74ALVC08MTCX

Is Now Part of To learn more about ON Semiconductor, please visit our website at www.onsemi.com Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers will need to change in order to meet ON Semiconductor’s system requirements. Since the ON Semiconductor product management systems do not have the ability to manage part nomenclature that utilizes an underscore (_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please email any questions regarding the system integration to Fairchild_questions@onsemi.com. ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. Revised February 2005 74ALVC08 Low Voltage Quad 2-Input AND Gate with 3.6V Tolerant Inputs and Outputs General Description Features The ALVC08 contains four 2-input AND gates. This product is designed for low voltage (1.65V to 3.6V) VCC applications with I/O compatibility up to 3.6V ■ 1.65V to 3.6V VCC supply operation The ALVC08 is fabricated with an advanced CMOS technology to achieve high-speed operation while maintaining low CMOS power dissipation. ■ 3.6V tolerant inputs and outputs ■ tPD 2.9 ns max for 3.0V to 3.6V VCC 3.2 ns max for 2.3V to 2.7V VCC 5.3 ns max for 1.65V to 1.95V VCC ■ Power-off high impedance inputs and outputs ■ Uses patented Quiet Series¥ noise/EMI reduction circuitry ■ Latchup conforms to JEDEC JED78 ■ ESD performance: Human body model ! 2000V Machine model ! 250V Ordering Code: Order Number Package Number 74ALVC08M 74ALVC08MTC M14A MTC14 Package Description 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow 14-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering code. Logic Symbol Connection Diagram IEEE/IEC Pin Descriptions Pin Names Description An , Bn Inputs On Outputs Quiet Series¥ is a trademark of Fairchild Semiconductor Corporation. © 2005 Fairchild Semiconductor Corporation DS500644 www.fairchildsemi.com 74ALVC08 Low Voltage Quad 2-Input AND Gate with 3.6V Tolerant Inputs and Outputs September 2001 74ALVC08 Absolute Maximum Ratings(Note 1) Supply Voltage (VCC) DC Input Voltage (VI) Output Voltage (VO) (Note 2) Recommended Operating Conditions (Note 3) 0.5V to 4.6V 0.5V to 4.6V 0.5V to VCC 0.5V Power Supply Operating DC Input Diode Current (IIK) VI  0V 0V to VCC 50 mA Output Voltage (VO) 0V to VCC 50 mA Minimum Input Edge Rate ('t/'V) DC Output Diode Current (IOK) Free Air Operating Temperature (TA) VO  0V DC Output Source/Sink Current VIN r50 mA (IOH/IOL) Supply Pin (I CC or GND) 0.8V to 2.0V, VCC 40qC to 85qC 3.0V 5 ns/V Note 1: The Absolute Maximum Ratings are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated at these limits. The parametric values defined in the Electrical Characteristics tables are not guaranteed at the Absolute Maximum Ratings. The “Recommended Operating Conditions” table will define the conditions for actual device operation. DC VCC or GND Current per Storage Temperature Range (TSTG) 1.65V to 3.6V Input Voltage (VI) r100 mA 65qC to 150qC Note 2: IO Absolute Maximum Rating must be observed, limited to 4.6V. Note 3: Floating or unused control inputs must be held HIGH or LOW. DC Electrical Characteristics Symbol VIH VIL VOH VOL Parameter Conditions HIGH Level Input Voltage LOW Level Input Voltage HIGH Level Output Voltage LOW Level Output Voltage (V) Min 1.65 - 1.95 0.65 x VCC 2.3 - 2.7 1.7 2.7 - 3.6 2.0 Max 0.35 x VCC 2.3 - 2.7 0.7 2.7 - 3.6 0.8 100 PA IOH 4 mA 1.65 1.2 IOH 6 mA 2.3 2.0 IOH 12 mA 2.3 1.7 2.7 2.2 1.65 - 3.6 Units V 1.65 - 1.95 IOH V VCC - 0.2 V 3.0 2.4 IOH 24 mA 3.0 2 IOL 100 PA 1.65 - 3.6 0.2 IOL 4 mA 1.65 0.45 IOL 6 mA 2.3 0.4 IOL 12 mA 2.3 0.7 2.7 0.4 IOL 24 mA 3.0 0.55 3.6 r5.0 PA 3.6 40 PA 3 - 3.6 750 PA II Input Leakage Current 0 d VI d 3.6V ICC Quiescent Supply Current VI 'ICC Increase in ICC per Input VIH www.fairchildsemi.com VCC VCC or GND, IO VCC  0.6V 2 0 V TA Symbol CL Parameter VCC tPHL, tPLH Propagation Delay Max 1.2 2.9 500: CL 3.3V r 0.3V Min 40qC to 85qC, RL 50 pF VCC 2.7V Min VCC 30 pF 2.5V r 0.2V 1.8V r 0.15V VCC Max Min Max Min Max 3.0 1.0 3.2 1.2 5.3 Units ns Capacitance Symbol Parameter TA Conditions CIN Input Capacitance VI CPD Power Dissipation Capacitance f 0V or VCC 10 MHz, CL 50 pF AC Loading and Waveforms 25qC Units VCC Typical 3.3 4.5 3.3 26 2.5 25 1.8 24 pF pF TABLE 1. Values for Figure 1 TEST SWITCH tPLH, tPHL Open FIGURE 1. AC Test Circuit TABLE 2. Variable Matrix (Input Characteristics: f 1MHz; tr tf 2ns; Z0 Symbol 50:) VCC 3.3V r 0.3V 2.7V 2.5V r 0.2V 1.8V r 0.15V Vmi 1.5V 1.5V VCC/2 VCC/2 Vmo 1.5V 1.5V VCC/2 VCC/2 FIGURE 2. Waveform for Inverting and Non-inverting Functions 3 www.fairchildsemi.com 74ALVC08 AC Electrical Characteristics 0.65 A 0.43TYP 14 8 B 6.4 6.10 3.2 1 PIN#1 IDENT 0.2 C B A 7 TOP VIEW 1.65 ALL LEAD TIPS 0.45 RECOMMENDED LAND PATTERN 1.2 MAX 0.30 0.19 ALL LEAD TIPS 0.1 C 0.65 SEE DETAIL A 0.90+0.15 -0.10 0.13 A B 0.20 0.09 C C FRONT VIEW 0.09 MIN NOTES: A. CONFORMS TO JEDEC REGISTRATION MO-153, VARIATION AB, REF NOTE 6 B. DIMENSIONS ARE IN MILLIMETERS. C. DIMENSIONS ARE EXCLUSIVE OF BURRS, MOLD FLASH, AND TIE BAR EXTRUSIONS D. DIMENSIONING AND TOLERANCES PER ANSI Y14.5M, 2009. E. LANDPATTERN STANDARD: SOP65P640X110-14M. F. DRAWING FILE NAME: MKT-MTC14rev7. GAGE PLANE 0.09 MIN 1.00 0.25 SEATING PLANE DETAIL A ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor 19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Email: orderlit@onsemi.com © Semiconductor Components Industries, LLC N. American Technical Support: 800−282−9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81−3−5817−1050 www.onsemi.com 1 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative www.onsemi.com