Is Now Part of
To learn more about ON Semiconductor, please visit our website at
www.onsemi.com
Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers
will need to change in order to meet ON Semiconductor’s system requirements. Since the ON Semiconductor
product management systems do not have the ability to manage part nomenclature that utilizes an underscore
(_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain
device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated
device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please
email any questions regarding the system integration to Fairchild_questions@onsemi.com.
ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number
of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right
to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON
Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON
Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s
technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA
Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended
or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out
of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor
is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
Single-Channel: 6N138M, 6N139M
Dual-Channel: HCPL2730M, HCPL2731M
8-Pin DIP Low Input Current High Gain Split
Darlington Optocouplers
Features
Description
•
•
•
•
•
•
The single-channel, 6N138M, 6N139M and dual-channel
HCPL2730M, HCPL2731M optocouplers consist of an
AlGaAs LED optically coupled to a high gain split darlington photodetector.
Low Current – 0.5 mA
Superior CTR – 2000%
Superior CMR – 10 kV/µs
CTR Guaranteed 0 to 70°C
Dual Channel – HCPL2730M, HCPL2731M
Safety and Regulatory Approvals
– UL1577, 5,000 VACRMS for 1 Minute
– DIN EN/IEC60747-5-5
The split darlington configuration separating the input
photodiode and the first stage gain from the output transistor permits lower output saturation voltage and higher
speed operation than possible with conventional darlington phototransistor optocoupler. In the dual channel
devices, HCPL2730M and HCPL2731M, an integrated
emitter-base resistor provides superior stability over temperature.
Applications
•
•
•
•
•
•
Digital Logic Ground Isolation
Telephone Ring Detector
EIA-RS-232C Line Receiver
High Common Mode Noise Line Receiver
μP Bus Isolation
Current Loop Receiver
The combination of a very low input current of 0.5 mA
and a high current transfer ratio of 2000% makes this
family particularly useful for input interface to MOS,
CMOS, LSTTL and EIA RS232C, while output compatibility is ensured to CMOS as well as high fan-out TTL
requirements. An internal noise shield provides exceptional common mode rejection of 10 kV/μs.
Related Resources
•
•
•
•
www.fairchildsemi.com/products/optoelectronics/
www.fairchildsemi.com/pf/HC/HCPL0700.html
www.fairchildsemi.com/pf/HC/HCPL0730.html
www.fairchildsemi.com/pf/HC/HCPL0731.html
Schematics
N/C 1
Package Outlines
8 VCC
+ 1
8 VCC
VF1
+ 2
8
7 VB
_ 2
6 VO
_
7 V01
8
1
1
VF
_
3
3
6 V02
VF2
N/C 4
5 GND
6N138M / 6N139M
+ 4
5 GND
HCPL2730M / HCPL2731M
Figure 1. Schematics
©2009 Fairchild Semiconductor Corporation
6N138M, 6N139M, HCPL2730M, HCPL2731M Rev. 1.5
8
8
1
1
Figure 2. Package Options
www.fairchildsemi.com
6N138M, 6N139M, HCPL2730M, HCPL2731M — 8-Pin DIP Low Input Current High Gain Split Darlington Optocouplers
August 2016
As per DIN EN/IEC 60747-5-5, this optocoupler is suitable for “safe electrical insulation” only within the safety limit
data. Compliance with the safety ratings shall be ensured by means of protective circuits.
