2
µA
4
www.fairchildsemi.com
4
Single-Channel: 6N135M, 6N136M, HCPL4503M
Dual-Channel: HCPL2530M, HCPL2531M — 8-Pin DIP High Speed Transistor Optocouplers
Electrical Characteristics
TA = 0°C to 70°C unless otherwise specified.
Transfer Characteristics
Symbol
Parameter
Device
Test Conditions
Min.
Typ.
Max.
Unit
7
38
50
%
19
38
50
%
COUPLED
6N135M,
HCPL2530M
CTR
Current Transfer
Ratio(7)
6N136M,
HCPL4503M,
HCPL2531M
IF = 16 mA, VO = 0.4 V,
VCC = 4.5 V, TA = 25°C
6N135M
VOL = 0.4 V
HCPL2530M
VOL = 0.5 V
IF = 16 mA,
6N136M,
VCC = 4.5 V
HCPL4503M
HCPL2531M
VOL = 0.4 V
VOL
%
15
%
VOL = 0.5 V
6N135M
Logic LOW Output
Voltage
5
IF = 16 mA, IO = 1.1 mA,
HCPL2530M VCC = 4.5 V, TA = 25°C
0.12
6N136M,
HCPL4503M IF = 16 mA, IO = 3 mA,
VCC = 4.5 V, TA = 25°C
HCPL2531M
0.20
6N135M,
IF = 16 mA, IO = 0.8 mA,
HCPL2530M VCC = 4.5 V
HCPL4503M, IF = 16 mA, IO = 2.4 mA,
HCPL2531M VCC = 4.5 V
0.4
0.5
0.4
0.5
0.11
0.5
0.18
0.5
V
Note:
7. Current Transfer Ratio is defined as a ratio of output collector current, IO, to the forward LED input current, IF, times
100%.
©2008 Fairchild Semiconductor Corporation
6N13XM, HCPLXXXXM Rev. 1.7
www.fairchildsemi.com
5
Single-Channel: 6N135M, 6N136M, HCPL4503M
Dual-Channel: HCPL2530M, HCPL2531M — 8-Pin DIP High Speed Transistor Optocouplers
Electrical Characteristics (continued)
TA = 0°C to 70°C unless otherwise specified.
Switching Characteristics
Symbol
Parameter
Device
Test Conditions
Max.
Unit
1.5
µs
0.8
µs
6N135M,
RL = 4.1 kΩ, IF = 16 mA(8)
HCPL2530M (Figure 15)
2.0
µs
6N136M,
R = 1.9 kΩ, IF = 16 mA(9)
HCPL4503M, L
(Figure 15)
HCPL2531M
1.0
µs
1.5
µs
0.8
µs
2.0
µs
1.0
µs
6N135M
TA = 25°C, RL = 4.1 kΩ,
(8)
HCPL2530M IF = 16 mA (Figure 15)
tPHL
Propagation Delay
Time to Logic LOW
6N136M,
RL = 1.9 kΩ,
HCPL4503M TA = 25°C, (9)
IF = 16 mA (Figure 15)
HCPL2531M
6N135M
TA = 25°C, RL = 4.1 kΩ,
(8)
I
HCPL2530M F = 16 mA (Figure 15)
tPLH
Propagation Delay
Time to Logic HIGH
6N136M,
RL = 1.9 kΩ,
HCPL4503M TA = 25°C, (9)
IF = 16 mA (Figure 15)
HCPL2531M
6N135M,
RL = 4.1 kΩ, IF = 16
HCPL2530M (Figure 15)
Min.
Typ.
0.23
0.25
0.25
0.28
0.45
0.29
0.26
0.18
mA(8)
6N136M,
R = 1.9 kΩ, IF = 16 mA(9)
HCPL4503M, L
(Figure 15)
HCPL2531M
|CMH|
Common Mode
Transient Immunity at
Logic High
IF = 0 mA, VCM = 10 VP-P,
6N135M,
RL = 4.1 kΩ, TA = 25°C(10)
HCPL2530M
(Figure 16)
10,000
IF = 0 mA, VCM = 10 VP-P,
6N136M,
RL = 1.9 kΩ, TA = 25°C(10)
HCPL2531M
(Figure 16)
10,000
V/µs
IF = 0 mA, VCM = 1,500 VP-P,
HCPL4503M RL = 4.1 kΩ, TA = 25°C(10)
15,000 50,000
(Figure 16)
|CML|
Common Mode
Transient Immunity at
Logic Low
IF = 16 mA, VCM = 10 VP-P,
6N135M,
RL = 4.1 kΩ, TA = 25°C(10)
HCPL2530M
(Figure 16)
10,000
IF = 16 mA, VCM = 10 VP-P,
6N136M,
RL = 1.9 kΩ(10)
HCPL2531M
(Figure 16)
10,000
V/µs
IF = 0 mA, VCM = 1,500 VP-P,
HCPL4503M RL = 4.1 kΩ, TA = 25°C(10)
15,000 50,000
(Figure 16)
Notes:
8. The 4.1 kΩ load represents 1 LSTTL unit load of 0.36 mA and 6.1 kΩ pull-up resistor.
9. The 1.9 kΩ load represents 1 TTL unit load of 1.6 mA and 5.6 kΩ pull-up resistor.
10. Common mode transient immunity in logic high level is the maximum tolerable (positive) dVcm/dt on the leading edge
of the common mode pulse signal, VCM, to assure that the output will remain in a logic high state (i.e., VO > 2.0 V).
Common mode transient immunity in logic low level is the maximum tolerable (negative) dVcm/dt on the trailing edge
of the common mode pulse signal, VCM, to assure that the output will remain in a logic low state (i.e., VO < 0.8 V).
©2008 Fairchild Semiconductor Corporation
6N13XM, HCPLXXXXM Rev. 1.7
www.fairchildsemi.com
6
Single-Channel: 6N135M, 6N136M, HCPL4503M
Dual-Channel: HCPL2530M, HCPL2531M — 8-Pin DIP High Speed Transistor Optocouplers
Electrical Characteristics (continued)
Symbol
Parameter
Device
Test Conditions
Min.
5,000
VISO
Withstand Isolation
Test Voltage
All
RH ≤ 50%, II-O ≤ 10 µA
t = 1 minute,
f = 50 Hz(11)(13)
RI-O
Resistance
(Input to Output)
All
VI-O = 500 VDC(11)
CI-O
Capacitance
(Input to Output)
All
f = 1 MHz, VI-O = 0 VDC(11)
II-I
Input-Input Insulation
Leakage Current
RI-I
CI-I
Typ.
Max.
Unit
VACRMS
1011
Ω
1
pF
HCPL2530M, RH ≤ 45%,
HCPL2531M VI-I = 500 VDC, t = 5 s(12)