Parameter
Installation Classifications per DIN VDE
0110/1.89 Table 1, For Rated Mains Voltage
Characteristics
< 150 VRMS
I–IV
< 300 VRMS
I–IV
< 450 VRMS
I–III
< 600 VRMS
I–III
< 1,000 VRMS (Option T, TS)
I-III
Climatic Classification
40/100/21
Pollution Degree (DIN VDE 0110/1.89)
2
Comparative Tracking Index
Symbol
175
Value
Unit
Input-to-Output Test Voltage, Method A, VIORM x 1.6 = VPR,
Type and Sample Test with tm = 10 s, Partial Discharge < 5 pC
2,262
Vpeak
Input-to-Output Test Voltage, Method B, VIORM x 1.875 = VPR,
100% Production Test with tm = 1 s, Partial Discharge < 5 pC
2,651
Vpeak
VIORM
Maximum Working Insulation Voltage
1,414
Vpeak
VIOTM
Highest Allowable Over-Voltage
6,000
Vpeak
External Creepage
8.0
mm
External Clearance
7.4
mm
10.16
mm
0.5
mm
VPR
Parameter
External Clearance (for Option TV, 0.4" Lead Spacing)
DTI
TS
IS,INPUT
PS,OUTPUT
RIO
Distance Through Insulation (Insulation Thickness)
Case
Temperature(1)
Input Current(1)
Output Power (Duty Factor 2.7%)(1)
Insulation Resistance at TS, VIO = 500
V(1)
150
°C
200
mA
300
mW
>
109
Note:
1. Safety limit value - maximum values allowed in the event of a failure.
©2009 Fairchild Semiconductor Corporation
6N138M, 6N139M, HCPL2730M, HCPL2731M Rev. 1.5
www.fairchildsemi.com
2
6N138M, 6N139M, HCPL2730M, HCPL2731M — 8-Pin DIP Low Input Current High Gain Split Darlington Optocouplers
Safety and Insulation Ratings
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be
operable above the recommended operating conditions and stressing the parts to these levels is not recommended.
In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability.
The absolute maximum ratings are stress ratings only. TA = 25°C unless otherwise specified.
Symbol
Parameter
Value
Unit
TSTG
Storage Temperature
-40 to +125
°C
TOPR
Operating Temperature
-40 to +100
°C
Junction Temperature
-40 to +125
°C
260 for 10 sec
°C
Value
Unit
TJ
TSOL
Symbol
Lead Solder Temperature
Parameter
Device
EMITTER
IF (avg)
DC/Average Forward Input Current Per Channel All
20
mA
IF (pk)
Peak Forward Input Current Per Channel
(50% duty cycle, 1 ms P.W.)
All
40
mA
IF (trans)
Peak Transient Input Current Per Channel
(≤ 1 μs P.W., 300 pps)
All
1
A
VR
Reverse Input Voltage Per Channel
All
5
V
PD
Input Power Dissipation Per Channel(2)
All
35
mW
Average Output Current Per Channel
All
60
mA
Emitter-Base Reverse Voltage
6N138M,
6N139M
0.5
V
DETECTOR
IO (avg)
VER
VCC, VO
PO
Supply Voltage, Output Voltage
Output Power Dissipation Per Channel
6N138M,
HCPL2730M
-0.5 to 7.0
6N139M,
HCPL2731M
-0.5 to 18.0
All
V
100
mW
Note:
2. No derating required for devices operated within the TOPR specification (6N138M and 6N139M only).
©2009 Fairchild Semiconductor Corporation
6N138M, 6N139M, HCPL2730M, HCPL2731M Rev. 1.5
www.fairchildsemi.com
3
6N138M, 6N139M, HCPL2730M, HCPL2731M — 8-Pin DIP Low Input Current High Gain Split Darlington Optocouplers
Absolute Maximum Ratings
Individual Component Characteristics
(VCC = 5.0 V, TA = 0°C to 70°C unless otherwise specified. Typical value is measured at TA = 25°C.)
Symbol
Parameter
Device
Test Conditions
Min.
Typ.
Max.
1.30
1.70
Unit
EMITTER
VF
BVR
VF / TA
Input Forward Voltage
All
Input Reverse
Breakdown Voltage
All
Temperature Coefficient
All
of Forward Voltage
IF = 1.6 mA, TA = 25°C
IF = 1.6 mA
IR = 10 µA, TA = 25°C
1.75
5.0
IF = 1.6 mA
V
19.0
V
-1.94
mV/°C
DETECTOR
ICCL
ICCH
Logic Low Supply
Current
IF = 1.6 mA, VO = Open,
6N138M,
VCC = 18 V
6N139M
HCPL2730M VCC = 7 V IF1 = IF2 = 1.6 mA,
HCPL2731M VCC = 18 V VO1 = VO2 = Open
Logic High Supply
Current
IF = 0 mA, VO = Open,
6N138M,
VCC = 18 V
6N139M
HCPL2730M VCC = 7 V IF1 = IF2 = 0 mA,
HCPL2731M VCC = 18 V VO1 = VO2 = Open
Transfer Characteristics
Symbol
Parameter
Device
Test Conditions
0.4
1.5
1.25
3
0.0003
10
mA
µA
0.0003
Min.
Typ.
20
Max. Unit
COUPLED
6N138M
IF = 1.6 mA, VO = 0.4 V,
HCPL2730M VCC = 4.5 V
CTR
Current Transfer
Ratio(3)(4)
6N139M
IF = 0.5 mA, VO = 0.4 V,
HCPL2731M VCC = 4.5 V
6N139M
IF = 1.6 mA, VO = 0.4 V,
HCPL2731M VCC = 4.5 V
6N138M
IOH
Logic High Output
Current
HCPL2730M
6N139M
HCPL2731M
IF = 0 mA, VO = VCC = 7 V
IF = 0 mA, VO = VCC = 18 V
IF = 1.6 mA, IO = 4.8 mA,
HCPL2730M VCC = 4.5 V
VOL
Logic Low Output Voltage(4)
400
500
1600
2400
2000
%
3500
1600
2400
0.001
250
µA
6N138M
6N139M
300
IF = 0.5 mA, IO = 2 mA,
VCC = 4.5 V
6N139M
IF = 1.6 mA, IO = 8 mA,
HCPL2731M VCC = 4.5 V
6N139M
IF = 5 mA, IO = 15 mA,
HCPL2731M VCC = 4.5 V
6N139M
IF = 12 mA, IO = 24 mA,
HCPL2731M VCC = 4.5 V
0.0036
0.06
0.05
0.05
0.093
0.08
0.13
0.12
0.18
0.17
100
0.4
0.4
0.4
V
0.4
0.4
Notes:
3. Current Transfer Ratio is defined as a ratio of output collector current, IO, to the forward LED input current, IF, times
100%.
4. Pin 7 open. (6N138M and 6N139M only)
©2009 Fairchild Semiconductor Corporation
6N138M, 6N139M, HCPL2730M, HCPL2731M Rev. 1.5
www.fairchildsemi.com
4
6N138M, 6N139M, HCPL2730M, HCPL2731M — 8-Pin DIP Low Input Current High Gain Split Darlington Optocouplers
Electrical Characteristics
(VCC = 5.0 V, TA = 0°C to 70°C unless otherwise specified. Typical value is measured at TA = 25°C.)
Switching Characteristics
Symbol
Parameter
Device
Propagation Delay
Time to Logic
LOW(4) (Fig. 15)
Max. Unit
0.2
2
0.5
3
6N138M
RL = 2.2 k, IF = 1.6 mA
1.0
15
HCPL2730M,
RL = 2.2 k, IF = 1.6 mA
HCPL2731M
2.5
25
RL = 4.7 k, IF = 0.5 mA
2.5
30
HCPL2731M RL = 4.7 k, IF = 0.5 mA
8.4
120
RL = 270 , IF = 12 mA
1.3
10
HCPL2730M,
RL = 270 , IF = 12 mA
HCPL2731M
1.0
15
6N138M,
HCPL2730M, RL = 2.2 k, IF = 1.6 mA
HCPL2731M
7.3
50
6N139M,
RL = 4.7 k, IF = 0.5 mA
HCPL2731M
13.6
90
6N139M
tPLH
Typ.
RL = 270 , IF = 12 mA
6N139M
Propagation Delay
Time to Logic
HIGH(4) (Fig. 15)
Min.
HCPL2730M,
RL = 270 , IF = 12 mA
HCPL2731M
6N139M
tPHL
Test Conditions
µs
µs
|CMH|
Common Mode
Transient Immunity
All
at Logic High(5)
(Fig. 16)
IF = 0 mA, lVCMl = 10 VP-P,
RL = 2.2 kTA = 25°C
1,000
10,000
V/µs
|CML|
Common Mode
Transient Immunity
All
at Logic Low(5)
(Fig. 16)
IF = 1.6 mA, lVCMl = 10 VP-P,
RL = 2.2 kTA = 25°C
1,000
10,000
V/µs
Note:
5. Common mode transient immunity in logic HIGH level is the maximum tolerable (positive) dVcm/dt on the leading
edge of the common mode pulse signal VCM, to assure that the output will remain in a logic HIGH state
(i.e., VO > 2.0 V). Common mode transient immunity in logic LOW level is the maximum tolerable (negative)
dVcm/dt on the trailing edge of the common mode pulse signal, VCM, to assure that the output will remain in a logic
LOW state (i.e., VO < 0.8 V).
©2009 Fairchild Semiconductor Corporation
6N138M, 6N139M, HCPL2730M, HCPL2731M Rev. 1.5
www.fairchildsemi.com
5
6N138M, 6N139M, HCPL2730M, HCPL2731M — 8-Pin DIP Low Input Current High Gain Split Darlington Optocouplers
Electrical Characteristics (Continued)
Isolation Characteristics (TA = 25°C unless otherwise specified.)
Symbol
Parameter
Device
Test Conditions
VISO
Withstand Insulation
Test Voltage(6)(7)
All
RH 50%, TA = 25°C,
II-O 10 µA, t = 1 min,
f = 50 Hz
RI-O
Resistance
(Input to Output)(6)
All
VI-O = 500 VDC
CI-O
Capacitance
(Input to Output)(6)(8)
All
f = 1 MHz, VI-O = 0 V
II-I
Input-Input Insulation
Leakage Current(9)
RI-I
CI-I
Min.
Typ.
5,000
Max.
Unit
VACRMS
1011
1
pF
HCPL2730M, RH 45%, VI-I = 500 VDC,
HCPL2731M t = 5 sec
0.005
µA
Input-Input
Resistance(9)
HCPL2730M,
VI-I = 500 VDC
HCPL2731M
1011
Input-Input
Capacitance(9)
HCPL2730M,
f = 1 MHz
HCPL2731M
0.03
pF
Notes:
6. Device is considered a two terminal device: Pins 1, 2, 3 and 4 are shorted together and Pins 5, 6, 7 and 8 are shorted
together.
7. 5000 VACRMS for 1 minute duration is equivalent to 6000 VACRMS for 1 second duration.
8. For dual channel devices, CI-O is measured by shorting pins 1 and 2 or pins 3 and 4 together and pins 5 through 8
shorted together.
9. Measured between pins 1 and 2 shorted together, and pins 3 and 4 shorted together.
©2009 Fairchild Semiconductor Corporation
6N138M, 6N139M, HCPL2730M, HCPL2731M Rev. 1.5
www.fairchildsemi.com
6
6N138M, 6N139M, HCPL2730M, HCPL2731M — 8-Pin DIP Low Input Current High Gain Split Darlington Optocouplers
Electrical Characteristics (Continued)
TA = 25°C unless otherwise specified
Current Limiting Resistor Calculations
51RQ,QYHUW 9&&±9')±92/
,)
R2 (Ω) @ OUTPUT CONFIGURATION
INPUT
R1 (Ω) CMOS CMOS
CONFIGURATION
74XX 74LXX 74SXX 74LSXX 74HXX
@ 5 V @ 10 V
5,QYHUW 9&&±92+±9')
,)
5 9&&92/;#,/±,
,/
Where:
V&&1 = Input Supply Voltage
CMOS
@5V
NON-INV. 2000
CMOS
@ 10 V
NON-INV. 5100
74XX
V&&2 = Output Supply Voltage
74LXX
VDF = Diode Forward Voltage
VOL1 = Logic “0” Voltage of Driver
74SXX
VOH1 = Logic “1” Voltage of Driver
IF = Diode Forward Current
74LSXX
VOLX =Saturation Voltage of
Output Transistor
IL = Load Current Through
Resistor R2
74HXX
INV.
INV.
INV.
180
NON-INV. 1800
INV.
100
1000
2200
750
1000
1000
560
NON-INV. 2000
INV.
360
NON-INV. 2000
INV.
180
NON-INV. 2000
INV.
180
V&&2
1
8
2
7
3
6
V&&2
R2
IN
5
Fig. 4 Non-Inverting Logic Interface
©2009 Fairchild Semiconductor Corporation
6N138M, 6N139M, HCPL2730M, HCPL2731M Rev. 1.5
1
8
2
7
3
6
4
5
R2
OUT
R1
OUT
4
1000
Fig. 3 Resistor Values for Logic Interface
V&&1
R1
4700
NON-INV. 2200
I2 = Input Current of Output Gate
IN
510
Fig. 5 Inverting Logic Interface
www.fairchildsemi.com
7
6N138M, 6N139M, HCPL2730M, HCPL2731M — 8-Pin DIP Low Input Current High Gain Split Darlington Optocouplers
Electrical Characteristics (Continued)
100
1.6
IF = 1.6 mA
TA = 110˚C
FORWARD VOLTAGE - VF (V)
FORWARD CURRENT - IF (mA)
TA = 100˚C
10
TA = 85˚C
TA = 70˚C
1
TA = 25˚C
0.1
TA = 0˚C
TA = -40˚C
1.5
1.4
1.3
1.2
0.01
1.0
0.001
1.0
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
-40
-20
FORWARD VOLTAGE - VF (V)
Fig. 6 LED Forward Current vs. Forward Voltage
NCTR - NORMALIZED CURRENT TRANSFER RATIO (%)
CURRENT TRANSFER RATIO - CTR (%)
VCC = 5 V
VO = 0.4 V
TA = 85˚C
TA = 100˚C
2500
TA = 70˚C
TA = 110˚C
2000
TA = 25˚C
1500
TA = 0˚C
1000
500
TA = -40˚C
0
0.01
0.1
1
10
40
60
80
100
1.4
IF = 1.6 mA
VCC = 4.5 V
VO = 0.4 V
Normalized to TA = 25°C
1.2
1.0
0.8
0.6
0.4
-40
100
-20
0
20
40
60
80
100
TEMPERATURE - TA (˚C)
IF - FORWARD CURRENT (mA)
Fig. 9 Normalized Current Transfer Ratio
vs. Ambient Temperature
(6N138M / 6N139M Only)
Fig. 8 Current Transfer Ratio vs. Forward Current
(6N138M / 6N139M Only)
100
2400
2000
IO - OUTPUT CURRENT (mA)
CTR - CURRENT TRANSFER RATIO (%)
20
Fig. 7 LED Forward Voltage vs. Temperature
3500
3000
0
TEMPERATURE - TA (˚C)
1600
1200
800
400
10
TA = 70˚C / 85°C /
100°C / 110°C
TA = 25˚C
1
TA = 0˚C
TA = -40˚C
0
VCC = 5 V
VO = 0.4 V
IF = 1.6 mA
VCC = 5 V
VO = 0.4 V
0
0.01
0
1
10
100
1000
RBE - BASE RESISTANCE (kΩ)
1
10
Fig. 11 Output Current vs. Input Diode Forward Current
(6N138M / 6N139M Only)
Fig. 10 Current Transfer Ratio vs. Base-Emitter Resistance
(6N138M / 6N139M Only)
©2009 Fairchild Semiconductor Corporation
6N138M, 6N139M, HCPL2730M, HCPL2731M Rev. 1.5
0.1
IF - INPUT DIODE FORWARD CURRENT (mA)
www.fairchildsemi.com
8
6N138M, 6N139M, HCPL2730M, HCPL2731M — 8-Pin DIP Low Input Current High Gain Split Darlington Optocouplers
Typical Performance Curves
7
IO - OUTPUT CURRENT (mA)
VCC = 5 V
TA = 25˚C
ICCL - LOGIC LOW SUPPLY CURRENT (mA)
100
Limit of safe
operating region
80
4 mA
5 mA
4.5 mA
3.5 mA
60
3 mA
2.5 mA
40
2 mA
1.5 mA
20
1 mA
0.5 mA
6
5
4
VCC = 18 V
3
VCC = 5 V
2
1
0
0
0
0
1
2
4
6
8
10
12
14
16
2
IF - FORWARD CURRENT (mA)
VO - OUTPUT VOLTAGE (V)
Fig. 13 Logic Low Supply Current vs.
Input Diode Forward Current
(6N138M / 6N139M Only)
Fig. 12 Output Current vs Output Voltage
(6N138M / 6N139M Only)
50
tP - PROPAGATION DELAY (μs)
VCC = 5 V
40
30
tPLH ( IF =0.5 mA, RL= 4.7 kΩ)
20
tPLH ( IF =1. mA, RL= 2.2 kΩ)
10
tPHL ( IF = 0.5 mA, RL = 4.7kΩ)
tPHL ( IF = 1. mA, RL = 2.2kΩ)
0
-40
-40
0
20
40
60
80
100
TA - TEMPERATURE (°C)
Fig. 14 Propagation Delay vs. Temperature
(6N138M / 6N139M Only)
©2009 Fairchild Semiconductor Corporation
6N138M, 6N139M, HCPL2730M, HCPL2731M Rev. 1.5
www.fairchildsemi.com
9
6N138M, 6N139M, HCPL2730M, HCPL2731M — 8-Pin DIP Low Input Current High Gain Split Darlington Optocouplers
Typical Performance Curves (Continued)
Pulse
Generator
tr = 5 ns
Z O = 50 Ω IF
10% Duty
Cycle
I/ < 100 μs
ƒ
1
Noise
Shield
8
2
7
3
6
VCC
VB
Pulse
Generator
tr = 5 ns
Z O = 50 Ω
10% Duty
Cycle
I/ < 100 μs
ƒ
+5 V
Noise
Shield
+
IF
1
8
VF1
-
RL
2
7
3
6
4
5
VCC
+5 V
RL
V01
0.1 μF
VO
VF
VO
VO
IF
MONITOR
0.1 μF
I F Monitor
4
Rm
5
VF2
+
Rm
C L = 15 pF*
GND
Test Circuit for 6N138M, 6N139M
C L = 15 pF*
V02
GND
Test Circuit for HCPL2730M and HCPL2731M
IF
5V
VO
1.5 V
1.5 V
VOL
TPHL
TPLH
Fig. 15 Switching Time Test Circuit
IF
1
Noise
Shield
8
2
A
B
7
VCC
+
+5 V
IF
VB
Noise
Shield
1
8
VCC
VF1
-
RL
+5 V
RL
2
7
V01
A
VF
3
6
B
VO
VO
0.1 μF
VFF
4
5
+
GND
-
VFF
3
6
4
5
VF2
+
-
V02
VO
0.1 μF
GND
VCM
-
+
Pulse Gen
VCM
-
Pulse Gen
Test Circuit for 6N138M and 6N139M
Test Circuit for HCPL2730M and HCPL2731M
VCM 10 V
0V
90%
90%
10%
10%
tr
tf
VO
5V
Switch at A : IF = 0 mA
VO
VOL
Switch at B : I F = 1.6 mA
Fig. 16 Common Mode Immunity Test Circuit
©2009 Fairchild Semiconductor Corporation
6N138M, 6N139M, HCPL2730M, HCPL2731M Rev. 1.5
www.fairchildsemi.com
10
6N138M, 6N139M, HCPL2730M, HCPL2731M — 8-Pin DIP Low Input Current High Gain Split Darlington Optocouplers
Test Circuits
6N138M, 6N139M, HCPL2730M, HCPL2731M — 8-Pin DIP Low Input Current High Gain Split Darlington Optocouplers
Reflow Profile
Temperature (°C)
TP
260
240
TL
220
200
180
160
140
120
100
80
60
40
20
0
Max. Ramp-up Rate = 3°C/S
Max. Ramp-down Rate = 6°C/S
tP
Tsmax
tL
Preheat Area
Tsmin
ts
120
240
360
Time 25°C to Peak
Time (seconds)
Profile Freature
Pb-Free Assembly Profile
Temperature Min. (Tsmin)
150°C
Temperature Max. (Tsmax)
200°C
Time (tS) from (Tsmin to Tsmax)
60–120 seconds
Ramp-up Rate (tL to tP)
3°C/second max.
Liquidous Temperature (TL)
217°C
Time (tL) Maintained Above (TL)
60–150 seconds
Peak Body Package Temperature
260°C +0°C / –5°C
Time (tP) within 5°C of 260°C
30 seconds
Ramp-down Rate (TP to TL)
6°C/second max.
Time 25°C to Peak Temperature
©2009 Fairchild Semiconductor Corporation
6N138M, 6N139M, HCPL2730M, HCPL2731M Rev. 1.5
8 minutes max.
www.fairchildsemi.com
11
Part Number
Package
Packing Method
6N138M
DIP 8-Pin
Tube (50 units per tube)
6N138SM
SMT 8-Pin (Lead Bend)
Tube (50 units per tube)
6N138SDM
SMT 8-Pin (Lead Bend)
Tape and Reel (1,000 units per reel)
6N138VM
DIP 8-Pin, DIN EN/IEC 60747-5-5 Option
Tube (50 units per tube)
6N138SVM
SMT 8-Pin (Lead Bend), DIN EN/IEC 60747-5-5 Option
Tube (50 units per tube)
6N138SDVM
SMT 8-Pin (Lead Bend), DIN EN/IEC 60747-5-5 Option
Tape and Reel (1,000 units per reel)
6N138TVM
DIP 8-Pin, 0.4” Lead Spacing, DIN EN/IEC 60747-5-5 Option
Tube (50 units per tube)
6N138TSVM
SMT 8-Pin, 0.4” Lead Spacing, DIN EN/IEC 60747-5-5 Option
Tube (50 units per tube)
6N138TSR2VM
SMT 8-Pin, 0.4” Lead Spacing, DIN EN/IEC 60747-5-5 Option
Tape and Reel (1,000 units per reel)
Note:
The product orderable part number system listed in this table also applies to the 6N139M, HCPL2730M and
HCPL2731M product families.
Marking Information
1
V
3
6N138
2
XX YY B
6
5
4
Figure 17. Top Mark
Definitions
1
Fairchild Logo
2
Device Number
3
DIN EN/IEC60747-5-5 Option (only appears on component
ordered with this option)
4
Two Digit Year Code, e.g., ‘16’
5
Two Digit Work Week Ranging from ‘01’ to ‘53’
6
Assembly Package Code
©2009 Fairchild Semiconductor Corporation
6N138M, 6N139M, HCPL2730M, HCPL2731M Rev. 1.5
www.fairchildsemi.com
12
6N138M, 6N139M, HCPL2730M, HCPL2731M — 8-Pin DIP Low Input Current High Gain Split Darlington Optocouplers
Ordering Information
D0
P0
t
K0
P2
E
F
A0
W1
d
t
P
User Direction of Feed
Symbol
W
W
B0
Description
D1
Dimension in mm
Tape Width
16.0 ± 0.3
Tape Thickness
0.30 ± 0.05
P0
Sprocket Hole Pitch
D0
Sprocket Hole Diameter
1.55 ± 0.05
4.0 ± 0.1
E
Sprocket Hole Location
1.75 ± 0.10
F
Pocket Location
7.5 ± 0.1
P
Pocket Pitch
12.0 ± 0.1
A0
Pocket Dimensions
2.0 ± 0.1
P2
10.30 ±0.20
10.30 ±0.20
B0
4.90 ±0.20
K0
W1
d
R
Cover Tape Width
13.2 ± 0.2
Cover Tape Thickness
0.1 max
Max. Component Rotation or Tilt
10°
Min. Bending Radius
30
©2009 Fairchild Semiconductor Corporation
6N138M, 6N139M, HCPL2730M, HCPL2731M Rev. 1.5
www.fairchildsemi.com
13
6N138M, 6N139M, HCPL2730M, HCPL2731M — 8-Pin DIP Low Input Current High Gain Split Darlington Optocouplers
Carrier Tape Specifications (Option SD)
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent
coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification
in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: orderlit@onsemi.com
© Semiconductor Components Industries, LLC
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
www.onsemi.com
1
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
www.onsemi.com